

The Schneider Electric Acti9 iC40N A9P54740 circuit breaker is a modular miniature circuit breaker designed to protect electrical circuits against overloads and short circuits. It features a 3P+N configuration with 3 protected poles, a rated current of 40 A and a C tripping curve, providing protection for three-phase circuits with neutral in a compact 54 mm-wide format.
This circuit breaker provides a breaking capacity of 6000 A at 400 V AC according to IEC/EN 60898-1 and an Icu breaking capacity of 10 kA at 400 V AC according to IEC/EN 60947-2. It also incorporates Schneider Electric’s VisiTrip and VisiSafe technologies, which make it easy to identify tripping events and visually check the circuit open status.
Reference A9P54740 has a 3P+N configuration. The three phase conductors are thermally and magnetically protected, while the neutral is disconnected simultaneously with the phases.
This configuration makes it possible to protect and disconnect three-phase circuits with neutral using a device of only 3 modules of 18 mm, helping optimize the available space inside the electrical panel.
The Acti9 iC40N A9P54740 uses a C tripping curve, suitable for many distribution circuits and loads that may present moderate inrush currents.
According to IEC/EN 60898-1, magnetic tripping occurs within the range of 5 to 10 times the rated current. Schneider Electric also specifies a magnetic threshold of 8 x In ±20% according to IEC/EN 60947-2.
The circuit breaker incorporates a thermal-magnetic trip unit that combines two essential protection functions:
This combination helps protect downstream conductors and equipment against the main overcurrents that can occur in an electrical installation.
The interrupting capacity of the A9P54740 depends on the standard used to classify the device:
For this reason, the commercial 10 kA rating is correct when referring to breaking capacity according to IEC/EN 60947-2, while according to IEC/EN 60898-1 the nominal value is 6 kA.
The VisiTrip system provides a visual indication when the circuit breaker has operated due to an anomaly. This function helps quickly identify the affected circuit in panels with multiple protections, reducing diagnosis and maintenance times.
The VisiSafe technology makes it possible to visually check the contact status and provides a clear open indication. The A9P54740 is also suitable for isolation according to IEC/EN 60947-2, allowing it to be used as a circuit isolating device within the conditions indicated by Schneider Electric.
The circuit breaker has a limitation class 3 according to IEC/EN 60898-1. This feature limits the energy passing through the circuit during a short circuit, reducing thermal and electrodynamic stresses on downstream conductors and equipment.
One of the standout features of the Acti9 iC40 range is its slim-profile design. The 3P+N configuration occupies only 54 mm in width, equivalent to 3 standard 18 mm modules.
This format frees up space inside electrical panels and makes it easier to add other protection, control, or measurement devices.
The A9P54740 is designed for clip-on DIN rail mounting. Its modular installation makes it easy to integrate alongside other Acti9 components.
Power supply can be connected from the top or bottom through its tunnel terminals, providing flexibility during panel wiring.
The upper and lower terminals accept the following conductor sizes:
The Schneider Electric Acti9 iC40N can be complemented with electrical auxiliaries, signaling accessories, remote monitoring devices, and compatible Vigi residual current blocks.
This modularity makes it possible to expand protection functions when the installation requires status signaling, remote operation, or additional residual current protection.
The A9P54740 is designed for professional installations and offers high mechanical and electrical service life:
The Schneider Electric A9P54740 is a particularly interesting solution for protecting three-phase circuits with neutral when the available space in the panel is limited. Its 3P+N configuration occupies only three modules and combines overload and short-circuit protection with VisiTrip diagnostic and VisiSafe safety functions.
With 40 A, C curve, 6 kA according to IEC/EN 60898-1 and 10 kA according to IEC/EN 60947-2, the Acti9 iC40N offers a compact and expandable solution with auxiliaries and Vigi blocks for residential, commercial, and tertiary electrical distribution installations.