VIGI IC60 Differential Block 4P 63A 300mA Class AC with reference A9V14463 from the brand SCHNEIDER ELECTRIC
VIGI IC60 Differential Block 4P 63A 300mA Class AC with reference A9V14463 from the brand SCHNEIDER ELECTRIC
SCHNEIDER ELECTRIC

VIGI IC60 Differential Block 4P 63A 300mA Class AC

REF
A9V14463
(0)
Free shipping
253.50 €
€253.50
€824.16
Up to -8% for professionals. Discover it.
Schneider Electric Acti9 Vigi iC60 differential block, 4P, 63 A and 300 mA, type AC and instantaneous. Adds residual current protection to compatible iC60 and Reflex iC60 MCBs.
Buy now and receive it between December 31 and January 4
Get +254 +507 Sumis for the purchase
Receive 2x Sumis for a limited time
More about the product

Information about VIGI IC60 Differential Block 4P 63A 300mA Class AC

The Schneider Electric Acti9 Vigi iC60 A9V14463 residual current block is an additional residual current protection device designed to be associated with Acti9 iC60 and Reflex iC60 thermal-magnetic circuit breakers. It features 4 poles, a rated current of 63 A, residual current sensitivity of 300 mA, and AC type protection, with instantaneous tripping when a residual current reaches the set threshold.

When combined with a compatible MCB, it creates an assembly that integrates the protection against overloads and short circuits provided by the circuit breaker with the protection against earth leakage currents provided by the Vigi block. It is especially suitable for three-phase circuits with neutral in residential, commercial, and professional installations.

4P 63 A 300 mA residual current block

Reference A9V14463 has a 4-pole configuration and supports a rated current of up to 63 A. Its residual current sensitivity is 300 mA, so it is mainly intended to protect installations against leakage currents and the fire risk associated with insulation faults.

It should be noted that a 300 mA RCD does not replace the higher-sensitivity devices required for certain additional personal protection applications. The sensitivity must be selected according to the electrical scheme, the circuit use, and the applicable regulations.

Type AC residual current protection

The Schneider Electric A9V14463 is a type AC device, also commercially known as class CA. It is designed to detect sinusoidal alternating residual currents.

This type of protection must be selected according to the characteristics of the connected loads. In installations with electronic equipment capable of generating residual current components other than a sinusoidal AC signal, other RCD types may be required.

Instantaneous tripping

The Vigi iC60 block offers an instantaneous residual current response, with no intentional time delay. When the leakage current reaches the 300 mA threshold, the device acts on the associated circuit breaker to open the circuit.

Its residual current tripping technology is voltage independent, a feature that allows the residual current function to operate without relying on an auxiliary electronic supply.

Compatible with Acti9 iC60 and Reflex iC60

The A9V14463 is not a standalone residual current circuit breaker, but an additional residual current block. Schneider Electric specifies its association with:

  • Acti9 iC60.
  • Acti9 Reflex iC60.

Electrical connection to the circuit breaker is made by screws, while the assembly is mounted on DIN rail. This modular architecture provides a compact thermal-magnetic and residual current protection solution inside the electrical panel.

For three-phase 400/415 V AC networks

The block is designed for AC networks and operates at a frequency of 50/60 Hz. Schneider Electric specifies a rated operational voltage of:

  • 400 V AC according to EN 61009-1.
  • 400/415 V AC according to IEC 61009-1.

The rated insulation voltage Ui is 500 V AC and the rated impulse withstand voltage Uimp reaches 6 kV.

VisiTrip local trip indicator

The device includes a local trip indicator that makes it possible to visually identify a residual current protection operation. This signaling facilitates diagnosis inside the panel and helps the installer or maintenance personnel quickly locate the affected circuit.

Schneider Electric also highlights the VisiTrip function in this range, through a front window that allows a recent trip to be recognized.

Protection against indirect contact and fire risk

The assembly formed by the compatible circuit breaker and the Vigi block provides complementary protection functions. The residual current block especially helps to:

  • Detect residual currents or earth leakage currents.
  • Protect against indirect contact within the conditions предусмотрed by the installation.
  • Reduce the fire risk related to insulation faults.

Overload and short-circuit protection, on the other hand, is provided by the Acti9 iC60 or Reflex iC60 thermal-magnetic circuit breaker to which the block is attached.

