

The Schneider Electric TeSys GB2 GB2CD09 is a thermal-magnetic circuit breaker with 1 pole + neutral and 4 A, specifically designed to protect control circuits in electrical equipment and installations. It combines thermal protection against overloads with magnetic protection against short circuits, offering a compact solution for automation panels, machinery, and control systems.
The GB2CD09 reference features a magnetic trip current of 52 A and a breaking capacity of up to 3 kA at 230/240 V AC. It can operate on both AC and DC networks and is designed for DIN rail or panel mounting.
The TeSys GB2 incorporates a thermal-magnetic trip unit. Thermal protection acts when prolonged overloads occur above the rated current, while magnetic protection provides rapid tripping in the event of high currents caused by short circuits.
In this 4 A model, Schneider Electric specifies a magnetic trip current of 52 A, equivalent to 13 times the rated current.
The Schneider Electric GB2CD09 offers different breaking capacities depending on the operating voltage. According to IEC 60947-2, it reaches a ultimate breaking capacity Icu of 3 kA at 230/240 V AC.
Its service breaking capacity Ics corresponds to 50% of the Icu value under the AC conditions specified by the manufacturer.
The TeSys GB2 GB2CD09 can be used in AC and DC circuits, providing flexibility in control and automation systems.
Its rated operational voltage reaches 250 V AC at 50/60 Hz according to IEC 60947-2 and up to 48 V DC. It also features DC-12 and DC-13 utilization categories according to IEC 60947-5-1.
The GB2CD09 has a compact design intended to facilitate integration into electrical panels with limited space. It can be mounted using clips on a DIN rail or on a panel, in either vertical or horizontal position.
Operation is carried out via a front lever, allowing the protected circuit to be manually switched on and off.
The circuit breaker allows different conductor cross-sections depending on the type of cable used:
The Schneider Electric TeSys GB2 is designed for applications requiring frequent switching operations. The GB2CD09 reference offers a mechanical and electrical durability of up to 8,000 cycles under the conditions specified by the manufacturer.
It also has a power dissipation of approximately 2 W per pole, an important value for calculating thermal dissipation inside the electrical panel.
The device has an IP20 protection rating in accordance with IEC 60529 and is designed to operate within a wide temperature range.
It also offers resistance to vibration and mechanical shock in accordance with the relevant IEC standards, helping ensure reliable operation in machinery and automation panels.
The Schneider Electric GB2CD09 complies with EN/IEC 60947-1 and EN/IEC 60947-2 standards for low-voltage switchgear and controlgear. It also has UL and CSA certifications for applications subject to these regulations.
The Schneider Electric TeSys GB2 GB2CD09 4 A is a compact solution for protecting auxiliary and control circuits against overloads and short circuits. Its thermal-magnetic protection, 52 A magnetic trip, 3 kA breaking capacity at 230/240 V AC, and compatibility with AC and DC networks make it easy to integrate into automation and machinery electrical panels.