Contactor 12A 1 NO/1 NC 400V 50-60HZ with reference LC1D12V7 from the brand SCHNEIDER ELECTRIC
Contactor 12A 1 NO/1 NC 400V 50-60HZ with reference LC1D12V7 from the brand SCHNEIDER ELECTRIC
SCHNEIDER ELECTRIC

Contactor 12A 1 NO/1 NC 400V 50-60HZ

REF
LC1D12V7
(0)
59.40 €
€59.40
€130.68
Up to -6% for professionals. Discover it.
Schneider Electric TeSys Deca 3P 12A AC-3 contactor, 400V AC 50/60Hz coil, 3 normally open power contacts and auxiliary 1 NO + 1 NC, for motors up to 5.5 kW at 400V.
Buy now and receive it between 3 and December 7
Get +60 +119 Sumis for the purchase
Receive 2x Sumis for a limited time
More about the product

Information about Contactor 12A 1 NO/1 NC 400V 50-60HZ

The Schneider Electric TeSys Deca LC1D12V7 contactor is a three-pole contactor designed for controlling electric motors and resistive loads in automation panels, machinery, and industrial installations. It features 3 normally open main contacts, a rated current of 12 A in AC-3 and AC-3e categories up to 440 V, and a 400 V AC control coil at 50/60 Hz. It also includes as standard 1 NO auxiliary contact + 1 NC auxiliary contact.

In three-phase 380-400 V networks, it can control motors up to 5.5 kW in AC-3/AC-3e category. Its compact design, DIN rail or panel mounting, high mechanical durability, and compatibility with TeSys accessories make it ideal for pumps, fans, compressors, HVAC systems, machinery, and control panels.

Main features of the Schneider Electric LC1D12V7

  • Brand: Schneider Electric.
  • Range: TeSys Deca.
  • Reference: LC1D12V7.
  • Type: power contactor.
  • Application: motor and resistive load control.
  • Number of poles: 3P.
  • Main contacts: 3 NO.
  • Integrated auxiliary contacts: 1 NO + 1 NC.
  • Rated current AC-3/AC-3e: 12 A up to 440 V.
  • Rated current AC-1: 25 A up to 440 V.
  • Coil voltage: 400 V AC.
  • Coil frequency: 50/60 Hz.
  • Motor power at 380-400 V: 5.5 kW.
  • Maximum power circuit voltage: 690 V AC.
  • Mounting: DIN rail or panel.
  • Connection: screw terminals.
  • Front protection rating: IP20.
  • Dimensions: 45 x 77 x 86 mm.
  • Weight: approximately 0.325 kg.

Three-pole 12 A contactor

The LC1D12V7 has three normally open power poles. When the coil is energized, the three main contacts close simultaneously to supply the connected motor or load.

Schneider Electric specifies a rated current of 12 A in AC-3 and AC-3e up to 440 V, categories mainly intended for controlling squirrel-cage motors.

Up to 5.5 kW motor at 400 V

The maximum motor power depends on the supply voltage. Schneider Electric specifies for this contactor:

  • 220-230 V AC: 3 kW in AC-3/AC-3e.
  • 380-400 V AC: 5.5 kW in AC-3/AC-3e.
  • 415-440 V AC: 5.5 kW in AC-3/AC-3e.
  • 500 V AC: 7.5 kW in AC-3/AC-3e.
  • 660-690 V AC: 7.5 kW in AC-3/AC-3e.
  • 400 V AC in AC-4: 3.7 kW.

In a typical 400 V three-phase network, this reference is therefore suitable for motors up to 5.5 kW, provided the actual current and duty cycle are compatible.

400 V AC 50/60 Hz coil

The V7 suffix identifies this version with a 400 V AC control coil compatible with 50 and 60 Hz. When the coil is energized, the contactor closes; when the control voltage is removed, the contacts return to their rest position.

The coil does not include an integrated suppression module, although the contactor accepts compatible TeSys accessories when the application requires limiting overvoltages generated during switching off.

1 NO + 1 NC integrated auxiliaries

In addition to the three main power contacts, the LC1D12V7 includes:

  • 1 normally open auxiliary contact.
  • 1 normally closed auxiliary contact.

