IK60N Circuit Breaker 3P 10A Curve C with reference A9K17310 from the brand SCHNEIDER ELECTRIC
IK60N Circuit Breaker 3P 10A Curve C with reference A9K17310 from the brand SCHNEIDER ELECTRIC
SCHNEIDER ELECTRIC

IK60N Circuit Breaker 3P 10A Curve C

REF
A9K17310
(0)
43.10 €
€43.10
€191.27
Up to -6% for professionals. Discover it.
Schneider Electric Acti9 iK60N 3P 10 A circuit breaker, C curve and 6 kA breaking capacity. Protects three-phase circuits against overloads and short circuits with safety.
Buy now and receive it between 20 and November 23
Express delivery
Get +44 +87 Sumis for the purchase
Receive 2x Sumis for a limited time
More about the product

Information about IK60N Circuit Breaker 3P 10A Curve C

The Schneider Electric Acti9 iK60N A9K17310 is a three-pole thermal-magnetic miniature circuit breaker designed to protect electrical circuits against overloads and short circuits. It features 3 protected poles, a rated current of 10 A, C tripping curve and a breaking capacity of 6 kA, making it a suitable solution for residential and commercial electrical installations.

This MCB belongs to the Schneider Electric Acti9 iK60N range and uses thermal-magnetic tripping technology. The thermal protection acts against prolonged overloads, while the magnetic protection provides a fast response to high currents caused by a short circuit.

10 A three-phase MCB with C curve

The A9K17310 has a 3P configuration, allowing it to protect the three phase conductors of a three-phase circuit simultaneously. Its 10 A rated current makes it suitable for lines whose cross-section and loads have been sized for this rating.

The C tripping curve is widely used in general-purpose electrical distribution installations, where loads with moderate inrush currents may be present. This makes the Acti9 iK60N a versatile option for electrical panels in homes, shops, offices and other commercial installations.

6000 A breaking capacity

The Schneider Electric A9K17310 circuit breaker offers a rated breaking capacity of 6000 A at 230 V AC in accordance with EN/IEC 60898-1. This capacity allows the device to safely interrupt short-circuit currents of up to 6 kA within the conditions defined by the standard.

The iK60N range is designed for an operating voltage of 230/400 V AC and a mains frequency of 50/60 Hz, adapting to common low-voltage distribution networks.

Modular DIN rail installation

The MCB is installed by clip-on mounting on a DIN rail, making it easy to integrate into modular electrical panels. It incorporates a double clip system that allows the device to be removed even when a comb busbar is installed, simplifying maintenance and replacement operations.

Its width is 54 mm, equivalent to three 18 mm modules. Its approximate dimensions are 85 mm high, 54 mm wide and 78.5 mm deep.

Electrical connection

The Acti9 iK60N features box terminals for copper conductors and allows different cross-sections depending on the cable type used:

  • Rigid conductors: up to 25 mm².
  • Flexible conductors: up to 16 mm².

This connection capacity makes it easy to integrate into new installations and electrical panel renovation work.

Technical features of the Schneider A9K17310

  • Brand: Schneider Electric.
  • Reference: A9K17310.
  • Range: Acti9 iK60N.
  • Product type: miniature thermal-magnetic circuit breaker.
  • Number of poles: 3P.
  • Protected poles: 3.
  • Rated current: 10 A.
  • Tripping curve: C.
  • Tripping technology: thermal-magnetic.
  • Network type: AC.
  • Operating voltage: 230/400 V AC.
  • Frequency: 50/60 Hz.
  • Breaking capacity Icn: 6000 A at 230 V AC according to EN/IEC 60898-1.
  • Rated insulation voltage Ui: 440 V AC.
  • Impulse withstand voltage Uimp: 4 kV.
  • Degree of protection: IP20.
  • Mounting: DIN rail clip-on.
  • Width: 54 mm.
  • Height: 85 mm.
  • Depth: 78.5 mm.
  • Maximum rigid conductor cross-section: 25 mm².
  • Maximum flexible conductor cross-section: 16 mm².
  • Electrical durability: up to 10,000 cycles.
  • Mechanical durability: up to 20,000 cycles.
  • Standard: EN/IEC 60898-1.

Protection for residential and commercial electrical panels

The Schneider Electric A9K17310 10 A MCB combines overload and short-circuit protection in a compact modular device. Its three-pole configuration allows it to protect three-phase lines, while the C curve provides suitable performance for many general-purpose electrical distribution applications.

Thanks to its DIN rail mounting, 6 kA breaking capacity and the reliability of the Acti9 range, it is a practical solution for circuit protection in residential, commercial and tertiary electrical panels.

Specifications
Manufacturer
SCHNEIDER ELECTRIC
Reference
A9K17310
SKU
SCHEDD93132
Object
Magnetic circuit breaker
Number of poles
Assembly
Adjustable in clip
Nominal current
10 A
Network type
CA
Protection rating
IP20
Frequency
50.00 - 60.00 Hz
Datasheets
Reviews
Returns within 30 days
Shop with peace of mind. If something goes wrong, we'll take care of it.
After-sales service
Any questions? Our support team will be happy to help you.
Pay how and when you want
Card, bank transfer, PayPal... Installment? We have them all.
GroupSumi is your online distributor for construction, electrical material and climate control.
All rights reserved © 2026 GroupSumi