

The Schneider Electric GV2ME07 is a motor circuit breaker or thermal-magnetic circuit breaker from the TeSys GV2 / TeSys Deca range, specifically designed for the protection and manual control of electric motors. It features 3 poles, a thermal adjustment range of 1.6 to 2.5 A and magnetic short-circuit protection, combining overload, short-circuit and phase-loss protection in a single device.
With a reference motor power of up to 0.75 kW at 400/415 V AC and a high breaking capacity of up to 100 kA at 400/415 V, the GV2ME07 is a compact solution for automation panels, machinery, pumps, fans and other three-phase motor applications. Its START/STOP pushbutton operation also makes manual circuit control easy.
The GV2ME07 incorporates adjustable thermal protection between 1.6 and 2.5 A. This setting allows the device to be adapted to the rated current of the motor to be protected.
In the event of a sustained overload, the thermal mechanism opens the circuit to prevent excessive current over a prolonged period from causing harmful overheating of the motor and its conductors.
The setting must be made according to the rated current shown on the motor nameplate and taking into account the actual installation conditions.
In addition to thermal protection, the Schneider Electric GV2ME07 includes a fast-acting magnetic trip unit. This function opens the circuit when a high short-circuit current occurs.
The combination of thermal and magnetic protection allows the GV2ME07 to be used as a dedicated motor protection device, avoiding the need for a separate thermal overload relay when the application characteristics are compatible.
The motor circuit breaker has phase-loss sensitivity. This feature is especially important in three-phase motors, as the loss of one phase can cause severe current imbalance and excessive heating of the windings.
Protection against this condition helps reduce the risk of motor damage when anomalies occur in the three-phase supply.
The permissible power depends on the motor supply voltage. Schneider Electric specifies the following reference powers for the GV2ME07:
Network voltage Motor power 400/415 V AC 0.75 kW 500 V AC 1.1 kW 690 V AC 1.5 kWThe final selection of the motor circuit breaker should be made primarily according to the motor rated current, ensuring that it falls within the adjustable range of 1.6 to 2.5 A.
The GV2ME07 offers a high interrupting capacity against short circuits. Schneider Electric specifies a rated ultimate short-circuit breaking capacity Icu of 100 kA at 230/240 V, 400/415 V, 440 V and 500 V AC, in accordance with IEC 60947-2.
Voltage Breaking capacity Icu 230/240 V AC 100 kA 400/415 V AC 100 kA 440 V AC 100 kA 500 V AC 100 kA 690 V AC 3 kAAt 400/415 V, its high breaking capacity makes it suitable for use in electrical panels with significant short-circuit levels, provided the rest of the installation is correctly sized and coordinated.
The Schneider Electric GV2ME07 uses a pushbutton operating mechanism. This design allows manual switching on and off of the power circuit.
The ability to use the motor circuit breaker both as a protection device and for manual control simplifies the construction of certain control panels and small motor starters.
The GV2ME07 uses screw terminals for power circuit connections. This system provides a compact connection suitable for industrial and automation electrical panels.
The tightening torque and conductor cross-sections used must always comply with the instructions included in Schneider Electric’s technical and installation documentation.
The motor circuit breaker can be installed on a DIN rail using a clip, making it easy to integrate into electrical panels alongside contactors, relays, power supplies and other automation components.
It can also be mounted on a plate using the corresponding fixing elements, providing flexibility for different panel designs.
Its width of just 45 mm makes it possible to build compact motor starters and use the available space in the electrical panel efficiently.
Schneider Electric specifies high durability for the GV2 range. The GV2ME07 achieves up to 100,000 mechanical operating cycles and up to 100,000 electrical operating cycles in AC-3 category at 440 V under the manufacturer’s defined conditions.
The GV2ME07 can be combined with Schneider Electric TeSys contactors to form a complete motor starting and protection assembly. Schneider offers different connection blocks and accessories to facilitate the electrical and mechanical coupling between devices.
In these configurations, the motor circuit breaker provides overload and short-circuit protection, while the contactor enables frequent switching operations or motor control via an external control circuit.
The Schneider Electric GV2ME07 is especially suitable for protecting three-phase motors with a rated current between 1.6 and 2.5 A.
Important: the GV2ME07 is a thermal-magnetic motor circuit breaker. It protects against overloads, short circuits and phase loss, but does not include residual current protection against earth leakage currents. When the installation requires residual current protection, the corresponding device must be installed.
The Schneider Electric GV2ME07 is designed in accordance with IEC/EN 60947-2 and IEC/EN 60947-4-1. The range also has international certifications such as UL, CSA, CCC, EAC and marine application certifications, among others, according to Schneider Electric documentation.
The Schneider Electric TeSys GV2ME07 combines thermal-magnetic protection, 1.6 to 2.5 A adjustment, phase-loss sensitivity and high breaking capacity in a compact 45 mm-wide format. It is an especially suitable solution for protecting and controlling three-phase motors up to 0.75 kW at 400/415 V in professional electrical panels.