Contactor 18A 1 NO/1 NC 400V 50-60HZ with reference LC1D18V7 from the brand SCHNEIDER ELECTRIC
Contactor 18A 1 NO/1 NC 400V 50-60HZ with reference LC1D18V7 from the brand SCHNEIDER ELECTRIC
SCHNEIDER ELECTRIC

Contactor 18A 1 NO/1 NC 400V 50-60HZ

REF
LC1D18V7
(0)
79.00 €
€79.00
€173.77
Up to -6% for professionals. Discover it.
Schneider Electric Acti9 iC60L 4P 10A C-curve miniature circuit breaker, with 15 kA breaking capacity at 400 V, VisiTrip/VisiSafe technology and DIN rail mounting for circuit protection.
Buy now and receive it between 20 and November 23
Express delivery
Get +79 +158 Sumis for the purchase
Receive 2x Sumis for a limited time
More about the product

Information about Contactor 18A 1 NO/1 NC 400V 50-60HZ

The Schneider Electric Acti9 iC60L A9F94410 thermal-magnetic circuit breaker is a modular automatic switch with 4 protected poles, 10 A and C curve, designed to protect electrical circuits against overloads and short circuits. Its high breaking capacity, thermomagnetic tripping technology, and VisiTrip and VisiSafe signaling systems make it an especially suitable solution for residential, commercial, and other electrical panels that require a high level of protection.

This thermal-magnetic circuit breaker from the Acti9 iC60L range offers a rated breaking capacity Icn of 15 kA at 400 V AC according to IEC/EN 60898-1 and an ultimate breaking capacity Icu of 25 kA at 380-415 V AC according to IEC/EN 60947-2. At 220-240 V AC, its Icu breaking capacity can reach 50 kA, providing a high ability to interrupt short-circuit currents.

Protection against overloads and short circuits

The Schneider Electric iC60L A9F94410 uses a thermomagnetic trip unit. Thermal protection acts against prolonged overloads, while magnetic protection responds quickly to high currents caused by a short circuit.

Its C tripping curve makes it suitable for many electrical distribution circuits and loads that may present moderate inrush currents. Schneider Electric specifies for this reference a magnetic threshold of 8 times the rated current, with a tolerance of ±20%.

4 protected poles and 10 A rated current

The A9F94410 features 4 poles and 4 protected poles, allowing simultaneous disconnection of all of them. Its rated current is 10 A, so it can be integrated into three-phase installations with neutral or other configurations compatible with its electrical characteristics.

  • Number of poles: 4P.
  • Protected poles: 4.
  • Rated current: 10 A.
  • Tripping curve: C.
  • Tripping technology: thermomagnetic.

High breaking capacity Acti9 iC60L

The iC60L version is designed for installations where a high capacity to interrupt short-circuit currents is required. Its main breaking capacity values include:

  • Icn at 400 V AC: 15 kA according to IEC/EN 60898-1.
  • Icu at 380-415 V AC: 25 kA according to IEC/EN 60947-2.
  • Icu at 220-240 V AC: up to 50 kA according to IEC/EN 60947-2.
  • Icu at 440 V AC: 20 kA.
  • Limitation class: 3 according to IEC/EN 60898-1.

These features make the circuit breaker suitable for installations where the expected short-circuit currents may be higher than those allowed by conventional automatic switches with lower breaking capacity.

VisiTrip technology for quick trip identification

The VisiTrip system makes it easy to locate the device that has tripped inside the electrical panel. This visual indication allows the affected circuit to be identified more quickly, reducing the time needed to locate a fault and carry out maintenance tasks.

The circuit breaker also includes local trip indication and a contact position indicator, making it easier to visually check the device status.

VisiSafe for greater safety

The VisiSafe technology in the Acti9 range is designed to improve safety during operation and maintenance tasks. The A9F94410 also features isolation suitability in accordance with applicable standards, allowing it to be used as an isolating element within the conditions specified by Schneider Electric.

Compatible with auxiliaries and Vigi residual current blocks

The modular design of the Acti9 range makes it possible to expand the circuit breaker’s functions with different compatible accessories and auxiliaries. The A9F94410 supports integration with signaling auxiliaries, control and remote monitoring devices, and Vigi residual current blocks, allowing the protection system to be adapted to the needs of each electrical panel.

It can also be used with Acti9 control and signaling accessories, making it easier to create more complete protection and control solutions.

