

The Schneider Electric Acti9 iC60N A9F79340 miniature circuit breaker is a modular circuit breaker designed to protect electrical circuits against overloads and short circuits. It features 3 protected poles, a rated current of 40 A, and C tripping curve, providing a robust solution for three-phase circuits in residential, commercial, and professional electrical panels.
This circuit breaker uses thermal-magnetic tripping technology and offers a rated breaking capacity of 6000 A at 400 V AC according to IEC/EN 60898-1. In accordance with IEC/EN 60947-2, its Icu breaking capacity reaches 10 kA at 380-415 V AC, making it suitable for installations with higher protection requirements.
The A9F79340 reference has a 3P configuration, with thermal and magnetic protection on all three poles. When an overload or short circuit occurs, the mechanism simultaneously opens the three phases to isolate the affected circuit.
The C curve is widely used in distribution circuits supplying loads with moderate inrush currents. It can withstand certain transient peaks during load startup without compromising fast tripping in the event of high short-circuit currents.
Thanks to its characteristics, this miniature circuit breaker is suitable for many electrical distribution applications in buildings, shops, offices, tertiary installations, and other properly sized three-phase electrical panels.
The Acti9 iC60N combines two protection principles in a single device:
This combination helps protect downstream conductors and loads against the main overcurrent situations.
Schneider Electric specifies a rated breaking capacity Icn of 6000 A at 400 V AC for the A9F79340 in accordance with IEC/EN 60898-1.
When classified according to IEC/EN 60947-2, the breaking capacity depends on the network voltage:
Therefore, for a typical 400 V three-phase network, this reference offers 6 kA according to IEC/EN 60898-1 and 10 kA according to IEC/EN 60947-2.
As part of the Acti9 iC60 range, the device incorporates VisiTrip technology, which provides a front mechanical indication when the breaker has tripped due to an electrical fault.
This signaling makes it easier to identify the affected circuit within panels with multiple protective devices and helps reduce diagnosis and maintenance times.
The VisiSafe technology allows visual verification of the physical opening of the contacts through a green indicator. Schneider Electric also specifies that the A9F79340 is suitable for isolation according to IEC/EN 60898-1 and IEC/EN 60947-2.
These features provide an additional safety reference before carrying out work on the downstream circuit.
The Acti9 iC60N has energy limiting class 3. This feature helps reduce the energy passing through the circuit during a short circuit, lowering the thermal and electrodynamic stress on the protected conductors and equipment.
The Schneider Electric A9F79340 can be used in alternating current as well as certain direct current applications, always within the electrical values specified by the manufacturer.
The miniature circuit breaker is designed for fixed installation on DIN rail. It occupies three standard 18 mm modules, making it easy to integrate alongside residual current devices, contactors, surge protection devices, and other modular Acti9 devices.
The A9F79340 has terminals designed for copper conductors of different cross-sections, adapting to the usual wiring of three-phase distribution circuits.
Power supply can be connected from the top or bottom of the miniature circuit breaker, offering flexibility during panel assembly and wiring.
The modular Acti9 architecture allows the iC60N to be complemented with signaling auxiliaries, remote tripping devices, and compatible residual current blocks. This makes it possible to create more complete protection solutions without changing the switchgear platform.
The device does not include integrated residual current protection. When the installation requires protection against residual currents, it must be combined with a compatible residual current block or the corresponding residual current device must be installed.
The breaker has an IP20 protection rating according to IEC 60529 and is designed to be installed inside a suitable enclosure or panel.
The Acti9 iC60 range is designed to offer high mechanical and electrical durability in professional applications, maintaining performance across a wide temperature range.
The Schneider Electric A9F79340 provides a complete solution for protecting 40 A three-phase lines against overloads and short circuits. Its C curve makes it suitable for many distribution circuits with general-purpose loads and moderate inrush currents.
The combination of 3 protected poles, 40 A, C curve, 6 kA according to IEC/EN 60898-1, 10 kA at 380-415 V according to IEC/EN 60947-2, VisiTrip, and VisiSafe makes it an especially suitable choice for residential, commercial, tertiary, and professional electrical panels.