These contacts can be used for self-holding, signaling, interlocking, feedback to PLCs, or controlling other circuit elements.

The NO and NC auxiliary contacts are mechanically linked in accordance with IEC 60947-5-1, and the NC contact has a mirror contact function in accordance with IEC 60947-4-1.

12 A in AC-3 and 25 A in AC-1

The contactor capacity varies depending on the type of load:

  • AC-3 / AC-3e: 12 A up to 440 V.
  • AC-1: 25 A up to 440 V.

The 12 A rating is mainly for motor control, while the 25 A AC-1 rating applies to non-inductive or slightly inductive loads. Selection should always be made according to the actual utilization category.

Power voltage up to 690 V AC

The main circuit can be used with a rated operational voltage of up to 690 V AC, between 25 and 400 Hz. Schneider Electric also covers certain DC applications up to 300 V.

The rated insulation voltage is 690 V according to IEC 60947 and the impulse withstand voltage Uimp is 6 kV. The device belongs to overvoltage category III.

Conventional thermal current

Schneider Electric specifies the following conventional free-air thermal currents at 60 °C:

  • Power circuit: 25 A.
  • Signaling circuit: 10 A.

Making and breaking capacity

The main circuit has a rated making capacity of 250 A at 440 V in accordance with IEC 60947.

The rated breaking capacity also reaches 250 A at 440 V.

Short-time current withstand

For the power circuit, Schneider Electric specifies:

  • 210 A for 1 second.
  • 105 A for 10 seconds.
  • 61 A for 1 minute.
  • 30 A for 10 minutes.

These ratings do not replace short-circuit protection devices, which must be coordinated with the contactor.

Fuse coordination

Schneider Electric specifies the following coordination references:

  • 25 A gG: type 2 coordination up to 690 V.
  • 40 A gG: type 1 coordination up to 690 V.
  • 10 A gG: signaling circuit protection.

Final protection must be selected taking into account the motor, starting scheme, and Schneider Electric coordination tables.

High durability

The LC1D12V7 is designed for applications with a high number of switching operations:

  • Mechanical durability: up to 15 million cycles.
  • Electrical durability in AC-3 at 12 A: up to 2 million cycles.
  • Electrical durability in AC-3e at 12 A: up to 2 million cycles.
  • Electrical durability in AC-1 at 25 A: approximately 800,000 cycles.
  • Maximum switching frequency: up to 3600 cycles/h at 60 °C.

Coil consumption

The coil has a high consumption only during pull-in and a considerably lower consumption during holding:

  • Inrush power: approximately 70 VA at 50/60 Hz.
  • Holding consumption at 50 Hz: approximately 7 VA.
  • Holding consumption at 60 Hz: approximately 7.5 VA.
  • Thermal dissipation: approximately 2-3 W.

Operating times

  • Closing time: 12-22 ms.
  • Opening time: 4-19 ms.

These short times allow the contactor to be integrated into automation and switching panels with fast response.

DIN rail or panel mounting

The Schneider Electric LC1D12V7 can be installed on a DIN rail or mounted on a panel, offering flexibility for distribution boards, control panels, and machinery.

Screw terminal connection

The LC1D12V7 reference uses screw terminals for both power and control.

Schneider Electric allows, depending on the number and type of conductor:

  • Rigid conductors: 1 to 4 mm².
  • Flexible conductors without ferrule: 1 to 4 mm².
  • Flexible conductors with ferrule: 1 to 4 mm² for one conductor.
  • Two flexible conductors with ferrule: up to 2.5 mm² each.
  • Tightening torque: 1.7 Nm.

Compact design

The contactor has reduced dimensions that make installation easier in space-limited panels:

  • Width: 45 mm.
  • Height: 77 mm.
  • Depth: 86 mm.
  • Weight: approximately 0.325 kg.

IP20 protection rating

The front of the contactor offers an IP20 protection rating in accordance with IEC 60529. It must be installed inside a suitable enclosure or cabinet to achieve the protection level required by the application.