Quick DIN rail mounting

The Schneider Electric iC60L circuit breaker is designed for fixed DIN rail mounting, making it easy to integrate into modular electrical panels. Connection can be made from the top or bottom, and the device is compatible with suitable Acti9 distribution systems and comb busbars.

  • Mounting type: fixed.
  • Support: DIN rail.
  • Width: 72 mm.
  • Height: 85 mm.
  • Depth: 78.5 mm.
  • Weight: approximately 0.5 kg.
  • Color: white.

Electrical connections

The terminals are designed to accept different conductor cross-sections and allow connection from either the top or bottom of the device.

  • Rigid conductor: 1 to 25 mm².
  • Flexible conductor: 1 to 16 mm².
  • Recommended stripping length: 14 mm.
  • Tightening torque: 2 Nm.

Operating voltages and frequency

The Schneider Electric A9F94410 is suitable for AC and DC installations within the values specified by the manufacturer. In AC, it operates at a nominal frequency of 50/60 Hz.

  • Rated operating voltage in AC: 220-240 V, 380-415 V, 400 V and up to 440 V, depending on configuration and applicable breaking capacity.
  • Rated operating voltage in DC: 180-250 V.
  • Rated insulation voltage Ui: 500 V.
  • Impulse withstand voltage Uimp: 6 kV.
  • Frequency: 50/60 Hz.
  • Overvoltage category: IV.

High electrical and mechanical durability

The Acti9 iC60L is designed to provide a long service life in demanding electrical installations. Schneider Electric specifies a mechanical durability of up to 20,000 cycles and an electrical durability of up to 10,000 cycles.

Its modular design and the build quality of the Acti9 range make it a suitable solution for both new installations and electrical panel expansions and renovations.

Protection and environmental conditions

  • Degree of protection: IP20.
  • Pollution degree: 3.
  • Operating ambient temperature: from -35 °C to 70 °C.
  • Storage temperature: from -40 °C to 85 °C.
  • Relative humidity: up to 95% at 55 °C.
  • Maximum operating altitude: 2,000 m.

Standards and technical characteristics

The Schneider Electric Acti9 iC60L A9F94410 thermal-magnetic circuit breaker complies with the main standards applicable to miniature circuit breakers for electrical installations, including IEC/EN 60898-1 and IEC/EN 60947-2.

  • Brand: Schneider Electric.
  • Range: Acti9.
  • Series: iC60L.
  • Reference: A9F94410.
  • Type: modular thermal-magnetic circuit breaker.
  • Number of poles: 4P.
  • Number of protected poles: 4.
  • Rated current: 10 A.
  • Curve: C.
  • Technology: thermomagnetic.
  • Icn at 400 V AC: 15 kA according to IEC/EN 60898-1.
  • Icu at 380-415 V AC: 25 kA according to IEC/EN 60947-2.
  • Icu at 220-240 V AC: 50 kA according to IEC/EN 60947-2.
  • Limitation class: 3.
  • Frequency: 50/60 Hz.
  • Insulation voltage: 500 V.
  • Impulse withstand: 6 kV.
  • Mounting: DIN rail.
  • Dimensions: 72 x 85 x 78.5 mm.
  • Weight: 0.5 kg.
  • Degree of protection: IP20.
  • Mechanical durability: 20,000 cycles.
  • Electrical durability: 10,000 cycles.
  • EAN: 3606480084324.

Professional protection for demanding electrical panels

The Schneider Electric Acti9 iC60L 4P 10A C curve thermal-magnetic circuit breaker stands out for combining high breaking capacity with VisiTrip and VisiSafe technologies and the possibility of adding different Acti9 auxiliaries. It is an especially suitable option for installations that require reliable protection against overloads and short circuits, high interrupting capacity, and easy maintenance.

Specifications
Manufacturer
SCHNEIDER ELECTRIC
Reference
LC1D18V7
SKU
SCHD21658E9
Object
Contactor
Number of poles
3 NA
Assembly
Plate. Profile
Warranty
18 months
Compliance with RoHS
YES
Number of contacts
1 NA + 1 NC A
Operating temperature
-20.00 - 60.00 °C
Datasheets
Reviews
Returns within 30 days
Shop with peace of mind. If something goes wrong, we'll take care of it.
After-sales service
Any questions? Our support team will be happy to help you.
Pay how and when you want
Card, bank transfer, PayPal... Installment? We have them all.
GroupSumi is your online distributor for construction, electrical material and climate control.
All rights reserved © 2026 GroupSumi