

The Schneider Electric Acti9 Quick Vigi iC60 A9Q11240 residual current block is an additional module with 2 poles, 40 A and 30 mA type AC sensitivity, designed to add earth leakage protection to compatible circuit breakers in the Acti9 range. Its tripping is instantaneous and it uses voltage-independent tripping technology, providing a compact solution for the protection of people and electrical circuits.
Reference A9Q11240 is installed together with a compatible MCB, forming an assembly that combines residual current protection with overload and short-circuit protection. The Vigi block by itself does not replace a miniature circuit breaker, as its specific function is to detect residual differential currents.
The Schneider Electric A9Q11240 has 2 poles, a rated current of 40 A and a residual current sensitivity of 30 mA. This sensitivity level is intended to provide additional protection for people against risks associated with leakage currents, always within a properly designed and coordinated installation.
Type AC protection is designed to detect sinusoidal alternating residual currents. It is a common solution for circuits with conventional loads where this is the expected fault current type.
In installations with electronic equipment capable of generating pulsating DC components or other residual current waveforms, it may be necessary to use type A, A-SI or other classes, depending on the characteristics of the loads and the regulatory requirements of the installation.
The Quick Vigi iC60 A9Q11240 provides an instantaneous residual current response, with no intentional delay. When the residual current reaches the 30 mA tripping threshold, the block trips the associated circuit breaker.
This feature enables a fast response to leakage currents and is especially suited to additional protection of people.
Schneider Electric uses voltage-independent residual current tripping technology in this block. This means that the detection and tripping function in response to a residual current does not depend on an auxiliary electronic supply to operate.
The A9Q11240 is designed as an accessory for compatible Schneider Electric Acti9 iC60 and Reflex iC60 circuit breakers. The electrical connection between the residual current block and the MCB is made via a plug-in system.
Before configuring the assembly, the specific compatibility between the Vigi block and the selected circuit breaker must be checked, taking into account the number of poles, rated current and characteristics of the main device.
Once correctly paired with a compatible circuit breaker, the assembly can provide:
The final breaking capacity of the assembly is determined by the compatible circuit breaker used and by the complete system configuration.
The block includes local trip indication, making it easier to visually identify a residual current protection trip. This function helps locate the device that has tripped more quickly within panels with multiple protections.
The indication assists the installer during diagnosis, maintenance and installation checks.
The A9Q11240 is designed for AC networks at 50/60 Hz. Schneider Electric specifies the following rated operating voltages according to the reference standard:
The residual current block has insulation characteristics suitable for professional low-voltage installations:
The Schneider Electric Quick Vigi iC60 is designed for DIN rail mounting. Its plug-in connection system with the compatible circuit breaker makes it easy to create a modular protection assembly.
It is also compatible with comb busbar systems in the configurations supported by Schneider Electric, helping to simplify panel wiring.
Reference A9Q11240 occupies 4 modules of 9 mm, equivalent to a width of 36 mm. Its compact design makes it possible to add residual current protection without taking up excessive space in the electrical panel.
The block includes lower tunnel terminals prepared for different conductor types:
The Schneider Electric A9Q11240 has an IP20 protection rating as a standalone device. When correctly installed inside a suitable modular enclosure, the assembly can achieve a protection rating of up to IP40 according to the conditions specified by the manufacturer.
The Quick Vigi iC60 is designed to be part of protection assemblies compliant with IEC 61009-1 and EN 61009-1. Schneider Electric also indicates suitability for isolation in accordance with IEC 61009-1 and IEC 61009-2-1.
The Schneider Electric Acti9 Quick Vigi iC60 A9Q11240 2-pole, 40 A, 30 mA type AC allows you to add high-sensitivity residual current protection to compatible Acti9 circuit breakers. Its instantaneous tripping, voltage-independent technology, trip indicator, plug-in connection and modular format make it easy to configure electrical panels with leakage current protection and additional protection for people.