

The Schneider Electric Acti9 iK60N A9K24263 thermal-magnetic circuit breaker is a bipolar automatic switch rated at 63 A with C curve, designed to protect electrical circuits against overloads and short circuits. It features 2 protected poles, thermal-magnetic tripping technology, and a rated breaking capacity of 6 kA in accordance with EN/IEC 60898-1, offering a practical solution for residential and commercial distribution boards.
The Schneider Electric Acti9 iK60 range is designed to simplify both circuit protection and isolation. The A9K24263 reference can be mounted on DIN rail and supports power supply from either the top or the bottom, making it easy to integrate into different panel configurations.
The Schneider Electric A9K24263 features 2 poles with both poles protected and a rated current of 63 A at 30 °C. Its C tripping curve has a magnetic operating threshold between 5 and 10 times the rated current, a common characteristic for circuits with moderate inrush currents.
The automatic circuit breaker combines two protection systems. The thermal trip acts against sustained overloads that can cause excessive heating of the conductors, while the magnetic trip provides a fast response when a short circuit occurs.
This combination makes the iK60N suitable as a protection device for lines and electrical circuits within low-voltage distribution boards.
The Acti9 iK60N A9K24263 offers a rated breaking capacity Icn of 6,000 A in accordance with EN/IEC 60898-1. The manufacturer specifies this capacity at both 230 V and 400 V AC, 50/60 Hz.
Its service breaking capacity Ics also reaches 6 kA, equivalent to 100% of the rated breaking capacity, under the conditions established by EN/IEC 60898-1.
In addition to its protection functions, the Schneider Electric A9K24263 is suitable for isolation in accordance with EN/IEC 60898-1. This means it can be used to electrically isolate the protected circuit when maintenance or intervention work is required, always following the corresponding safety procedures.
The thermal-magnetic breaker is installed by clip-on mounting on a DIN rail, making it easy to fit inside modular electrical panels. Schneider Electric incorporates a double clip system that allows the device to be removed even when installed next to a compatible comb busbar.
The unit also allows top or bottom power supply, providing greater flexibility during panel wiring.
The A9K24263 occupies 4 x 9 mm modules, equivalent to a width of 36 mm or 2 standard 18 mm modules. Its dimensions make it easy to integrate alongside other modular protection and control devices.
The thermal-magnetic breaker has a rated insulation voltage Ui of 440 V AC and an impulse withstand voltage Uimp of 4 kV, features that help ensure proper insulation within low-voltage installations.
The terminals of the Schneider Electric A9K24263 allow connection of conductors with different cross-sections depending on their construction. It accepts up to 35 mm² for rigid conductors and up to 25 mm² for flexible conductors, making it suitable for circuits designed for high currents.
The Acti9 iK60N is designed to provide a long service life inside the electrical panel. The A9K24263 reference offers mechanical durability of up to 20,000 cycles and electrical durability of up to 10,000 cycles under the conditions specified by the manufacturer.
The automatic circuit breaker offers an IP20 protection rating when installed as a standalone device. Once mounted inside a suitable modular enclosure, it can achieve a protection rating of IP40, according to IEC/EN 60529.
The operating ambient temperature range is -25 to 60 °C, while the permitted storage temperature ranges from -40 to 85 °C.
The Schneider Electric Acti9 iK60N A9K24263 thermal-magnetic circuit breaker is developed in accordance with EN/IEC 60898-1 for circuit breakers intended for overcurrent protection in electrical installations.
The Schneider Electric Acti9 iK60N A9K24263 2-pole, 63 A, C-curve provides protection against overloads and short circuits in electrical distribution circuits. Its 6 kA breaking capacity, modular DIN rail format, top or bottom supply option, and high durability make it a suitable solution for residential and tertiary electrical panels.