2x1 Air Conditioner with WiFi Daikin Perfera 2.0 kW 7000 BTU with reference KITDAIPER2MXM40A2020 from the brand DAIKIN
2x1 Air Conditioner with WiFi Daikin Perfera 2.0 kW 7000 BTU with reference KITDAIPER2MXM40A2020 from the brand DAIKIN
2x1 Air Conditioner with WiFi Daikin Perfera 2.0 kW 7000 BTU with reference KITDAIPER2MXM40A2020 from the brand DAIKIN
2x1 Air Conditioner with WiFi Daikin Perfera 2.0 kW 7000 BTU with reference KITDAIPER2MXM40A2020 from the brand DAIKIN
DAIKIN

2x1 Air Conditioner with WiFi Daikin Perfera 2.0 kW 7000 BTU

REF
KITDAIPER2MXM40A2020
(0)
Free shipping
2861.00 €
€2,861.00
€3,834.03
Up to -6% for professionals. Discover it.
Options
Daikin Perfera 2x1 multisplit air conditioner with WiFi, two 2.0 kW units (7000 BTU each), 4.0 kW 2MXM40A9 outdoor unit, R-32 Inverter heat pump and quiet operation.
Buy now and receive it between 11 and December 15
Get +2,861 +5,722 Sumis for the purchase
Receive 2x Sumis for a limited time
More about the product

Information about 2x1 Air Conditioner with WiFi Daikin Perfera 2.0 kW 7000 BTU

The Daikin Perfera 2x1 multisplit air conditioner with WiFi, 2.0 kW + 2.0 kW is a climate control solution designed to provide cooling and heating in two rooms using a single outdoor unit. This set combines two Daikin Perfera FTXM20B indoor units of 2.0 kW each, equivalent to approximately 7000 BTU/h per room, with a Daikin 2MXM40A9 outdoor unit with 4.0 kW of nominal cooling capacity.

Thanks to its Inverter technology, reversible heat pump with R-32 refrigerant and WiFi connectivity, the system lets you enjoy a comfortable temperature all year round. Each indoor unit has individual control of temperature, fan speed and scheduling, adapting to the needs of each room.

The Daikin Perfera range stands out for incorporating advanced comfort and air treatment technologies such as Flash Streamer, two-zone intelligent motion sensor, Comfort+ and 3D airflow distribution. Its ultra-quiet operation, down to just 19 dB(A) in cooling, makes this system especially suitable for bedrooms, children's rooms, home offices and small offices.

Composition of the Daikin Perfera 2x1 air conditioner

This multisplit set is made up of the following units:

  • 2 Daikin Perfera FTXM20B indoor units: wall-mounted units with 2.0 kW cooling class each, equivalent to approximately 6,824 BTU/h per unit, commercially 7000 BTU. They feature WiFi, quiet operation, intelligent presence sensor and Flash Streamer technology.
  • 1 Daikin 2MXM40A9 outdoor unit: Inverter multisplit heat pump with two independent refrigerant connections, R-32 refrigerant and nominal capacity of 4.0 kW in cooling and 4.2 kW in heating.
  • 2 Daikin ARC466A93 wireless remote controls: one for each indoor unit, to individually control temperature and the main climate functions.

The 2x1 multisplit configuration allows you to air-condition two rooms using a single outdoor unit, reducing the space required on facades, terraces and balconies compared with installing two independent split systems.

Main advantages of the Daikin Perfera 2x1 air conditioner

Independent climate control for two rooms

The Daikin Perfera multisplit system allows the two indoor units to be regulated separately, adjusting temperature, fan speed and operating schedules according to the needs of each room.

For example, one 2.0 kW FTXM20B unit can be installed in a bedroom and the second unit in another room, office or study area.

Both units can operate simultaneously, although they must work in the same general cooling or heating mode. It is not possible to cool one room while heating the other.

This configuration allows only the indoor unit in the room that needs climate control to be used, promoting more rational energy use.

Smart WiFi control via Daikin Onecta

The two Daikin Perfera FTXM20B indoor units feature WiFi connectivity so you can manage climate control from a smartphone or tablet using the Daikin Onecta app.

The app allows you to control each indoor unit individually from anywhere with an Internet connection, making temperature management easier even when you are not at home.

Main functions include:

  • Individual on/off control of each indoor unit.
  • Independent temperature adjustment for both rooms.
  • Selection of cooling, heating, fan and dehumidification modes.
  • Fan speed adjustment.
  • Scheduling and weekly programming.
  • Access to the energy monitoring functions available in the app.
  • Control of the main functions via compatible voice assistants such as Amazon Alexa and Google Assistant.

