

The Schneider Electric LC1D18F7 contactor from the TeSys D / TeSys Deca range is a three-pole contactor designed for motor control and resistive loads in electrical panels and automation systems. It features a rated operational current of 18 A in AC-3 up to 440 V, a control coil of 110 V AC at 50/60 Hz, three normally open main contacts, and 1 NO auxiliary contact + 1 NC auxiliary contact integrated.
In motor control applications, it can switch three-phase motors up to 7.5 kW at 380-400 V. Its compact 45 mm width, DIN rail or panel mounting, and compatibility with TeSys family accessories make it easy to integrate into control panels for pumps, fans, machinery, HVAC, and industrial automation.
The LC1D18F7 is primarily designed for the control of electric motors and resistive loads. In AC-3 utilization category, it supports a rated current of 18 A up to 440 V AC, allowing the usual switching operations for squirrel-cage motors within the conditions specified by Schneider Electric.
AC-3 category covers contactor closing with the motor starting current and opening when the motor is running normally. For this reason, it is one of the most common utilization categories for pumps, fans, compressors, and other electrical drives.
Schneider Electric specifies different motor power ratings depending on the supply voltage used:
For a typical 400 V three-phase installation, this reference is therefore rated for motors up to 7.5 kW in AC-3 category, provided the motor’s actual electrical characteristics are compatible.
The F7 version includes an electromagnetic coil with a nominal control voltage of 110 V AC at 50/60 Hz. This allows the contactor to be used in control circuits operating at this voltage, which is common in certain industrial panels and automation systems.
When voltage is applied to the coil, the contactor closes the three main contacts and simultaneously switches its auxiliary contacts. When the control signal is removed, the mechanism returns to its rest position.
The power circuit includes 3 normally open main contacts, suitable for switching the three phases of a three-phase load.
The commercial description “1 NO/1 NC” refers to the auxiliary contacts included as standard with the contactor. The main power contacts are three NO contacts, one for each pole.
The LC1D18F7 comes factory-fitted with one normally open auxiliary contact and one normally closed auxiliary contact. These contacts can be used in control circuits for functions such as:
Schneider Electric specifies that both auxiliary contacts are mechanically linked according to IEC 60947-5-1. The NC contact also features mirror contact function according to IEC 60947-4-1.
The permissible current depends on the utilization category and therefore on the type of load connected:
AC-3 is mainly intended for motor control, while AC-1 applies to non-inductive or slightly inductive loads, such as certain electric heaters.
For this reason, contactor selection must be based on both current and the load utilization category.
Schneider Electric specifies a rated operational voltage for the power circuit of up to 690 V AC between 25 and 400 Hz. It also supports DC applications up to 300 V within the configurations defined by the manufacturer.
The rated insulation voltage reaches 690 V according to IEC 60947-4-1, while the impulse withstand voltage is 6 kV and the overvoltage category is III.
The LC1D18F7 has a rated making capacity of 300 A at 440 V for the power circuit in accordance with IEC 60947. The rated breaking capacity specified by Schneider Electric is also 300 A at 440 V.
These performance values allow the contactor to withstand the transient currents associated with motor starting and switching within the device’s intended limits.
The contactor is designed for a high number of operations. Schneider Electric states:
These values correspond to Schneider Electric test conditions and make the device suitable for repetitive switching applications.
The electromagnetic coil requires higher power during the initial pull-in and lower consumption once the contactor remains energized.
These values should be considered when sizing control transformers, relays, or other elements supplying the coil.
The technical documentation specifies reduced operating times:
These times allow a quick response to signals from the control circuit.
The Schneider Electric LC1D18F7 offers two mounting options:
This versatility makes installation easier in both compact automation panels and larger industrial electrical enclosures.
The contactor has reduced dimensions that help optimize available panel space:
Its width of only 45 mm makes it easy to install several contactors and control components on the same rail or mounting plate.
The LC1D18F7 uses screw terminals for both the power circuit and the control circuit.
In the power circuit, the technical documentation allows rigid or flexible conductors with cross-sections of up to 6 mm², depending on the number of conductors and the type of termination.
The tightening torque specified by Schneider Electric for the main and control terminals is approximately 1.7 Nm.
The contactor has a front protection rating of IP20 in accordance with IEC 60529. It is intended for installation inside panels or enclosures that provide the additional protection required against dust, moisture, and accidental contact.
The reference also includes a protective cover over its internal elements.
Schneider Electric specifies the following environmental conditions:
The contactor can be integrated with different Schneider Electric TeSys accessories to build complete protection, control, and automation solutions.
Available accessories for compatible configurations include:
This contactor can be used in many automation and control applications:
Schneider Electric specifies this contactor in accordance with different international standards applicable to switching and control devices:
The reference also has different international certifications depending on market and application.
The Schneider Electric LC1D18F7 combines a rated current of 18 A in AC-3, motor capacity up to 7.5 kW at 400 V, and a 110 V AC 50/60 Hz coil in a compact format designed for professional panels.
Its three normally open main contacts and integrated 1 NO + 1 NC auxiliary contacts allow both power switching and common interlocking and signaling functions. DIN rail or panel mounting and compatibility with TeSys accessories make it suitable for motor control panels, pumps, fans, HVAC equipment, and machinery.
Contactor selection should be made taking into account the actual load power and current, supply voltage, utilization category, and the operating conditions of the installation.