Contactor 18A 1 NO/1 NC 24V BC-AR with reference LC1D18BL from the brand SCHNEIDER ELECTRIC
Contactor 18A 1 NO/1 NC 24V BC-AR with reference LC1D18BL from the brand SCHNEIDER ELECTRIC
SCHNEIDER ELECTRIC

Contactor 18A 1 NO/1 NC 24V BC-AR

REF
LC1D18BL
(0)
91.80 €
€91.80
€235.40
Up to -4% for professionals. Discover it.
Schneider Electric TeSys D 18A AC-3 contactor, 3P with 3 NO, low-consumption 24V DC coil and 1 NO + 1 NC auxiliary, for three-phase motors up to 7.5 kW at 400V, with integrated suppressor.
Buy now and receive it between 20 and November 23
Express delivery
Get +92 +184 Sumis for the purchase
Receive 2x Sumis for a limited time
More about the product

Information about Contactor 18A 1 NO/1 NC 24V BC-AR

The Schneider Electric TeSys D LC1D18BL contactor is a three-pole electromechanical contactor designed for motor control and resistive loads in electrical panels, machinery, and automation systems. It features 3 normally open main contacts (3 NO), a rated operational current of 18 A in AC-3 category up to 440 V, and a low-consumption 24 V DC control coil.

The LC1D18BL reference also includes 1 NO auxiliary contact + 1 NC auxiliary contact and an integrated bidirectional surge suppressor in the coil, reducing overvoltages generated when the control circuit is switched off. For three-phase motors, it offers power up to 7.5 kW at 380-400 V AC.

18 A TeSys D three-pole contactor

The Schneider Electric LC1D18BL is mainly intended for motor control and resistive loads. Its main circuit has three normally open poles that switch together when the coil is energized.

  • Number of poles: 3P.
  • Main contacts: 3 NO.
  • AC-3 rated current: 18 A up to 440 V AC.
  • AC-1 rated current: 32 A up to 440 V AC.
  • Applications: motor control and resistive loads.
  • Utilization categories: AC-1, AC-3 and AC-4.

Low-consumption 24 V DC coil

One of the main features of the LC1D18BL reference is its low-consumption 24 V DC coil. This configuration is especially suitable for control circuits powered from 24 V DC supplies, PLCs, interface relays, and automation systems.

  • Control voltage Uc: 24 V DC.
  • Control circuit type: low-consumption DC.
  • Inrush power: 2.4 W at 20 °C.
  • Holding power: 2.4 W at 20 °C.
  • Time constant: 40 ms.

Integrated surge suppressor

The coil incorporates a bidirectional peak-limiting suppressor. This element helps limit transient overvoltages generated when the coil is de-energized, reducing disturbances that could affect other components in the control circuit.

This feature explains the common commercial designation of suppressed low-consumption coil associated with this reference.

1 NO + 1 NC auxiliary contacts

In addition to the three main power contacts, the contactor includes from the factory one normally open auxiliary contact and one normally closed auxiliary contact.

These contacts can be used for self-holding, signaling, interlocking, status feedback, or communication with automation systems.

  • Auxiliary contacts: 1 NO + 1 NC.
  • Mechanically linked contacts: according to IEC 60947-5-1.
  • Mirror NC contact: according to IEC 60947-4-1.
  • Minimum switching current: 5 mA.
  • Minimum switching voltage: 17 V.

Up to 7.5 kW at 400 V

In AC-3 category, intended for standard squirrel-cage motor control, Schneider Electric specifies different maximum power ratings depending on the supply voltage:

  • 4 kW at 220-230 V AC.
  • 7.5 kW at 380-400 V AC.
  • 9 kW at 415-440 V AC.
  • 10 kW at 500 V AC.
  • 10 kW at 660-690 V AC.

In AC-4 category, for more demanding switching applications, Schneider Electric specifies 4 kW at 400 V AC.

Power circuit up to 690 V AC

The main circuit supports a rated operational voltage of up to 690 V AC between 25 and 400 Hz. It also supports DC operation up to 300 V DC within the conditions indicated by Schneider Electric.

  • Operational voltage in AC: up to 690 V.
  • Power circuit frequency: 25-400 Hz.
  • Operational voltage in DC: up to 300 V.
  • Insulation voltage Ui: 690 V according to IEC 60947.
  • Impulse withstand voltage Uimp: 6 kV.
  • Overvoltage category: III.

Making and breaking capacity

The LC1D18BL has a rated making capacity of 300 A at 440 V in the power circuit according to IEC 60947. Its rated breaking capacity is also 300 A at 440 V.

For type 2 coordination, Schneider Electric indicates an associated 35 A gG fuse up to 690 V. For type 1 coordination, the indicated value is 50 A gG.

High mechanical and electrical durability

The contactor is designed for applications with a high number of operations and achieves a mechanical durability of up to 30 million cycles.