WiFi control makes it easier to adapt operation to the daily habits of occupants and avoid unnecessary consumption in rooms that are not being used.

Flash Streamer technology to improve air quality

The Daikin Perfera FTXM20B indoor units incorporate Flash Streamer technology, an air treatment system that uses high-speed electron discharge and is designed to help reduce certain allergens and odours present in the air.

This technology is complemented by different filtration elements:

  • Silver particle filter: helps capture certain allergens present in the air, such as pollen.
  • Titanium apatite deodorising filter: helps reduce unpleasant odours.
  • Air filter: traps dust particles present in the air circulating through the unit.

The combination of these technologies helps improve indoor air quality and provide a more comfortable environment in the air-conditioned rooms.

To maintain the performance of the filtration system, it is recommended to clean and maintain the filters according to the manufacturer's instructions.

Two-zone intelligent motion sensor

The indoor units include a two-zone intelligent presence sensor that detects the location of people within the room and adapts the direction of the airflow to reduce direct drafts on occupants.

When no presence is detected for a certain period, the unit can automatically activate an energy-saving operation, helping to reduce electricity consumption.

This technology improves comfort and optimises operation without the need to continuously adjust the temperature from the remote control.

Even air distribution with Comfort+ and 3D airflow

Daikin's Comfort+ technology uses dual flaps to improve air distribution in the room and promote a more uniform temperature.

In cooling mode, the flaps can direct the airflow towards the upper part of the room to reduce direct drafts. In heating mode, they adjust their orientation to distribute warm air more effectively.

In addition, the 3D airflow combines automatic vertical and horizontal movement to distribute cold or warm air throughout different areas of the room.

These functions help reduce temperature differences and provide greater thermal comfort during operation.

Ultra-quiet operation at just 19 dB(A)

One of the main features of the Daikin Perfera range is its quiet operation. The two FTXM20B indoor units reach a minimum sound pressure of 19 dB(A) in silent cooling mode.

In heating mode, each unit can operate with a minimum sound pressure of 20 dB(A).

These sound levels make the system especially suitable for bedrooms, children's rooms, home offices and other spaces where discreet climate control is desired.

The silent mode reduces fan speed when rest or room quietness is the priority.

Comfort and energy-saving functions

The Daikin Perfera indoor units include different modes to adapt operation to the needs of each moment:

  • Powerful mode: temporarily increases output to reach the selected temperature more quickly, within the capacity limits of the multisplit system.
  • Econo mode: limits the unit's maximum electrical consumption.
  • Silent mode: reduces fan speed to minimise operating noise.
  • Night mode: adapts operation during sleeping hours.
  • Dehumidification: helps reduce ambient humidity.
  • Fan mode: allows air to circulate in the room without activating cooling or heating.
  • Weekly timer: makes it easy to set personalised operating schedules.
  • Auto restart: restores previous settings after a power interruption.
  • Temperature limit: allows setting adjustment limits to avoid excessively high or low temperatures.
  • Energy-saving standby: function that can reduce consumption when the unit remains in standby mode, depending on the configuration set during installation.

Cooling and heating capacity of the Daikin Perfera 2x1 set

The system combines two 2.0 kW class indoor units, whose sum of individual capacities is 4.0 kW. In this configuration, the combined nominal cooling capacity when both units operate simultaneously is also 4.0 kW, according to Daikin capacity tables for the 20 + 20 class combination with the 2MXM40A9 outdoor unit.

The available capacity is distributed between the indoor units depending on which ones are operating, the thermal demand of each room and the environmental conditions.

Cooling capacity

According to Daikin's official technical tables for the 2MXM40A9 outdoor unit and the 2.0 + 2.0 kW class combination, the nominal reference values are:

  • Minimum cooling capacity: 1.5 kW.
  • Nominal cooling capacity: 4.0 kW, approximately 13,650 BTU/h.
  • Maximum cooling capacity: 4.2 kW.
  • Minimum electrical consumption in cooling: 0.31 kW.
  • Nominal electrical consumption in cooling: 0.97 kW.
  • Maximum reference electrical consumption in cooling: 1.02 kW.
  • Calculated nominal EER: approximately 4.12.

When both indoor units operate simultaneously under nominal conditions, the cooling capacity distribution is:

  • First FTXM20B 2.0 kW unit: 2.0 kW.
  • Second FTXM20B 2.0 kW unit: 2.0 kW.

