Weatherproof Distribution Box 12 Modules + 3 Openings 90x100mm with reference 13180 from the brand SCHNEIDER ELECTRIC
Weatherproof Distribution Box 12 Modules + 3 Openings 90x100mm with reference 13180 from the brand SCHNEIDER ELECTRIC
SCHNEIDER ELECTRIC

Weatherproof Distribution Box 12 Modules + 3 Openings 90x100mm

REF
13180
(0)
70.59 €
€70.59
€171.37
Up to -6% for professionals. Discover it.
Schneider Electric Kaedra 13180 surface-mounted waterproof enclosure, 12 modules, 3 openings of 90x100 mm, IP65, IK09 and class II, with transparent door for indoor and outdoor use.
Buy now and receive it between 10 and December 14
Get +71 +142 Sumis for the purchase
Receive 2x Sumis for a limited time
More about the product

Information about Weatherproof Distribution Box 12 Modules + 3 Openings 90x100mm

The Schneider Electric Kaedra 13180 waterproof distribution box is a surface-mounted enclosure designed to house modular devices and power sockets in electrical installations that require a high level of protection against dust, moisture, and impacts. It features 1 row for 12 modules of 18 mm and 3 openings of 90 x 100 mm intended for the installation of industrial or domestic sockets and other compatible devices. Its IP65 protection rating, IK09 mechanical resistance, and Class II electrical insulation make it suitable for both indoor and outdoor use within the conditions specified by Schneider Electric.

Reference 13180 belongs to Schneider Electric’s Kaedra family, a range of waterproof enclosures especially designed for distribution boards and assemblies with socket outlets. It is made of self-extinguishing polymer, has a light grey RAL 7035 enclosure, and features a transparent front door that allows the status of the modular devices to be checked visually without opening the box.

Kaedra surface-mounted waterproof box

The Schneider Electric 13180 is designed for surface mounting, so it can be installed directly on walls, panels, and other suitable supports without the need for a recessed housing.

Its configuration is especially suited to installations where the following must be combined:

  • Modular protection and control devices.
  • Industrial power sockets.
  • Compatible domestic socket outlets.
  • Pushbuttons.
  • Pilot lights or signalling elements.
  • Other devices adaptable to the front openings.

12 DIN modules of 18 mm

The box includes 1 horizontal row with capacity for 12 modules of 18 mm, allowing the installation of miniature circuit breakers, residual current devices, and other compatible modular devices.

  • Number of rows: 1.
  • Capacity: 12 modules of 18 mm.
  • Rail type: DIN.

This modular area makes it possible to integrate the electrical protection devices required for the sockets installed in the lower openings within the same assembly.

3 openings of 90 x 100 mm

Reference 13180 incorporates 3 front openings of 90 x 100 mm mainly intended for the installation of socket outlets and compatible accessories.

These openings allow the panel to be configured according to the needs of each installation, making it possible to incorporate industrial sockets, adapters, blanking plates, or other Kaedra range elements.

Includes adapters for 65 x 85 mm sockets

Schneider Electric states that reference 13180 is supplied with 3 ref. 13136 reducing plates, designed to adapt each 90 x 100 mm opening to devices in the 65 x 85 mm format.

This makes it possible to use smaller compatible socket outlets without having to purchase the three reducing plates separately at the outset.

If other configurations are required, Schneider Electric offers specific accessories such as:

  • Reducing plate from 90 x 100 mm to 65 x 85 mm.
  • Reducing plate from 65 x 85 mm to 50 x 50 mm.
  • Blanking plates for 90 x 100 mm openings.
  • Adapters for other compatible socket and mechanism formats.

IP65 protection

The box has an IP65 protection rating in accordance with IEC 60529.

This classification provides:

  • Complete protection against dust ingress.
  • Protection against water jets under the test conditions defined by the standard.

These features make the enclosure suitable for installations exposed to more demanding environments than conventional indoor electrical panels.

