

The Schneider Electric Acti9 iC60H A9F89432 miniature circuit breaker is a four-pole automatic circuit breaker with 4 protected poles, 32 A and C curve, designed to protect electrical circuits against overloads and short circuits. Its high breaking capacity, VisiTrip and VisiSafe signaling systems, and compatibility with Acti9 auxiliaries make it an especially suitable solution for residential, commercial, and industrial electrical panels.
This miniature circuit breaker incorporates thermal-magnetic tripping technology: thermal protection acts against sustained overloads, while magnetic tripping provides a fast response to high currents caused by short circuits.
The Schneider Electric A9F89432 features 4 poles with all 4 poles protected and a rated current of 32 A. Its C tripping curve is suitable for many distribution circuits with loads that may present moderate inrush currents.
The Acti9 iC60H is designed for installations that require a high breaking capacity. For reference A9F89432, Schneider Electric declares a rated breaking capacity Icn of 10 kA at 400 V AC according to IEC/EN 60898-1.
According to IEC/EN 60947-2, its ultimate breaking capacity Icu varies depending on the operating voltage:
These features make the iC60H suitable for panels where a higher interrupting capacity is required than that of conventional miniature circuit breakers with lower breaking capacity.
The circuit breaker incorporates Schneider Electric's VisiTrip technology. This system provides a visual indication that makes it easier to identify the device that has tripped due to an electrical fault.
In panels with numerous circuits, this feature allows the affected protection device to be located more quickly, helping reduce the time needed for diagnosis and maintenance.
The VisiSafe technology provides a visual indication of the physical opening of the contacts. The visible green band confirms the open position of the contacts under the conditions specified by Schneider Electric, facilitating circuit isolation and maintenance operations.
The iC60H is also suitable for isolation according to IEC/EN 60947-2.
The Schneider Electric A9F89432 has a rated insulation voltage Ui of 500 V and a rated impulse withstand voltage Uimp of 6 kV. It also features overvoltage category IV and pollution degree 3.
These characteristics allow the miniature circuit breaker to be integrated into low-voltage electrical distribution systems with demanding insulation and protection requirements.
The Acti9 iC60 range is designed as a modular platform that allows the automatic circuit breaker to be expanded with different Schneider Electric accessories.
The A9F89432 supports the addition of electrical auxiliaries, signaling devices, and remote monitoring, as well as residual current protection through compatible Vigi blocks. In this way, the device can be adapted to electrical panels with greater control, signaling, or protection needs.
The miniature circuit breaker is designed for fixed mounting on a 35 mm DIN rail, allowing easy integration into modular electrical panels.
As a four-pole device, it occupies 4 modules of 18 mm, equivalent to a total width of 72 mm.
The terminals are designed for copper conductor connection. For the 32 to 63 A ratings in the iC60H family, Schneider Electric allows cross-sections of up to 35 mm² for rigid conductors and up to 25 mm² for flexible conductors.
This connection capacity makes it easy to use in properly sized 32 A distribution circuits.
The Schneider Electric A9F89432 offers an IP20 protection rating according to IEC/EN 60529 under the conditions specified by the manufacturer. Its operating ambient temperature range extends approximately from -35 to 70 °C.
These features support its use in a wide variety of electrical panels and environmental conditions, always within Schneider Electric's installation specifications.
The Acti9 iC60H automatic circuit breaker is developed in accordance with the main standards applicable to low-voltage miniature circuit breakers, including IEC/EN 60898-1 and IEC/EN 60947-2.
According to IEC/EN 60898-1, it provides a rated breaking capacity of 10 kA at 400 V AC, while under IEC/EN 60947-2 it reaches a breaking capacity of 15 kA at 380-415 V AC.
The Schneider Electric Acti9 iC60H A9F89432 4-pole, 32 A, C-curve miniature circuit breaker is a high-performance protection solution for electrical installations that require protection against overloads and short circuits. Its 10 kA breaking capacity according to IEC/EN 60898-1 and 15 kA at 380-415 V according to IEC/EN 60947-2, together with VisiTrip and VisiSafe technologies and the possibility of adding Acti9 auxiliaries, make it suitable for professional electrical panels with demanding protection and safety requirements.