

The Schneider Electric Acti9 iC60N A9F79440 circuit breaker is a modular 4-pole, 40 A, C-curve miniature circuit breaker designed to protect electrical circuits against overloads and short circuits. Its four poles are protected by thermal-magnetic tripping technology and it offers a breaking capacity of 6 kA according to IEC/EN 60898-1 and 10 kA at 380-415 V according to IEC/EN 60947-2.
It is part of Schneider Electric’s professional Acti9 iC60 range and is suitable for residential, commercial, and industrial electrical panels. It incorporates technologies such as VisiTrip to make tripped circuits easy to identify, VisiSafe to provide reliable indication of contact opening, and a fast-closing mechanism independent of manual operating speed.
The A9F79440 has a 4P configuration with all four poles protected. This design allows the four conductors of the circuit to be protected and disconnected simultaneously by a single device.
Its rated current of 40 A makes it suitable for lines correctly sized for this current. The selection of the circuit breaker must be made together with conductor cross-section, installation method, ambient temperature, voltage drop, and expected short-circuit current.
The Acti9 iC60N uses a thermal-magnetic tripping system that combines two types of protection.
The thermal element acts against sustained overloads that can cause excessive heating of the conductors. The magnetic trip responds quickly to high currents produced by a short circuit.
In this way, the A9F79440 protects the installation against two of the main overcurrent situations that can occur in an electrical circuit.
The A9F79440 reference uses a C curve. Schneider Electric specifies a magnetic tripping threshold of approximately 8 x In ±20%.
The C curve is common in general distribution circuits and allows certain transient inrush currents without nuisance tripping, provided the installation and load are compatible.
According to the IEC/EN 60898-1 standard, Schneider Electric specifies for this reference a rated breaking capacity Icn of 6000 A at 400 V AC.
This is the value to use when the device is evaluated according to this standard for circuit breakers intended for domestic and similar installations.
According to the industrial IEC/EN 60947-2 standard, the ultimate breaking capacity Icu of the A9F79440 varies depending on voltage:
For this reason, the commercial designation 6 kA / 10 kA is not contradictory: the two values correspond to different standards and test conditions.
The iC60N belongs to limiting class 3 according to IEC/EN 60898-1. Current limiting capability helps reduce the energy that passes through the circuit during certain short circuits.
Lower let-through energy reduces the thermal and electrodynamic stresses imposed on downstream conductors and equipment.
The Acti9 iC60 range includes VisiTrip, a front indicator designed to make it easy to identify a circuit that has tripped due to an electrical fault.
This indication can reduce the time needed to locate the protection device that has operated within a panel with many circuits.
The VisiSafe system provides a visual indication associated with the physical opening of the contacts.
This function is intended to increase safety during downstream maintenance operations on the circuit breaker, always respecting the required lockout and absence-of-voltage verification procedures.
The closing mechanism of the Acti9 iC60N is designed so that the contact closing speed is independent of how quickly the user operates the lever.
This feature improves contact closing repeatability and contributes to the device’s electrical durability.
The Schneider Electric A9F79440 is declared suitable for isolation or disconnection in accordance with IEC/EN 60898-1 and IEC/EN 60947-2.
In addition to protecting against overcurrents, it can form part of the circuit isolation functions within the conditions established by the manufacturer and applicable standards.
These characteristics allow the circuit breaker to be integrated into professional distribution panels within its rated operating conditions.
The A9F79440 is installed by clip-on mounting on a symmetrical DIN rail, making installation, replacement, and integration with other modular Acti9 devices easier.
It occupies 8 x 9 mm pitches, equivalent to four standard 18 mm modules.
The circuit breaker uses upper and lower connection terminals suitable for copper conductors.
The final conductor cross-section must be calculated according to design current, installation method, temperature, grouping, length, and applicable electrical regulations.
The modular design of Acti9 allows the A9F79440 to be integrated with distribution systems using compatible comb busbars or busbars, making it easier to supply multiple devices in an orderly way within the same panel.
The iC60N can be complemented with different accessories and auxiliaries from the Acti9 range, allowing functions such as:
Accessories must be selected by specifically checking their compatibility with the iC60 series.
The A9F79440 is a circuit breaker and therefore its main function is protection against overloads and short circuits. It does not include residual current protection as standard.
When the installation requires protection against earth leakage currents, it can be combined with compatible residual current solutions, such as Vigi Acti9 blocks, or installed together with the appropriate residual current device.
Schneider Electric specifies for the iC60N range a high number of operating cycles:
These features make it suitable for use in residential, commercial, and industrial panels with a long expected service life.
The device has an IP20 protection rating according to IEC 60529.
When correctly installed inside a compatible enclosure, front protection can reach IP40, depending on the characteristics of the panel used.
The Acti9 iC60N is designed to operate over a wide temperature range:
Thanks to its 4-pole configuration, 40 A rating, and C curve, it can be used in many correctly sized electrical distribution installations:
The Schneider Electric A9F79440 is specified in accordance with:
The Schneider Electric A9F79440 combines four protected poles, 40 A rated current, and C curve in a modular device designed for demanding distribution installations. Its thermal-magnetic protection acts against overloads and short circuits, while its breaking capacity reaches 6 kA according to IEC/EN 60898-1 and 10 kA at 380-415 V according to IEC/EN 60947-2.
VisiTrip and VisiSafe technologies, suitability for isolation, terminals for rigid conductors up to 35 mm², compatibility with Acti9 auxiliaries, and high durability make it easy to integrate into residential, commercial, and industrial panels. For correct selection, always check the design current, conductor cross-section, tripping curve, and available short-circuit current at the installation point.