

The Schneider Electric 13982 is a watertight distribution enclosure from the Kaedra range, designed to house and protect modular switchgear in indoor and outdoor electrical installations. It features 1 row with capacity for 18 modules of 18 mm, surface mounting, and dimensions of 280 mm high, 448 mm wide, and 160 mm deep. Its IP65 protection, IK09 mechanical resistance, and Class II insulation make it suitable for environments where the enclosure may be exposed to dust, moisture, or demanding environmental conditions.
The enclosure is made of self-extinguishing polymer in light grey RAL 7035 and features a distinctive transparent green door that allows the installed devices to be viewed without opening the enclosure. Its modular design is suitable for housing MCBs, RCDs, contactors, and other compatible modular devices installed on DIN rail.
The enclosure has one horizontal row with capacity for 18 modules of 18 mm. This makes it possible to configure a compact electrical panel using different combinations of compatible modular devices.
Inside, it includes a DIN rail to make it easier to secure the switchgear. Depending on the installation requirements, it can house miniature circuit breakers, residual current devices, modular contactors, relays, timers, and other equipment designed for DIN rail mounting.
Feature Value Number of rows 1 Layout Horizontal Total capacity 18 modules Module width 18 mm 9 mm steps 36 Rail type DINThe Schneider Electric 13982 has an IP65 protection rating according to IEC 60529. This classification provides complete protection against dust ingress and a high level of protection against water.
Thanks to these features, the Kaedra enclosure can be used in both indoor and outdoor installations, provided that the mounting, cable entries, and accessories used maintain the sealing conditions specified by the manufacturer.
The enclosure offers IK09 impact resistance, providing additional mechanical protection for the devices installed inside. This feature is especially useful in garages, workshops, warehouses, technical areas, light industrial installations, and other locations where the panel may be exposed to accidental knocks.
The Schneider Electric Kaedra 13982 enclosure has Class II electrical insulation. Its double-insulated construction provides an additional barrier between the electrical parts installed inside and the outside of the enclosure.
This feature, together with its insulating polymer construction, makes the enclosure especially suitable for installations requiring a watertight and electrically insulating enclosure.
The front section includes a transparent green door that allows the status of the installed devices to be checked without opening the enclosure. This makes routine inspections easier and allows quick verification of the position of circuit breakers, residual current devices, and other devices with front indication.
The enclosure uses a light grey RAL 7035 finish, commonly used in electrical panels and distribution systems.
The enclosure is made of self-extinguishing polymer. Schneider Electric specifies for the Kaedra range resistance to fire or abnormal heat of up to 650 °C according to IEC 60695-2-1.
The use of a polymer material also provides an insulating enclosure that is resistant to the usual conditions found in protected electrical installations.
Its 160 mm depth provides enough space for wiring and connecting modular devices, while keeping dimensions suitable for wall-mounted surface installation.
The enclosure has 17 pre-cut PG ISO entry points to make it easier to bring in conductors and conduits. Preparing these entries allows the panel to be adapted to the wiring needs of each installation.
When used in environments where it is necessary to maintain the IP65 rating, cable glands, entries, and accessories with an appropriate sealing rating must be used, and installation must be carried out according to Schneider Electric instructions.
The number and type of devices that can be installed inside should be determined taking into account both the available modular space and the total thermal dissipation of the installed equipment.
The enclosure is supplied ready to make installation of the switchgear and wiring easier. The configuration includes elements for identification, fixing, and connection organization, as well as the terminal system provided by Schneider Electric for this reference.
The Kaedra range also offers different optional accessories that allow the enclosure to be adapted to the specific needs of each project.
The Schneider Electric 13982 is designed for surface wall installation. This system makes it easy to mount on walls and other suitable surfaces without the need for a recessed cutout.
It is especially practical in renovations, garages, warehouses, workshops, premises, technical areas, and other installations where a watertight electrical panel needs to be added on an existing surface.
The Schneider Electric Kaedra 13982 watertight enclosure is especially suitable for electrical panels that require protection against dust, moisture, and impacts, with a capacity of up to 18 modules.
The Kaedra range of watertight enclosures is developed in accordance with the applicable standards for enclosures and electrical panels. Schneider Electric specifies for this range IP65 according to IEC 60529, IK09 according to EN 62262, and compliance with IEC 61439-3, as well as the corresponding requirements for fire behavior and abnormal heat.
The Schneider Electric 13982 Kaedra is a robust solution for creating watertight electrical panels of up to 18 modules. Its IP65 protection, IK09 resistance, Class II double insulation, transparent door, and surface-mount format make it suitable for a wide range of indoor and outdoor installations.