QUICK VIGI IC60 3P 25A 300mA-AC Residual Current Block with reference A9Q14325 from the brand SCHNEIDER ELECTRIC
QUICK VIGI IC60 3P 25A 300mA-AC Residual Current Block with reference A9Q14325 from the brand SCHNEIDER ELECTRIC
SCHNEIDER ELECTRIC

QUICK VIGI IC60 3P 25A 300mA-AC Residual Current Block

REF
A9Q14325
(0)
Free shipping
247.50 €
€247.50
€611.74
Up to -8% for professionals. Discover it.
Schneider Electric Acti9 Quick Vigi iC60 differential block, 3P, 25 A and 300 mA, type AC and instantaneous. It attaches to iC60 circuit breakers to add residual current protection.
Buy now and receive it between 20 and November 23
Express free delivery
Get +248 +495 Sumis for the purchase
Receive 2x Sumis for a limited time
More about the product

Information about QUICK VIGI IC60 3P 25A 300mA-AC Residual Current Block

The Schneider Electric Acti9 Quick Vigi iC60 A9Q14325 is a residual current block with 3 poles, 25 A and 300 mA sensitivity, designed to be paired with compatible Acti9 iC60 miniature circuit breakers. By combining both devices, you obtain protection against earth leakage currents, in addition to the thermal-magnetic protection provided by the associated circuit breaker.

This model is type AC and features instantaneous residual current tripping. It is designed for AC networks of 400/415 V AC and 50/60 Hz and uses a voltage-independent residual current tripping technology. Its Quick Vigi system makes electrical and mechanical coupling with the compatible circuit breaker easy, providing a modular solution for residential, commercial and professional electrical panels.

300 mA type AC residual current protection

The A9Q14325 has a residual current sensitivity of 300 mA. When it detects an earth leakage current reaching the set operating level, it trips the associated assembly.

Its type AC rating allows it to detect sinusoidal alternating residual currents. The 300 mA sensitivity is commonly used for installation protection and to reduce the risk associated with leakage currents, so it must be selected according to the protection scheme and regulatory requirements of each installation.

Instantaneous tripping

The residual current block features instantaneous operation, with no intentional time delay. This characteristic enables rapid disconnection when a residual current exceeding the set threshold is detected.

Schneider Electric also specifies a voltage-independent residual current tripping technology, so the residual function does not depend on an auxiliary electronic supply to trip.

Designed for Acti9 iC60 miniature circuit breakers

The Quick Vigi A9Q14325 is an additional residual current block and not a standalone miniature circuit breaker. It must be paired with a compatible device to form a complete protection assembly.

Schneider Electric indicates compatibility with:

  • Acti9 iC60.
  • Acti9 Reflex iC60.

The electrical connection to the miniature circuit breaker is made via a plug-in system, simplifying installation and reducing the wiring required between both devices.

3 poles and 25 A rated current

The Schneider Electric A9Q14325 has a 3-pole configuration and a rated current of 25 A. It is mainly intended for three-phase circuits that require residual current protection to be added to a compatible circuit breaker.

The rated operational voltage is 400 V AC according to EN 61009-1 and 400/415 V AC according to IEC 61009-1, with an operating frequency of 50/60 Hz.

Local trip indicator

The block includes a local trip indicator that makes it easy to visually identify a residual current operation. This function helps the installer or maintenance personnel distinguish a disconnection caused by earth leakage and speeds up circuit diagnosis.

Modular DIN rail mounting

The Quick Vigi iC60 is designed for modular installation with clip-on mounting on a DIN rail. The assembly is coupled to the compatible miniature circuit breaker via plug-in connection.

The device occupies 6 modules of 9 mm, equivalent to a width of 54 mm.

  • Height: 91 mm.
  • Width: 54 mm.
  • Depth: 73.5 mm.
  • Net weight: approximately 0.21 kg.
  • Mounting: clip-on DIN rail.

