IID40 Differential RCCB 1P+N 40A 30mA Class A with reference A9R43640 from the brand SCHNEIDER ELECTRIC
IID40 Differential RCCB 1P+N 40A 30mA Class A with reference A9R43640 from the brand SCHNEIDER ELECTRIC
SCHNEIDER ELECTRIC

IID40 Differential RCCB 1P+N 40A 30mA Class A

REF
A9R43640
(0)
Free shipping
147.00 €
€147.00
€686.49
Up to -12% for professionals. Discover it.
Schneider Electric Acti9 iID40 residual current circuit breaker 1P+N 40 A, 30 mA type A and instantaneous, with VisiTrip and VisiSafe for protection against earth leakage in electrical panels.
Buy now and receive it between 20 and November 23
Express free delivery
Get +147 +294 Sumis for the purchase
Receive 2x Sumis for a limited time
More about the product

Information about IID40 Differential RCCB 1P+N 40A 30mA Class A

The Schneider Electric Acti9 iID40 A9R43640 residual current circuit breaker is a 1P+N, 40 A, 30 mA Type A RCCB designed to detect residual currents and quickly disconnect the circuit when an earth leakage occurs. It operates instantaneously, works on single-phase 230-240 V AC, 50/60 Hz networks, and is especially designed as a group main RCD for residential and commercial distribution boards.

Type A protection can detect both sinusoidal alternating residual currents and pulsating direct residual currents, making it suitable for many modern electrical and electronic loads. As an RCCB, it provides residual current protection but does not include thermal-magnetic protection against overloads or short circuits, so it must be coordinated with the appropriate overcurrent protection devices.

1P+N 40 A 30 mA RCCB

The Schneider Electric A9R43640 features a 1 pole + neutral configuration, with the neutral on the left, and supports a rated current of 40 A. Its 30 mA residual current sensitivity is intended to provide additional protection against risks associated with earth leakage currents.

  • Brand: Schneider Electric.
  • Range: Acti9.
  • Series: iID40.
  • Reference: A9R43640.
  • Type: RCCB residual current circuit breaker.
  • Number of poles: 1P+N.
  • Neutral position: left.
  • Rated current: 40 A.
  • Residual current sensitivity: 30 mA.
  • Residual current class: Type A.
  • Tripping: instantaneous.
  • Rated operational voltage: 230-240 V AC.
  • Frequency: 50/60 Hz.

Type A residual current protection

The Type A classification allows the A9R43640 to detect sinusoidal alternating residual currents and pulsating direct residual currents. This feature is especially important in modern installations, where many devices include electronic power supplies, rectifiers, and other components capable of generating leakage current waveforms other than a pure sinusoidal AC current.

For this reason, this RCCB offers a more suitable solution than a purely Type AC device for many circuits with electronic loads, provided its use matches the design and regulatory requirements of the installation.

30 mA sensitivity and instantaneous tripping

The 30 mA rated sensitivity allows the device to detect small leakage currents and quickly disconnect the circuit. The device has instantaneous operation, with no intentional time delay.

Schneider Electric also specifies voltage-independent residual current tripping technology, so the residual protection mechanism does not rely on auxiliary electronic power to detect the differential current.

RCCB: residual protection without integrated thermal-magnetic protection

The A9R43640 is a pure RCCB. Its function is to detect earth leakage currents, but it does not replace a miniature circuit breaker.

Therefore, to properly protect the circuit against overloads and short circuits, it must be combined with a correctly rated overcurrent protection device, such as a compatible MCB according to the installation characteristics.

1,500 A residual making and breaking capacity

Schneider Electric specifies a rated residual making and breaking capacity Idm of 1,500 A for this reference. It also has a conditional short-circuit current of 10,000 A when used with the appropriate overcurrent protection and under the coordination conditions indicated by the manufacturer.

  • Residual making and breaking capacity Idm: 1,500 A.
  • Conditional short-circuit current: 10 kA.
  • 8/20 µs impulse withstand current: 250 A.

500 V insulation voltage

The Acti9 iID40 A9R43640 has a rated insulation voltage Ui of 500 V AC and a rated impulse withstand voltage Uimp of 6 kV, providing suitable insulation characteristics for integration into low-voltage distribution boards.

  • Insulation voltage Ui: 500 V AC.
  • Impulse withstand voltage Uimp: 6 kV.
  • Pollution degree: 3.

VisiTrip for easier trip identification

The Acti9 iID40 family incorporates VisiTrip technology, which provides a visible indication of device tripping. This signaling makes it easier to locate the affected circuit within the distribution board and speeds up diagnosis and maintenance tasks.

VisiSafe for safer visual verification

The VisiSafe technology uses a visible mechanical indication to confirm contact opening. This feature helps the professional verify the device status during maintenance and circuit isolation operations.

The A9R43640 also includes a contact position indicator and front lever operation.

Designed as a group main residual current device

Schneider Electric positions the iID40 range as a group main solution for modular distribution boards. Its architecture is designed to facilitate electrical distribution in combination with Acti9 iC40 devices and compatible comb systems.

This arrangement makes it possible to create neat, compact boards, reducing certain wiring requirements between the RCCB and the downstream MCBs.