Compatibility with TeSys accessories

The LC1D12V7 can be combined with TeSys range accessories to create complete control and protection solutions, including:

  • Thermal overload relays for motor protection.
  • Additional auxiliary blocks.
  • Time-delay contacts.
  • Coil suppression modules.
  • Mechanical interlocks.
  • Reversing accessories.
  • Connection and mounting accessories.

Applications of the Schneider Electric LC1D12V7

Thanks to its 12 A rating and 400 V AC coil, this contactor can be used in applications such as:

  • Water pumps.
  • Fans and extractors.
  • Compressors.
  • HVAC and air conditioning systems.
  • Industrial machinery.
  • Conveyor belts.
  • Automation panels.
  • Direct starting of three-phase motors.
  • Compatible resistive loads.
  • Systems controlled by PLCs, relays, or automation devices.

Applicable standards

The TeSys Deca LC1D12V7 is designed in accordance with international standards for contactors and control devices, including:

  • IEC 60947-4-1.
  • IEC 60947-5-1.
  • EN 60947-4-1.
  • EN 60947-5-1.
  • UL.
  • CSA.

Technical data of the Schneider Electric LC1D12V7

  • Manufacturer: Schneider Electric.
  • Reference: LC1D12V7.
  • Range: TeSys Deca.
  • Type: power contactor.
  • Application: motor and resistive load control.
  • Poles: 3P.
  • Power contacts: 3 NO.
  • Auxiliary contacts: 1 NO + 1 NC.
  • AC-3/AC-3e current: 12 A up to 440 V.
  • AC-1 current: 25 A up to 440 V.
  • Coil: 400 V AC, 50/60 Hz.
  • Motor at 220-230 V: 3 kW.
  • Motor at 380-400 V: 5.5 kW.
  • Motor at 415-440 V: 5.5 kW.
  • Motor at 500 V: 7.5 kW.
  • Motor at 660-690 V: 7.5 kW.
  • Motor at 400 V in AC-4: 3.7 kW.
  • Maximum AC Ue: 690 V.
  • Maximum DC Ue: 300 V.
  • Ui: 690 V.
  • Uimp: 6 kV.
  • Ith power circuit: 25 A.
  • Ith auxiliary circuit: 10 A.
  • Making capacity: 250 A at 440 V.
  • Breaking capacity: 250 A at 440 V.
  • Mechanical durability: 15 million cycles.
  • Electrical durability AC-3: 2 million cycles.
  • Maximum frequency: 3600 cycles/h.
  • Coil inrush power: 70 VA.
  • Holding consumption: 7 VA at 50 Hz / 7.5 VA at 60 Hz.
  • Closing time: 12-22 ms.
  • Opening time: 4-19 ms.
  • Mounting: DIN rail or panel.
  • Connections: screw terminals.
  • Width: 45 mm.
  • Height: 77 mm.
  • Depth: 86 mm.
  • Weight: approximately 0.325 kg.
  • Front protection rating: IP20.

12 A TeSys Deca contactor with 400 V coil

The Schneider Electric LC1D12V7 combines a rated current of 12 A in AC-3/AC-3e, motor capacity up to 5.5 kW at 400 V, and a 400 V AC control coil at 50/60 Hz. The three NO main contacts switch the power circuit, while the 1 NO + 1 NC auxiliaries enable signaling, interlocking, and automation functions.

Its compact 45 mm width, DIN rail or panel mounting, up to 15 million mechanical cycles, and compatibility with TeSys accessories make this reference a versatile solution for machinery, pumps, fans, compressors, and industrial control panels.

Specifications
Manufacturer
SCHNEIDER ELECTRIC
Reference
LC1D12V7
SKU
SCH710A72E6
Object
Contactor
Number of poles
3 NA
Assembly
Plate. Profile
Warranty
18 months
Compliance with RoHS
YES
Number of contacts
1 NA + 1 NC A
Operating temperature
-20.00 - 60.00 °C
Datasheets
Reviews
Returns within 30 days
Shop with peace of mind. If something goes wrong, we'll take care of it.
After-sales service
Any questions? Our support team will be happy to help you.
Pay how and when you want
Card, bank transfer, PayPal... Installment? We have them all.
GroupSumi is your online distributor for construction, electrical material and climate control.
All rights reserved © 2026 GroupSumi