Suitable for indoor and outdoor use

Schneider Electric identifies the Kaedra 13180 as an enclosure suitable for indoor and outdoor installations.

When correctly installed and equipped, it can be used in environments such as:

  • Workshops.
  • Garages.
  • Warehouses.
  • Industry.
  • Commercial buildings.
  • Construction sites and temporary installations.
  • Technical areas.
  • Agricultural installations.
  • Protected outdoor spaces within the specified conditions.

IK09 mechanical resistance

In addition to its sealing performance, the enclosure offers IK09 impact resistance.

This level of robustness helps protect the devices housed inside against accidental mechanical impacts, a particularly useful feature in workshops, work areas, and professional environments.

Class II insulation

The Schneider Electric Kaedra 13180 features Class II electrical insulation or double insulation.

The enclosure is made of insulating material and designed to provide an additional protective barrier against electric contact within the configuration intended by the manufacturer.

Self-extinguishing polymer

The housing is made of self-extinguishing polymer, selected for electrical distribution applications.

Schneider Electric specifies resistance to fire and abnormal heat of 650 °C in accordance with IEC 60695-2-1.

The enclosure also offers resistance to ultraviolet radiation, an important feature in applications exposed to sunlight.

Transparent front door

The area intended for modular devices is protected by a transparent door, which allows the panel to be visually inspected without opening the enclosure.

This solution makes it easier to check:

  • The position of miniature circuit breakers.
  • The status of residual current devices.
  • Indicator lights.
  • Trip indications.
  • The overall condition of the installed devices.

Light grey RAL 7035 color

The housing has a light grey RAL 7035 finish, common in professional electrical enclosures and cabinets.

  • Enclosure color: light grey.
  • Color reference: RAL 7035.
  • Door: transparent with the characteristic green tint of the Kaedra range.

17 pre-cut cable entries

The box includes 17 PG ISO knockouts that allow the necessary cable entries for the installation.

Cables can be introduced from both the top and bottom of the enclosure, making it easier to adapt the panel to the routing of the electrical installation.

To maintain the IP65 protection rating, it is essential to use cable glands, cable entries, and accessories compatible with the required sealing level.

Rated current up to 63 A

Schneider Electric specifies a rated current In of up to 63 A for the enclosure.

This value refers to the characteristics of the enclosure assembly under the conditions intended by the manufacturer and does not replace the individual sizing of miniature circuit breakers, residual current devices, sockets, conductors, and other installed components.

Power dissipation of 28 W

The specified power dissipation for the box is 28 W.

This data should be taken into account when designing the panel and selecting the number and type of installed devices, especially when components generate heat during normal operation.

Dimensions of the Schneider Electric 13180

  • Width: 340 mm.
  • Height: 335 mm.
  • Depth: 160 mm.
  • Internal depth: approximately 91 mm.
  • Opening format: 90 x 100 mm.
  • Weight: approximately 2.1 kg.

These dimensions provide enough space to combine modular protection devices with the three areas intended for sockets or mechanisms.

Supplied equipment

The configuration of reference 13180 includes different elements designed to facilitate panel assembly.

Among the documented components for this reference are:

  • DIN rail for the 12 modules.
  • 3 reducing plates for 65 x 85 mm sockets.
  • Plate intended for pushbutton control.
  • Elements for cable fixing and organization.
  • Terminal block support.
  • Marking kit.

The composition of supplied accessories should be checked in the packaging and current Schneider Electric documentation if a specific element is required for the installation.

Terminal block

The commercial documentation for the reference includes a terminal block with 8 outputs to facilitate internal conductor distribution.

The published configuration includes terminals of different capacities, including outputs for conductors up to 10 mm² and 16 mm² depending on the corresponding position.

Optional lock

The box door can be fitted with an optional lock, allowing access to the installed devices to be restricted when required by the application.

This feature can be especially useful in common areas, workshops, public installations, or panels that should only be accessed by authorized personnel.