Electrical connections

The lower terminals are tunnel-type and allow different conductor cross-sections to be connected:

  • Rigid conductor: 1 to 25 mm².
  • Flexible conductor without ferrule: 1 to 16 mm².
  • Flexible conductor with ferrule: 1 to 16 mm².
  • Strip length: 14 mm.
  • Tightening torque: 2 Nm.

The device is also compatible with a distribution comb from the bottom, making integration within Acti9 modular systems easier.

Electrical and insulation characteristics

  • Rated current: 25 A.
  • Residual current sensitivity: 300 mA.
  • Residual protection type: AC.
  • Operating time: instantaneous.
  • Rated operational voltage: 400/415 V AC.
  • Frequency: 50/60 Hz.
  • Rated insulation voltage Ui: 500 V AC.
  • Rated impulse withstand voltage Uimp: 6 kV.
  • Tripping technology: voltage independent.

IP20 protection

The A9Q14325 offers an IP20 protection rating as a standalone device. Once correctly installed in a suitable modular enclosure, the assembly can reach IP40 under the conditions defined by Schneider Electric.

It is designed to operate at ambient temperatures between -5 and 60 °C, while the storage range extends from -40 to 85 °C.

Technical characteristics of the Schneider Electric A9Q14325

  • Brand: Schneider Electric.
  • Reference: A9Q14325.
  • Range: Acti9.
  • Product: Quick Vigi iC60.
  • Type: additional residual current block.
  • Number of poles: 3P.
  • Rated current: 25 A.
  • Residual current sensitivity: 300 mA.
  • Residual class: type AC.
  • Residual operation: instantaneous.
  • Network type: AC.
  • Frequency: 50/60 Hz.
  • Rated operational voltage: 400/415 V AC.
  • Insulation voltage Ui: 500 V AC.
  • Rated impulse withstand voltage Uimp: 6 kV.
  • Tripping technology: voltage independent.
  • Signalling: local trip indicator.
  • Compatibility: Acti9 iC60 and Acti9 Reflex iC60.
  • Connection to miniature circuit breaker: plug-in.
  • Mounting: clip-on DIN rail.
  • Width: 54 mm.
  • Height: 91 mm.
  • Depth: 73.5 mm.
  • Weight: approximately 0.21 kg.
  • Rigid conductor: 1-25 mm².
  • Flexible conductor: 1-16 mm².
  • Tightening torque: 2 Nm.
  • Protection rating: IP20; up to IP40 in a suitable modular enclosure.
  • Pollution degree: 3.
  • Operating temperature: -5 to 60 °C.
  • Storage temperature: -40 to 85 °C.
  • Standards: EN 61009-1 and IEC 61009-1.
  • EAN: 3606480393464.

Modular residual current protection for three-phase circuits

The Schneider Electric A9Q14325 allows residual current protection to be added to a compatible Acti9 iC60 miniature circuit breaker without the need to install a separate RCD. Its Quick Vigi design makes coupling easy and helps achieve a compact, tidy assembly inside the electrical panel.

The combination of 3 poles, 25 A, 300 mA sensitivity, type AC, instantaneous tripping and local trip indication makes it a suitable solution for three-phase circuits that require protection against leakage currents within the characteristics defined for the installation.

Specifications
Manufacturer
SCHNEIDER ELECTRIC
Reference
A9Q14325
SKU
SCH653317EF
Object
Differential block
Number of poles
Assembly
Adjustable in DIN rail clip
Nominal current
25 A
Network type
CA
Protection rating
IP20
Frequency
50/60 Hz
Datasheets
Reviews
Returns within 30 days
Shop with peace of mind. If something goes wrong, we'll take care of it.
After-sales service
Any questions? Our support team will be happy to help you.
Pay how and when you want
Card, bank transfer, PayPal... Installment? We have them all.
GroupSumi is your online distributor for construction, electrical material and climate control.
All rights reserved © 2026 GroupSumi