When only one indoor unit is operating, the available capacity adapts to the demand of that room within the unit's limits. Actual performance depends on indoor temperature, outdoor conditions and installation characteristics.

Heating capacity

The reversible heat pump allows the system to be used during the colder months, with a combined nominal heating capacity of 4.2 kW.

  • Minimum heating capacity: 1.2 kW.
  • Nominal heating capacity: 4.2 kW, approximately 14,330 BTU/h.
  • Maximum heating capacity: 4.6 kW.
  • Minimum electrical consumption in heating: 0.22 kW.
  • Nominal electrical consumption in heating: 0.98 kW.
  • Maximum reference electrical consumption in heating: 1.08 kW.
  • Calculated nominal COP: approximately 4.29.

The nominal heating capacity distribution when both indoor units operate simultaneously is:

  • First FTXM20B 2.0 kW unit: 2.1 kW.
  • Second FTXM20B 2.0 kW unit: 2.1 kW.

These values come from Daikin's official technical tables for the 20 + 20 class combination with the 2MXM40A9 outdoor unit. Capacities and consumption correspond to standard test conditions and may vary depending on indoor and outdoor temperatures and installation characteristics.

Energy efficiency of the Daikin Perfera 2x1 air conditioner

The system uses Inverter technology to regulate compressor speed according to climate control needs, avoiding unnecessary starts and stops and promoting efficient electricity consumption.

As a technical efficiency reference, Daikin publishes the following values for the equivalent FTXM-A generation combination with two class 20 indoor units and a 2MXM40A9 outdoor unit:

  • Reference energy class in cooling: A+++.
  • Reference energy class in heating for medium climate: A++.
  • Reference SEER: 8.53.
  • Reference SCOP for medium climate: 4.64.
  • Design load in cooling (Pdesignc): 4.0 kW.
  • Design load in heating for medium climate (Pdesignh): 3.2 kW.
  • Reference normalised annual consumption in cooling: 164 kWh/year.
  • Reference normalised annual consumption in heating for medium climate: 966 kWh/year.

SEER and SCOP indicators express the seasonal energy performance of climate control equipment. The higher the value, the greater the amount of thermal energy provided for each unit of electrical energy consumed under standard calculation conditions.

The annual consumption figures shown are reference values used to compare equipment and do not represent the guaranteed actual consumption of a home. This will depend on insulation, selected temperatures, operating hours and climatic conditions.

Note on energy efficiency: the above values correspond to the equivalent FTXM-A generation combination, not to a specifically certified energy label for FTXM20B + FTXM20B + 2MXM40A9. The final classification and the SEER and SCOP values for these exact references must be confirmed using the manufacturer's official energy documentation.

Technical specifications of the Daikin FTXM20B 2.0 kW indoor units

The set includes two Daikin Perfera FTXM20B indoor units, designed to air-condition bedrooms, children's rooms, home offices and other spaces with moderate thermal needs.

The following specifications apply to each of the two indoor units:

  • Brand: Daikin.
  • Series: Perfera.
  • Reference: FTXM20B.
  • Quantity: 2 units.
  • Type: wall-mounted indoor unit.
  • Colour: white.
  • Cooling capacity class: 2.0 kW.
  • Cooling equivalent: approximately 6,824 BTU/h, commercially 7000 BTU.
  • Dimensions (H × W × D): 298 × 804 × 252 mm.
  • Weight per unit: 11.5 kg.
  • Nominal electrical consumption of each indoor unit in cooling: 0.019 kW.
  • Nominal electrical consumption of each indoor unit in heating: 0.018 kW.
  • Airflow in cooling (high/medium/low/silent): 11.9 / 8.9 / 6.3 / 4.9 m³/min.
  • Airflow in heating (high/medium/low/silent): 11.4 / 9.2 / 6.9 / 4.9 m³/min.
  • Sound pressure in cooling (high/medium/low/silent): 41 / 33 / 25 / 19 dB(A).
  • Sound pressure in heating (high/medium/low/silent): 39 / 34 / 26 / 20 dB(A).
  • Sound power in cooling: 54 dB(A).
  • Sound power in heating: 53 dB(A).
  • Liquid refrigerant connection: 1/4" (6.4 mm).
  • Gas refrigerant connection: 3/8" (9.5 mm).
  • Condensate drain connection: 16 mm.
  • Wireless remote control: ARC466A93.
  • Connectivity: WiFi via Daikin Onecta app.
  • Comfort technologies: Comfort+, two-zone intelligent motion sensor and 3D airflow.
  • Air treatment: Flash Streamer, silver particle filter and titanium apatite deodorising filter.
  • Additional functions: Powerful mode, Econo mode, silent operation, fan, dehumidification and weekly timer.