Expansion capability

The Kaedra architecture is designed to offer flexibility in panel configuration and allows different distribution solutions, socket outlets, and accessories from the range to be combined.

This makes it easier to create assemblies adapted to:

  • Number and type of sockets required.
  • Required protection devices.
  • Signalling functions.
  • Control needs.
  • Cable routing.

Applications of the Schneider Electric 13180 box

The combination of IP65 sealing, IK09 resistance, Class II insulation, and space for modular devices and sockets makes the Kaedra 13180 a particularly versatile solution.

It can be used, among other applications, in:

  • Panels for industrial sockets.
  • Workshops and maintenance areas.
  • Garages.
  • Industrial installations.
  • Small businesses.
  • Warehouses.
  • Residential buildings.
  • Construction sites and building projects.
  • Agricultural installations.
  • Outdoor areas compatible with its environmental conditions.
  • Auxiliary distribution boards.

Schneider Electric 13180 technical characteristics

  • Brand: Schneider Electric.
  • Reference: 13180.
  • Range: Kaedra / Mureva Enclosure.
  • Type: waterproof distribution box for devices and sockets.
  • Mounting: surface-mounted.
  • Number of rows: 1.
  • Modules: 12 modules of 18 mm.
  • Number of openings: 3.
  • Opening size: 90 x 100 mm.
  • Included adapters: 3 reducers for 65 x 85 mm.
  • Rail type: DIN.
  • Rated current: up to 63 A.
  • Power dissipation: 28 W.
  • Material: self-extinguishing polymer.
  • Insulation: Class II, double insulation.
  • Protection rating: IP65.
  • Impact resistance: IK09.
  • Fire and abnormal heat resistance: 650 °C.
  • UV resistance: yes.
  • Number of cable knockouts: 17 PG ISO.
  • Cable entry: top or bottom.
  • Door type: single and transparent.
  • Lock: optional.
  • Housing color: light grey RAL 7035.
  • Width: 340 mm.
  • Height: 335 mm.
  • Depth: 160 mm.
  • Internal depth: approximately 91 mm.
  • Weight: approximately 2.1 kg.
  • Overvoltage category: II.
  • Operating ambient temperature: -25 to 40 °C according to the current product sheet.
  • Installation: indoor and outdoor.
  • Main standards: IEC 61439-3, IEC 60670, IEC 60529, EN 62262, and IEC 60695-2-1.
  • EAN: 3303430131809.

Waterproof enclosure for combining protection and power sockets

The Schneider Electric Kaedra 13180 allows up to 12 modules of devices and three areas for sockets or other devices to be housed in a single enclosure. This arrangement makes it easy to create compact panels in which electrical protection devices can be installed directly alongside the outlets they supply.

Its IP65 protection, IK09 resistance, self-extinguishing housing, and double insulation make it suitable for professional environments and areas with greater exposure to dust, moisture, or impacts than a conventional modular panel.

Important: reference 13180 is an electrical distribution enclosure; the final performance of the panel depends on the devices, sockets, cable glands, adapters, and accessories installed. To preserve the IP65 protection rating, Schneider Electric’s installation instructions must be followed and entry and closing elements with an appropriate sealing rating must be used.

Specifications
Manufacturer
SCHNEIDER ELECTRIC
Reference
13180
SKU
SCH550E78C2
Object
Gift set
Material
Self-extinguishing polymer
Assembly
Surface
Protection rating
IP65
Color
Gray
Intensity
63 A
Insulation
Class II, double insulation
Datasheets
Reviews
Returns within 30 days
Shop with peace of mind. If something goes wrong, we'll take care of it.
After-sales service
Any questions? Our support team will be happy to help you.
Pay how and when you want
Card, bank transfer, PayPal... Installment? We have them all.
GroupSumi is your online distributor for construction, electrical material and climate control.
All rights reserved © 2026 GroupSumi