

The Schneider Electric Acti9 iC60L A9F94410 thermal-magnetic circuit breaker is a modular automatic switch with 4 protected poles, 10 A and C curve, designed to protect electrical circuits against overloads and short circuits. Its high breaking capacity, thermal-magnetic tripping technology, and VisiTrip and VisiSafe signaling systems make it an especially suitable solution for residential and commercial electrical panels, as well as other installations that require a high level of protection.
This thermal-magnetic circuit breaker from the Acti9 iC60L range offers a rated breaking capacity Icn of 15 kA at 400 V AC according to IEC/EN 60898-1 and an ultimate breaking capacity Icu of 25 kA at 380-415 V AC according to IEC/EN 60947-2. At 220-240 V AC, its Icu breaking capacity can reach 50 kA, providing a high ability to interrupt short-circuit currents.
The Schneider Electric iC60L A9F94410 uses a thermal-magnetic trip unit. Thermal protection acts against prolonged overloads, while magnetic protection responds quickly to high currents caused by a short circuit.
Its C tripping curve makes it suitable for many electrical distribution circuits and loads that may present moderate inrush currents. Schneider Electric specifies a magnetic threshold for this reference of 8 times the rated current, with a tolerance of ±20%.
The A9F94410 features 4 poles and 4 protected poles, allowing simultaneous disconnection of all of them. Its rated current is 10 A, so it can be integrated into three-phase installations with neutral or other configurations compatible with its electrical characteristics.
The iC60L version is designed for installations where a high capacity to interrupt short-circuit currents is required. Its main breaking capacity values include:
These features make it possible to use the circuit breaker in installations where the expected short-circuit currents may be higher than those allowed by conventional automatic switches with lower breaking capacity.
The VisiTrip system makes it easy to locate the device that has tripped inside the electrical panel. This visual indication allows the affected circuit to be identified more quickly, reducing the time needed to locate a fault and carry out maintenance tasks.
The switch also incorporates local trip indication and a contact position indicator, making it easier to visually check the device status.
The VisiSafe technology of the Acti9 range is designed to improve safety during operation and maintenance tasks. The A9F94410 also features isolation suitability in accordance with the applicable standards, allowing it to be used as an isolating element within the conditions specified by Schneider Electric.
The modular design of the Acti9 range makes it possible to expand the circuit breaker’s functions with different compatible accessories and auxiliaries. The A9F94410 supports integration with signaling auxiliaries, control and remote monitoring devices, and Vigi residual current blocks, allowing the protection system to be adapted to the needs of each electrical panel.
It can also be used with Acti9 control and signaling accessories, making it easier to create more complete protection and control solutions.
The Schneider Electric iC60L circuit breaker is designed for fixed DIN rail mounting, making it easy to integrate into modular electrical panels. Connection can be made from the top or bottom, and the device is compatible with suitable Acti9 distribution systems and comb busbars.
The terminals are designed to accept different conductor cross-sections and allow connection from either the top or the bottom of the device.
The Schneider Electric A9F94410 is suitable for AC and DC installations within the values specified by the manufacturer. In AC, it operates at a nominal frequency of 50/60 Hz.
The Acti9 iC60L is designed to provide a long service life in demanding electrical installations. Schneider Electric specifies a mechanical durability of up to 20,000 cycles and an electrical durability of up to 10,000 cycles.
Its modular design and the build quality of the Acti9 range make it a suitable solution for both new installations and electrical panel expansions and renovations.
The Schneider Electric Acti9 iC60L A9F94410 thermal-magnetic circuit breaker complies with the main standards applicable to miniature circuit breakers for electrical installations, including IEC/EN 60898-1 and IEC/EN 60947-2.
The Schneider Electric Acti9 iC60L 4P 10A C curve thermal-magnetic circuit breaker stands out for combining high breaking capacity with VisiTrip and VisiSafe technologies and the possibility of adding different Acti9 auxiliaries. It is an especially suitable option for installations that require reliable protection against overloads and short circuits, high interrupting capacity, and easy maintenance.