Modular DIN rail mounting

The A9V14463 is designed for clip-on DIN rail mounting. Its modular format allows it to be integrated with the compatible circuit breaker inside distribution boards.

  • Height: 91 mm.
  • Width indicated by Schneider Electric: 135 mm.
  • Depth: 73.5 mm.
  • Weight: approximately 0.245 kg.
  • 9 mm pitches: 7.

These dimensions and weight correspond to the technical data sheet published for this reference.

Conductor connection up to 35 mm²

The lower terminals are tunnel type and accept different cross-sections depending on the conductor type:

  • Rigid conductor without ferrule: from 1 to 35 mm².
  • Flexible conductor without ferrule: from 1 to 25 mm².
  • Flexible conductor with ferrule: from 1 to 25 mm².
  • Strip length: 14 mm.
  • Tightening torque: 3.5 Nm.

It is also compatible with comb busbar and distribution block from the bottom, making integration into Acti9 modular systems easier.

IP20 and IP40 protection in enclosure

The device has an IP20 protection rating as a modular device. When correctly installed inside a suitable modular enclosure, it can reach IP40 according to IEC 60529.

Schneider Electric also specifies pollution degree 3, suitable for use in electrical panels under the intended installation conditions.

Environmental conditions

  • Operating temperature: -5 to 60 °C.
  • Storage temperature: -40 to 85 °C.
  • 8/20 µs impulse withstand: 250 A according to IEC 61009-1.

These characteristics make the Vigi block suitable for a wide range of residential, commercial, and professional distribution boards.

Technical features of Schneider Electric A9V14463

  • Brand: Schneider Electric.
  • Reference: A9V14463.
  • Range: Acti9.
  • Product: Vigi iC60.
  • Type: additional residual current block.
  • Number of poles: 4P.
  • Rated current: 63 A.
  • Residual current sensitivity: 300 mA.
  • Residual current class: type AC / class CA.
  • Tripping time: instantaneous.
  • Tripping technology: voltage independent.
  • Network type: AC.
  • Frequency: 50/60 Hz.
  • Rated operational voltage: 400/415 V AC.
  • Rated insulation voltage Ui: 500 V AC.
  • Rated impulse withstand voltage Uimp: 6 kV.
  • Compatibility: Acti9 iC60 and Acti9 Reflex iC60.
  • Signaling: local trip indicator.
  • Mounting: clip-on DIN rail.
  • Connection to circuit breaker: by screws.
  • Maximum rigid conductor cross-section: 35 mm².
  • Maximum flexible conductor cross-section: 25 mm².
  • Tightening torque: 3.5 Nm.
  • Height: 91 mm.
  • Width: 135 mm according to data sheet.
  • Depth: 73.5 mm.
  • Weight: approximately 0.245 kg.
  • Protection rating: IP20; IP40 when installed in a suitable modular enclosure.
  • Pollution degree: 3.
  • Operating temperature: -5 to 60 °C.
  • Storage temperature: -40 to 85 °C.
  • Standards: IEC 61009-1 and EN 61009-1.
  • GTIN/EAN: 3606480090943.

Residual current protection for Acti9 three-phase circuits

The Schneider Electric A9V14463 allows an Acti9 compatible circuit breaker to be completed with residual current protection. Its 4P, 63 A, 300 mA and type AC configuration is especially suitable for three-phase circuits with neutral where earth leakage monitoring and protection of the installation against insulation faults are required.

Its instantaneous tripping, local operating indicator, voltage-independent technology, and compatibility with iC60 and Reflex iC60 provide a modular solution for professional electrical panels. To obtain overload and short-circuit protection, it must always be installed together with the correctly sized compatible thermal-magnetic circuit breaker.

Specifications
Manufacturer
SCHNEIDER ELECTRIC
Reference
A9V14463
SKU
SCH6379F0ED
Object
Differential block
Number of poles
Assembly
Adjustable in DIN rail clip
Nominal current
63 A
Network type
CA
Protection rating
IP20
Frequency
50/60 Hz
Datasheets
Reviews
Returns within 30 days
Shop with peace of mind. If something goes wrong, we'll take care of it.
After-sales service
Any questions? Our support team will be happy to help you.
Pay how and when you want
Card, bank transfer, PayPal... Installment? We have them all.
GroupSumi is your online distributor for construction, electrical material and climate control.
All rights reserved © 2026 GroupSumi