The indoor units have a compact wall-mounted design, with a width of 804 mm and a depth of 252 mm, making them easy to integrate into bedrooms and smaller spaces.

Individual control of each unit allows different temperatures and operating schedules to be set, providing greater flexibility of use.

Technical specifications of the Daikin 2MXM40A9 outdoor unit

The Daikin 2MXM40A9 outdoor unit is an Inverter multisplit heat pump designed to connect up to two compatible indoor units via independent refrigerant circuits.

It features a hermetically sealed Swing compressor that adapts its operation to the thermal demand of the rooms, providing cooling and heating using R-32 refrigerant.

  • Brand: Daikin.
  • Reference: 2MXM40A9.
  • Full technical reference: 2MXM40A2V1B9.
  • Type: 2x1 multisplit outdoor unit.
  • Number of connections for indoor units: 2.
  • Nominal cooling capacity of the set: 4.0 kW.
  • Nominal heating capacity of the set: 4.2 kW.
  • Maximum total capacity of connectable indoor classes: 6.0 kW.
  • Sum of the indoor unit classes in this set: 4.0 kW.
  • Technology: Inverter.
  • Compressor: hermetically sealed Swing.
  • Refrigerant: R-32.
  • Factory refrigerant charge: 0.88 kg.
  • Global warming potential (GWP): 675.
  • CO₂ equivalent of the factory charge: approximately 0.60 tonnes.
  • Dimensions (H × W × D): 552 × 852 × 350 mm.
  • Weight: 36 kg.
  • Nominal airflow in cooling: 36 m³/min.
  • Nominal sound pressure in cooling: 46 dB(A).
  • Nominal sound pressure in heating: 48 dB(A).
  • Reference sound power in cooling: 60 dB(A).
  • Power supply: single-phase, 220-240 V, 50 Hz.
  • Reference electrical current for sizing: 9.8 A.
  • Recommended circuit breaker in the manual: 16 A, subject to electrical calculation and current regulations.
  • Outdoor operating temperature in cooling: from -10 °C to +46 °C.
  • Outdoor operating temperature in heating: from -15 °C to +18 °C in wet-bulb temperature conditions, according to the range documentation.
  • Maximum pipe length per indoor unit: 20 metres.
  • Maximum total refrigerant pipe length: 30 metres.

The outdoor unit uses R-32 refrigerant, whose global warming potential is lower than that of R-410A. Installation must comply with the safety and refrigerant handling conditions established by the manufacturer.

Refrigerant connections of the Daikin Perfera 2x1

The Daikin Perfera 2x1 multisplit air conditioner has two independent refrigerant circuits that connect the two FTXM20B indoor units to the 2MXM40A9 outdoor unit.

Connection diameters of the indoor units

  • First Daikin FTXM20B 2.0 kW unit: 1/4" (6.4 mm) liquid connection and 3/8" (9.5 mm) gas connection.
  • Second Daikin FTXM20B 2.0 kW unit: 1/4" (6.4 mm) liquid connection and 3/8" (9.5 mm) gas connection.

Connection diameters of the outdoor unit

The Daikin 2MXM40A9 outdoor unit has two refrigerant ports with the following diameters:

  • Port A: 1/4" (6.4 mm) liquid connection and 3/8" (9.5 mm) gas connection.
  • Port B: 1/4" (6.4 mm) liquid connection and 3/8" (9.5 mm) gas connection.

Installation advantage: the refrigerant connections of the two indoor units match the diameters of both outdoor unit ports. Therefore, no refrigerant reducers are required to connect this combination.

The installer must respect the correspondence between the refrigerant circuits and the wiring of each room, following Daikin's official connection diagram.

Maximum pipe length and permitted height differences

To ensure correct operation of the Daikin Perfera 2x1 system, the installation must comply with the maximum refrigerant pipe lengths and height differences established by Daikin.

  • Maximum pipe length per indoor unit: 20 metres.
  • Maximum total refrigerant pipe length: 30 metres, adding both runs.
  • Minimum pipe length per indoor unit: 3 metres.
  • Maximum height difference between outdoor and indoor units when the outdoor unit is above: 15 metres.
  • Maximum height difference between indoor units when the outdoor unit is above: 7.5 metres.
  • Maximum height difference between outdoor and indoor units when the outdoor unit is below: 7.5 metres.
  • Maximum height difference between indoor units when the outdoor unit is below: 15 metres.
  • Total length covered by the factory refrigerant charge: 20 metres of liquid pipe.
  • Additional refrigerant charge: 20 grams per additional metre when the total of the runs exceeds 20 metres, applying the manufacturer's calculation and rounding procedure.

