

The Schneider Electric Acti9 iC60N A9F74602 miniature circuit breaker is a modular 1P+N, 2 A, C-curve automatic circuit breaker designed to protect electrical circuits against overloads and short circuits. It operates at a rated voltage of 230 V AC and offers a breaking capacity of 6 kA according to IEC/EN 60898-1 and up to 50 kA according to IEC/EN 60947-2, providing a compact protection solution for electrical distribution boards.
It belongs to Schneider Electric’s Acti9 iC60N range and incorporates technologies such as VisiTrip, which makes it easy to quickly identify a tripped circuit, and VisiSafe, designed to provide reliable indication of contact status. In addition, it supports the addition of electrical auxiliaries, monitoring systems, and compatible Vigi residual current blocks.
The Acti9 iC60N combines thermal protection against overloads and magnetic protection against short circuits in a single device. When the current exceeds the permitted value for a certain period of time, the thermal mechanism opens the circuit. In the event of a high short-circuit current, the magnetic trip acts quickly to limit the effects of the fault.
Its rated current of 2 A makes it suitable for properly sized low-current circuits, while the C-curve trip characteristic defines the breaker’s response to instantaneous overcurrents.
The 1P+N configuration has two mechanically linked poles: a protected phase pole with thermomagnetic tripping and a neutral pole that disconnects simultaneously when the breaker opens.
This arrangement allows phase and neutral to be disconnected together in single-phase circuits, while maintaining overcurrent protection on the phase conductor. Schneider Electric specifies the neutral on the left-hand side of the device.
For applications evaluated according to IEC/EN 60898-1, the A9F74602 has a rated breaking capacity Icn of 6,000 A at 230 V AC. This value represents the short-circuit current that the miniature circuit breaker can interrupt within the conditions established by that standard.
The device also features energy limiting class 3, the highest category covered by IEC/EN 60898-1 for this parameter, helping to limit the energy passing through the circuit during a short circuit.
In applications evaluated in accordance with IEC/EN 60947-2, Schneider Electric specifies an ultimate breaking capacity Icu of up to 50 kA for the iC60N A9F74602 in the voltage ranges indicated by the manufacturer.
The miniature circuit breaker is also suitable for isolation according to IEC/EN 60947-2, allowing it to be used in installations where this function is required, always respecting the design and safety conditions defined by the standard and by Schneider Electric.
The VisiTrip system makes it easy to locate the circuit that has tripped due to an anomaly. This visual indication allows the affected miniature circuit breaker to be quickly identified within a panel with multiple protections, helping reduce the time needed to locate a fault.
This function is especially useful in distribution boards with numerous circuits, where quickly identifying the affected outgoing circuit can simplify maintenance tasks.
The Acti9 iC60N also incorporates Schneider Electric’s VisiSafe technology. This system is designed to provide reliable indication of contact position and improve safety during circuit isolation operations.
The combination of VisiSafe with isolation capability helps facilitate maintenance and inspection work on properly designed electrical installations.
The Acti9 iC60 range allows different accessories and auxiliaries to be added to expand the breaker’s functions. Depending on the panel configuration, it can be combined with:
This modularity makes it easier to integrate the miniature circuit breaker into panels that require additional signaling, control, or residual current protection functions.
The Schneider Electric A9F74602 is designed for fixed mounting on a DIN rail, allowing quick integration into modular electrical panels. It occupies 2 modules of 18 mm, equivalent to a total width of 36 mm.
The device can be combined with compatible distribution systems and comb busbars from the Acti9 range, making it easier to supply several devices within the panel and reducing wiring where the installation design allows it.
Its modular format makes installation alongside other protection and control devices inside compatible electrical enclosures easier.
The miniature circuit breaker includes screw terminals at both the top and bottom. It accepts different conductor cross-sections depending on the type of cable used:
The final conductor cross-section should be selected according to the circuit current, installation method, and applicable electrical regulations.
Schneider Electric specifies for the iC60N range a mechanical durability of up to 20,000 cycles and an electrical durability of up to 10,000 cycles. Its quick-make mechanism is independent of the manual operating speed of the lever.
These features are intended to maintain stable operation throughout the device’s expected service life under the conditions established by the manufacturer.
The A9F74602 is designed to operate over a wide temperature range:
The device has an IP20 protection rating according to IEC 60529. Once installed in a suitable enclosure, the accessible protection rating will depend on the characteristics of the electrical panel used.
The product is designed to be installed inside electrical panels and enclosures that provide the mechanical and environmental protection required by the location.
The Schneider Electric Acti9 iC60N A9F74602 combines overload and short-circuit protection, phase and neutral disconnection, and a modular two-space format for easy integration into electrical panels. Its VisiTrip and VisiSafe systems help identify trips and check the device status, while compatibility with auxiliaries and Vigi blocks allows the installation to be expanded according to project needs.
With 2 A rated current, C curve, 6 kA according to IEC/EN 60898-1 and up to 50 kA according to IEC/EN 60947-2, it is a protection solution for properly sized circuits that require a compact 1P+N miniature circuit breaker belonging to Schneider Electric’s modular Acti9 system.