

The Schneider Electric Acti9 iC60N A9F79325 miniature circuit breaker is a three-pole automatic circuit breaker rated at 25 A with C curve, designed to protect electrical circuits against overloads and short circuits. It features 3 poles with all 3 poles protected, thermal-magnetic tripping technology, and is suitable for use in both AC networks and certain DC applications.
Reference A9F79325 offers a rated breaking capacity Icn of 6 kA at 400 V AC according to IEC/EN 60898-1 and an ultimate breaking capacity Icu of 10 kA at 380-415 V AC according to IEC/EN 60947-2. It belongs to Schneider Electric's professional Acti9 iC60N range and is designed for modular DIN rail mounting in residential, commercial, and industrial electrical panels.
The Schneider Electric A9F79325 has a 3P configuration, with thermal and magnetic protection on all three poles. Its rated current is 25 A and it uses a C tripping curve, one of the most common in electrical distribution circuits.
The C curve allows moderate inrush currents before magnetic tripping occurs, so it can be used in many circuits with resistive, inductive, or mixed loads, provided the installation is properly designed and sized.
The Acti9 iC60N integrates two complementary protection mechanisms. Thermal protection acts when an overload persists for a certain period of time and could cause excessive heating of the conductors.
Magnetic protection, on the other hand, provides rapid operation against very high currents caused by a short circuit. This combination protects both electrical lines and connected loads against the main risks associated with overcurrents.
The breaking capacity of reference A9F79325 must be interpreted according to the standard under which it is declared. Schneider Electric specifies an Icn of 6,000 A at 400 V AC according to IEC/EN 60898-1 and an Icu of 10 kA at 380-415 V AC according to IEC/EN 60947-2.
According to IEC/EN 60947-2, its breaking capacity depends on the operating voltage:
Therefore, the commercial designation of 10 kA corresponds to its breaking capacity according to IEC/EN 60947-2 at 380-415 V, while according to IEC/EN 60898-1 the rated value is 6 kA at 400 V AC.
The C curve is especially common in distribution installations because it offers a balance between sensitivity to short circuits and tolerance to transient inrush currents.
The miniature circuit breaker should be selected taking into account the design current, conductor cross-section and length, circuit impedance, expected short-circuit current, and the characteristics of the connected loads.
The Acti9 iC60 range incorporates VisiTrip technology, designed to make it easier to identify the breaker that has tripped due to an electrical fault. This indication allows faster location of the affected circuit within panels containing numerous protections.
Quick trip identification helps simplify installation diagnostics and maintenance operations.
VisiSafe technology makes it easier to visually check the open state of the breaker, improving identification of the circuit status during maintenance operations.
The Schneider Electric A9F79325 is also suitable for isolation according to IEC/EN 60898-1 and IEC/EN 60947-2, allowing it to be used to isolate the circuit within the conditions established by the manufacturer.
The Acti9 iC60N offers insulation characteristics suitable for professional electrical panels. Its rated insulation voltage Ui is 500 V and it withstands impulse voltages of up to 6 kV.
The Schneider Electric Acti9 iC60N can be complemented with compatible auxiliary devices, allowing the signaling, tripping, and monitoring functions of the electrical panel to be expanded.
When the installation requires protection against residual differential currents, it can be combined with a compatible separate residual current block. Reference A9F79325 on its own provides thermal-magnetic protection and does not include residual current protection.
The A9F79325 is designed for fixed DIN rail mounting, making it easy to integrate into modular panels. Its three-pole format occupies 3 modules, equivalent to 54 mm in width.
The breaker terminals allow connection of rigid and flexible conductors with suitable cross-sections for 25 A distribution circuits.
The final conductor cross-section must be calculated according to the expected current, installation method, line length, ambient temperature, voltage drop, and applicable regulations.
The miniature circuit breaker has an IP20 protection rating and is intended to be installed inside a suitable electrical enclosure or panel.
The power loss indicated for the Schneider Electric A9F79325 is approximately 3 W. This data may be relevant when calculating the total thermal dissipation of electrical panels with a large number of installed devices.
The Acti9 iC60N miniature circuit breaker is developed in accordance with IEC/EN 60898-1 and IEC/EN 60947-2. These standards define, among other aspects, operating characteristics, breaking capacities, behavior under overcurrents, and insulation requirements for the automatic circuit breaker.
The Schneider Electric Acti9 iC60N A9F79325 3-pole, 25 A, C-curve miniature circuit breaker offers a professional solution for protecting electrical circuits against overloads and short circuits. Its 6 kA breaking capacity according to IEC/EN 60898-1 and 10 kA at 380-415 V according to IEC/EN 60947-2, together with its modular format, VisiTrip and VisiSafe technologies, and the possibility of adding auxiliaries and residual current protection, make it suitable for electrical panels with high safety and protection requirements.