35 mm DIN rail mounting

The residual current device is installed by clip-on mounting on a 35 mm DIN rail, allowing quick integration into modular distribution boards.

  • Mounting: clip-on.
  • Support: 35 mm DIN rail.
  • 9 mm modules: 4.
  • Width: 36 mm.
  • Height: 85 mm.
  • Depth: 73 mm.
  • Recessed depth: 44 mm.
  • Net weight: approximately 195 g.
  • Color: white RAL 9003.

With a width of 36 mm, it occupies the equivalent of two standard 18 mm modules in the board.

Separate terminals for incoming and distribution wiring

The A9R43640 uses tunnel-type terminals and offers connection capacities suited to its role as a group main device.

  • Lower terminals, rigid conductor: 1-35 mm².
  • Lower terminals, flexible conductor: 1-25 mm².
  • Upper terminals, rigid conductor: 1-16 mm².
  • Upper terminals, flexible conductor: 1-10 mm².
  • Strip length: 14 mm.
  • Lower tightening torque: 3.5 Nm.
  • Upper tightening torque: 2 Nm.

High mechanical and electrical durability

The Schneider Electric Acti9 iID40 is designed to provide a long service life in electrical distribution boards.

  • Mechanical durability: 20,000 cycles.
  • Electrical durability: 15,000 cycles.

The device also supports a padlock locking system, useful for certain maintenance and lockout operations.

IP20 protection

The A9R43640 provides an IP20 protection rating according to IEC 60529. Once installed inside a suitable modular enclosure, the assembly can achieve a protection rating of up to IP40.

  • Device protection rating: IP20.
  • Protection rating in modular enclosure: up to IP40.

Wide operating temperature range

The residual current device is designed to operate across a wide temperature range, allowing use in different indoor installation environments.

  • Operating ambient temperature: -25 °C to +60 °C.
  • Storage temperature: -40 °C to +85 °C.
  • Relative humidity: up to 95% at 55 °C.
  • Maximum operating altitude: 2,000 m.

Standards and certifications

The Schneider Electric A9R43640 is manufactured in accordance with the applicable standards for residual current devices without integrated overcurrent protection.

  • EN/IEC 61008-1.
  • EN/IEC 61008-2-1.
  • Certification: CE.
  • Quality label: VDE.

Technical characteristics of the Schneider Electric A9R43640

  • Brand: Schneider Electric.
  • Range: Acti9.
  • Model: iID40.
  • Reference: A9R43640.
  • Product type: RCCB residual current circuit breaker.
  • Configuration: 1P+N.
  • Neutral: left.
  • Rated current: 40 A.
  • Residual current sensitivity: 30 mA.
  • Class: Type A.
  • Tripping: instantaneous.
  • Residual current technology: voltage independent.
  • Rated voltage: 230-240 V AC.
  • Frequency: 50/60 Hz.
  • Idm: 1,500 A.
  • Conditional short-circuit current: 10,000 A.
  • 8/20 µs impulse withstand current: 250 A.
  • Ui: 500 V.
  • Uimp: 6 kV.
  • Position indicator: yes.
  • VisiTrip: yes, within the iID40 range.
  • VisiSafe: yes, within the iID40 range.
  • Actuator: lever.
  • Mounting: clip-on 35 mm DIN rail.
  • Width: 36 mm.
  • Height: 85 mm.
  • Depth: 73 mm.
  • Recessed depth: 44 mm.
  • Weight: 195 g.
  • Protection rating: IP20.
  • Mechanical durability: 20,000 cycles.
  • Electrical durability: 15,000 cycles.
  • Operating temperature: -25 °C to +60 °C.
  • Standards: EN/IEC 61008-1 and EN/IEC 61008-2-1.
  • EAN: 3606481356703.

Type A residual current protection for single-phase boards

The Schneider Electric Acti9 iID40 A9R43640 combines a 40 A rated current, 30 mA sensitivity, and Type A residual current protection in a compact 1P+N format. It is especially suitable for single-phase boards where both alternating leakage and pulsating direct residual currents must be detected.

Its group main design, integration with the Acti9 range, VisiTrip and VisiSafe technologies, and 36 mm width make it easy to build compact, tidy boards in both residential and commercial installations.

Important: this device is an RCCB and therefore provides residual current protection but not overload or short-circuit protection. It must be combined with the appropriate thermal-magnetic protection according to the installation characteristics.

Specifications
Manufacturer
SCHNEIDER ELECTRIC
Reference
A9R43640
SKU
SCHDDC1B60C
Object
Circuit breaker
Tension
220.00 - 240.00 V
Number of poles
1P+N, 1P + N
Assembly
DIN rail. Clip adjustable.
Nominal current
40 A
Network type
AC
Protection rating
IP20
Datasheets
Reviews
Returns within 30 days
Shop with peace of mind. If something goes wrong, we'll take care of it.
After-sales service
Any questions? Our support team will be happy to help you.
Pay how and when you want
Card, bank transfer, PayPal... Installment? We have them all.
GroupSumi is your online distributor for construction, electrical material and climate control.
All rights reserved © 2026 GroupSumi