

The Schneider Electric Acti9 iC60N A9F74204 miniature circuit breaker is a modular automatic switch designed to protect electrical circuits against overloads and short circuits. It features 2 protected poles, a rated current of 4 A, and C tripping curve, combining thermal and magnetic protection in a compact device for distribution boards.
Its breaking capacity reaches 6000 A at 400 V AC according to IEC/EN 60898-1. In accordance with IEC/EN 60947-2, it also offers an Icu breaking capacity of up to 50 kA at 220-240 V AC and 380-415 V AC, delivering high performance for professional applications. It also incorporates Schneider Electric’s VisiTrip and VisiSafe technologies, designed to simplify fault diagnosis and increase safety during maintenance tasks.
The A9F74204 reference features a 2P configuration with both poles protected. Its 4 A rated current makes it suitable for protecting properly sized low-current circuits, while the C curve provides suitable performance for many distribution loads with moderate inrush currents.
Tripping is carried out by a thermal-magnetic unit. The thermal part acts against prolonged overloads, while the magnetic protection responds quickly to high short-circuit currents.
The magnetic tripping threshold specified by Schneider Electric is 8 times the rated current ±20%.
The Acti9 iC60N A9F74204 offers a rated breaking capacity Icn of 6 kA at 400 V AC in accordance with IEC/EN 60898-1. This capacity makes it possible to interrupt high short-circuit currents within the conditions established by the standard.
According to IEC/EN 60947-2, Schneider Electric also specifies the following Icu breaking capacity values:
These performance levels make the miniature circuit breaker suitable for residential and commercial applications as well as certain professional and industrial electrical panels.
The miniature circuit breaker includes two hallmark Acti9 systems designed to improve safety and streamline maintenance work.
These functions are especially useful in panels with numerous circuits, where quickly identifying the tripped device can reduce intervention times.
The A9F74204 is suitable for isolation in accordance with IEC/EN 60898-1 and IEC/EN 60947-2. This means it can be used not only for overcurrent protection, but also as a circuit isolation device within the conditions established by the manufacturer.
Its quick-make mechanism, independent of the operating speed of the handle, helps reduce contact wear and increase the service life of the device.
The Schneider Electric Acti9 iC60N features a class 3 current limiting rating in accordance with IEC/EN 60898-1. This high limiting capability helps reduce the energy passing through the circuit during a short circuit, lowering the thermal and electrodynamic stresses borne by cables and downstream equipment.
The miniature circuit breaker is designed for fixed mounting on a DIN rail and occupies 4 modules of 9 mm, equivalent to 2 standard 18 mm modules.
Its modular format makes installation in distribution boards easy alongside residual current devices, contactors, auxiliaries, and other Acti9 range devices.
The A9F74204 includes upper and lower terminals that allow different conductor cross-sections to be connected:
It is also compatible with comb busbar distribution systems at the top or bottom, making it easier to supply several devices within the same panel.
The Acti9 iC60 range allows the addition of electrical auxiliaries, signaling devices, remote tripping systems, and compatible Vigi residual current blocks. This makes it possible to expand the functions of the circuit breaker when the project requires remote monitoring, residual current protection, or additional automation.
Schneider Electric specifies a mechanical durability of up to 20,000 cycles and an electrical durability of up to 10,000 cycles, providing a long service life for electrical distribution applications.
The device can operate in an ambient temperature range of -35 to 70 °C and at altitudes of up to 2000 m without the additional corrections required for higher elevations.
The Schneider Electric A9F74204 is a compact solution for protecting 4 A bipolar circuits against overloads and short circuits. Its C curve makes it suitable for many electrical distribution applications with moderate inrush current loads.
The combination of 2 protected poles, 4 A, C curve, 6 kA breaking capacity, VisiTrip, VisiSafe, and Acti9 auxiliary compatibility provides a flexible solution for residential, commercial, tertiary, and professional electrical panels.