

The Schneider Electric Acti9 iCV40N A9DF3620 is a combined residual current circuit breaker with overcurrent protection RCBO 1P+N, 20 A, C curve and 30 mA sensitivity type A-SI. It integrates in a single device the thermal-magnetic protection against overloads and short circuits and the residual current protection against earth leakage currents, simplifying the electrical panel design and reducing the number of devices required.
This reference offers a rated breaking capacity of 6 kA at 230 V AC in accordance with EN/IEC 61009-2-1. Its type A-SI residual current protection, also known as super immune, provides greater immunity to electrical disturbances, reducing the risk of nuisance tripping in installations with electronic equipment and other loads likely to generate interference.
The Acti9 iCV40N combines two essential electrical protection functions in a single device. The thermal-magnetic trip unit protects the circuit against overloads and short circuits, while the residual current function detects earth leakage currents.
This RCBO design allows each circuit to be protected individually without the need to install a separate MCB and RCD, helping to optimize the available space in the panel.
Reference A9DF3620 features a 1 protected pole plus neutral configuration, with the neutral on the left side. Its rated current is 20 A and it uses a C tripping curve.
The magnetic operating threshold is between 5 and 10 times the rated current, a feature suitable for many distribution circuits that may present moderate inrush currents.
The residual current protection offers a sensitivity of 30 mA and belongs to the type A-SI class. This technology is designed to detect residual currents corresponding to type A devices, while also incorporating greater immunity to electrical disturbances that could cause unwanted disconnections.
Schneider Electric especially recommends A-SI technology in installations subject to electrical disturbances or in certain demanding environments. This feature is particularly useful in circuits with electronic loads and equipment that may generate disturbances on the network.
The Schneider Electric A9DF3620 has a rated breaking capacity Icn of 6,000 A at 230 V AC and 50/60 Hz, in accordance with EN/IEC 61009-2-1.
Its service breaking capacity Ics also reaches 6 kA, equivalent to 100% of Icn, offering a high interrupting capacity within the operating conditions specified by Schneider Electric.
The iCV40N A9DF3620 is designed for single-phase installations at 230 V AC, 50/60 Hz. Its rated insulation voltage is 400 V AC and it has an impulse withstand voltage of 4 kV.
The circuit breaker includes local on/off indication and fault indication, making it easier to identify the status of the protected circuit and helping with diagnostics and maintenance operations.
It also features a contact position indicator and a front operating lever.
The A9DF3620 is suitable for isolation in accordance with EN/IEC 61009-2-1. This feature allows it to be used to electrically isolate the protected circuit during maintenance operations, always following the corresponding safety procedures.
The Schneider Electric Acti9 iCV40N is designed for clip-on mounting on a DIN rail. Its width is only 36 mm, allowing thermal-magnetic and residual current protection to be integrated while taking up minimal space inside the panel.
The device allows connection using compatible distribution blocks and comb busbars from both the top and bottom, facilitating electrical organization and distribution in modular panels.
The connection distance between phase and neutral is 9 mm.
The tunnel terminals allow rigid and flexible conductors to be connected from the top or bottom.
The Acti9 iCV40N is designed to provide a long service life inside the electrical panel. Schneider Electric declares a mechanical durability of 20,000 cycles and an electrical durability of 20,000 cycles.
The device has an IP20 protection rating as a standalone component and can reach IP40 when installed inside a suitable modular enclosure.
The Schneider Electric Acti9 iCV40N A9DF3620 is a compact solution for individually protecting electrical circuits against overloads, short circuits and leakage currents. Its 20 A rating, C curve, 30 mA sensitivity, super immune A-SI residual current protection and 6 kA breaking capacity make it suitable for electrical panels that require complete protection and high immunity to disturbances.