For example, an installation can be made with a 10-metre refrigerant run to the first FTXM20B unit and another 15-metre run to the second, giving a total length of 25 metres. This layout complies with the manufacturer's length limits, although the height differences and other technical conditions must also be checked.

In this example, the additional refrigerant calculation would be 100 grams of R-32, following the installation manual instructions.

Refrigerant length is calculated by taking the liquid pipe run between the units as the reference, without adding the gas pipe length of the same circuit again.

Insulation of refrigerant piping

Daikin establishes specific requirements for the thermal insulation of refrigerant piping, in order to reduce energy losses and prevent condensation.

  • 1/4" liquid pipes: insulation with a minimum thickness of 10 mm.
  • 3/8" gas pipes: insulation with a minimum thickness of 13 mm.
  • Material: polyethylene foam suitable for refrigeration installations, with thermal resistance of at least 120 °C.
  • Refrigerant piping: seamless copper, phosphorus-deoxidised and suitable for R-32 refrigerant.
  • Minimum wall thickness of 1/4" and 3/8" pipes: 0.8 mm, subject to applicable regulatory and pressure requirements.

When the ambient temperature exceeds 30 °C and relative humidity is above 80%, Daikin specifies a minimum insulation thickness of 20 mm to prevent surface condensation.

The installer must also check the correct condensate drainage, electrical supply and the necessary clearances around the outdoor unit.

What spaces is the Daikin Perfera 2x1 2.0 + 2.0 kW recommended for?

The Daikin Perfera 2x1 multisplit 2.0 + 2.0 kW is especially suitable for homes and offices that need to air-condition two rooms with similar thermal requirements.

A common layout may consist of installing one 2.0 kW FTXM20B unit in the master bedroom and another in a children's room, office or second bedroom.

As a commercial guideline, each 2.0 kW unit may be suitable for rooms of approximately 12 to 20 m², depending on the conditions of the property.

These areas are indicative and do not replace a thermal load calculation. The actual climate control capacity will depend on insulation, orientation, ceiling height, glazing area, occupancy and climatic conditions.

When both indoor units operate simultaneously, the set has a nominal cooling capacity of 4.0 kW and a nominal heating capacity of 4.2 kW.

To ensure proper sizing, it is recommended that a professional calculate the cooling and heating needs of each room before installation.

Installation and required materials

The Daikin Perfera 2x1 set consists of two FTXM20B indoor units and one 2MXM40A9 outdoor unit, together with their corresponding remote controls and the standard accessories supplied by the manufacturer.

The materials required for installation are not included in the composition of the set. Depending on the characteristics of each home or premises, it will be necessary to have copper refrigerant piping, insulation, electrical and interconnection wiring, condensate drain pipes, trunking, outdoor unit supports and fixing elements.

For this configuration, both circuits use 1/4" liquid and 3/8" gas piping, which simplifies the selection of the required refrigerant materials.

Installation must comply with the maximum pipe lengths, height differences, power supply conditions and start-up instructions established by Daikin.

Installation must be carried out by qualified professionals accredited to work with climate control equipment using fluorinated gases, in compliance with current regulations and the manufacturer's official technical instructions.

With its ability to air-condition two rooms, independent WiFi control, Inverter technology, ultra-quiet operation and advanced air treatment technologies, the Daikin Perfera multisplit 2x1 FTXM20B + FTXM20B + 2MXM40A9 air conditioner offers a versatile climate control solution for enjoying cooling and heating all year round.

Specifications
Manufacturer
DAIKIN
Reference
KITDAIPER2MXM40A2020
SKU
KITDAIPER2MXM40A2020
Included products
FTXM20B (2) + 2MXM40A9
Energy efficiency class
A+++
Energy efficiency class (cooling)
A+++
Energy efficiency class (heating)
A++
Set
2x1
Range
Perfera
Reviews
Returns within 30 days
Shop with peace of mind. If something goes wrong, we'll take care of it.
After-sales service
Any questions? Our support team will be happy to help you.
Pay how and when you want
Card, bank transfer, PayPal... Installment? We have them all.
GroupSumi is your online distributor for construction, electrical material and climate control.
All rights reserved © 2026 GroupSumi