  • Mechanical durability: 30 million cycles.
  • Electrical durability AC-3 at 18 A: 1.65 million cycles.
  • Electrical durability AC-1 at 32 A: 1 million cycles.
  • Maximum switching frequency: 3,600 cycles/h at temperatures up to 60 °C.

Opening and closing times

The low-consumption coil has operating times suited to automation and control systems:

  • Closing time: 65.45-88.55 ms.
  • Opening time: 20-30 ms.

DIN rail or panel mounting

The Schneider Electric LC1D18BL offers installation flexibility and can be mounted on either DIN rail or panel. This makes it easy to integrate into automation panels, motor starters, and industrial electrical assemblies.

  • Height: 77 mm.
  • Width: 45 mm.
  • Depth: 95 mm.
  • Weight: approximately 0.49 kg.

Screw terminals

The power circuit and control circuit use screw terminals, compatible with rigid and flexible conductors in different cross-sections.

  • Power conductors: up to 6 mm² depending on type and termination.
  • Control conductors: up to 4 mm² depending on type and termination.
  • Power circuit tightening torque: 1.7 Nm.
  • Control circuit tightening torque: 1.7 Nm.

IP20 front protection

The contactor has an IP20 front protection rating according to IEC 60529 and is designed to be installed inside a suitable enclosure or electrical panel.

  • Front protection: IP20.
  • Operating ambient temperature: -5 to 60 °C.
  • Storage temperature: up to -60 to 80 °C depending on conditions.
  • Operating altitude without temperature derating: up to 3,000 m.
  • Pollution degree: 3.

Standards and certifications

The Schneider Electric LC1D18BL complies with the main international standards applicable to low-voltage contactors and auxiliary circuits.

  • IEC 60947-4-1.
  • IEC 60947-5-1.
  • EN 60947-4-1.
  • EN 60947-5-1.
  • UL 508.
  • CSA C22.2 No. 14.

It also has international certifications such as UL, CSA, CCC, BV, DNV, RINA, and others depending on the market.

Schneider Electric LC1D18BL technical characteristics

  • Brand: Schneider Electric.
  • Range: TeSys.
  • Series: TeSys D / TeSys Deca.
  • Reference: LC1D18BL.
  • Type: electromechanical contactor.
  • Application: motor control and resistive loads.
  • Number of poles: 3P.
  • Main contacts: 3 NO.
  • Auxiliary contacts: 1 NO + 1 NC.
  • AC-3 rated current: 18 A up to 440 V AC.
  • AC-1 rated current: 32 A up to 440 V AC.
  • Power at 220-230 V: 4 kW.
  • Power at 380-400 V: 7.5 kW.
  • Power at 415-440 V: 9 kW.
  • Power at 500 V: 10 kW.
  • Power at 660-690 V: 10 kW.
  • Maximum power circuit voltage: 690 V AC.
  • Coil voltage: 24 V DC.
  • Coil type: low consumption.
  • Integrated suppressor: yes, bidirectional peak suppressor.
  • Inrush consumption: 2.4 W.
  • Holding consumption: 2.4 W.
  • Insulation voltage Ui: 690 V according to IEC.
  • Impulse withstand voltage Uimp: 6 kV.
  • Mechanical durability: 30 million cycles.
  • Electrical durability AC-3: 1.65 million cycles.
  • Maximum switching frequency: 3,600 cycles/h.
  • Closing time: 65.45-88.55 ms.
  • Opening time: 20-30 ms.
  • Terminals: screw terminals.
  • Mounting: DIN rail or panel.
  • Dimensions: 77 x 45 x 95 mm.
  • Weight: approximately 0.49 kg.
  • Front protection: IP20.
  • Operating temperature: -5 to 60 °C.

The Schneider Electric TeSys D LC1D18BL 18 A contactor is a solution especially suited to automation panels operating with 24 V DC control circuits. Its 3 NO main contacts, 1 NO + 1 NC auxiliary contacts, low-consumption coil with integrated suppressor, and capability for three-phase motors up to 7.5 kW at 400 V make it ideal for pumps, fans, compressors, machinery, and HVAC systems.

Specifications
Manufacturer
SCHNEIDER ELECTRIC
Reference
LC1D18BL
SKU
SCH29621A6E
Object
Contactor
Number of poles
3 NA
Assembly
Plate. Profile
Warranty
18 months
Compliance with RoHS
YES
Number of contacts
1 NA + 1 NC A
Operating temperature
-20.00 - 60.00 °C
Datasheets
Reviews
Returns within 30 days
Shop with peace of mind. If something goes wrong, we'll take care of it.
After-sales service
Any questions? Our support team will be happy to help you.
Pay how and when you want
Card, bank transfer, PayPal... Installment? We have them all.
GroupSumi is your online distributor for construction, electrical material and climate control.
All rights reserved © 2026 GroupSumi