

The Schneider Electric Acti9 iC60H A9F89225 thermal-magnetic circuit breaker is a bipolar miniature circuit breaker designed to protect electrical circuits against overloads and short circuits. It features 2 protected poles, a rated current of 25 A, and a C tripping curve, offering a robust solution for residential, commercial, and industrial installations.
This circuit breaker combines thermal protection against overloads and magnetic protection against short circuits. Its high breaking capacity and Schneider Electric’s VisiTrip and VisiSafe technologies make both installation safety and fault identification easier during maintenance work.
The A9F89225 has a 2P configuration, with protection on both poles, and a rated current of 25 A. The C curve provides suitable magnetic tripping for general-purpose circuits and loads that may present moderate inrush currents.
It is suitable for electrical panels where lines and loads need to be protected against overcurrents, both in domestic and commercial, tertiary, and industrial installations.
The Schneider Electric Acti9 iC60H A9F89225 offers a breaking capacity of 10,000 A according to IEC/EN 60898-1 and a breaking capacity of 15 kA according to IEC/EN 60947-2 under the conditions specified by the manufacturer.
The iC60H range also achieves higher breaking capacities depending on the operating voltage. For ratings from 6 to 40 A, Schneider Electric specifies up to 30 kA at 220-240 V AC and 15 kA at 380-415 V AC in accordance with IEC/EN 60947-2.
The thermal-magnetic breaker incorporates the safety and diagnostic solutions characteristic of the Acti9 range:
In addition, the device is suitable for industrial isolation functions in accordance with IEC/EN 60947-2.
The Acti9 iC60 range allows the circuit breaker functions to be expanded with accessories. The A9F89225 supports the addition of signaling auxiliaries and remote trip auxiliaries, as well as compatible monitoring devices and Vigi residual current protection blocks.
This modularity makes it easier to create more complete protection and control solutions within the electrical panel, adapting to different automation and safety needs.
The Schneider Electric A9F89225 is suitable for protecting distribution circuits, electrical lines, and loads in homes, shops, offices, tertiary buildings, and industrial installations. Its bipolar configuration allows both poles of the circuit to be switched and protected simultaneously.
The combination of 25 A, C curve, 2 poles, high breaking capacity, and VisiTrip and VisiSafe technologies makes the Acti9 iC60H an especially suitable solution for installations that require reliable, modular thermal-magnetic protection ready to be expanded with control or residual current protection accessories.