

The Schneider Electric TeSys Deca LC1D25BL contactor is an electromechanical device with 3 poles and 25 A, designed for switching motors and resistive loads in electrical panels and automation systems. It features 3 normally open main contacts, a low-consumption 24 V DC control coil, and two integrated auxiliary contacts 1 NO + 1 NC. In AC-3 category, it can control three-phase motors up to 11 kW at 380-400 V.
The LC1D25BL reference belongs to Schneider Electric’s TeSys range and is suitable for industrial applications, machinery, HVAC, ventilation, pumping, and other systems where frequent and reliable switching of motors or electrical loads is required.
The LC1D25BL offers a rated operational current of 25 A up to 440 V AC in AC-3 category, corresponding to starting and switching off during normal operation of squirrel-cage motors.
For resistive or slightly inductive loads in AC-1 category, Schneider Electric specifies a rated current of up to 40 A at 60 °C.
This model incorporates a low-consumption 24 V DC control coil, especially suitable for automation and control circuits operating with low-voltage direct current.
The coil includes an integrated bidirectional peak-limiting diode suppressor, designed to limit overvoltages produced during switch-off and facilitate integration with other electronic devices in the control circuit.
In addition to the three main power contacts, the Schneider Electric LC1D25BL includes as standard 1 normally open auxiliary contact and 1 normally closed auxiliary contact.
These contacts can be used for signaling, interlocking, status feedback, and other functions within the control circuit. Schneider Electric specifies that the NO and NC contacts are mechanically linked in accordance with IEC 60947-5-1, while the NC contact serves as a mirror contact according to IEC 60947-4-1.
The permissible motor power depends on the supply voltage and utilization category. In AC-3 category, the LC1D25BL supports the following power ratings:
In AC-4 category at 400 V, intended for more demanding operations such as inching, reversing, or braking, the specified motor power is up to 5.5 kW.
The contactor’s main circuit supports a rated operational voltage of up to 690 V AC, with frequencies between 25 and 400 Hz. It can also be used in direct current up to 300 V within the conditions specified by Schneider Electric.
The TeSys LC1D25BL is designed for applications requiring frequent switching. Schneider Electric declares a mechanical durability of up to 30 million cycles and a maximum operating frequency of 3,600 cycles per hour at temperatures up to 60 °C.
In AC-3 category, operating at 25 A and voltages up to 440 V, the declared electrical durability reaches approximately 1.65 million cycles.
The contactor has a rated making capacity of 450 A at 440 V for the power circuit in accordance with IEC 60947. Its rated breaking capacity also reaches 450 A at 440 V.
These values are part of the device’s switching performance and must be coordinated with the short-circuit and overload protection provided in each installation.
The modular design of the TeSys range allows the LC1D25BL to be combined with compatible Schneider Electric thermal overload relays to form a motor switching and protection assembly.
This configuration makes it possible to select the thermal overload relay according to the motor’s rated current and complete the starter with protection, signaling, and auxiliary devices adapted to each application.
The contactor can be installed directly on DIN rail or by panel mounting, making it easy to integrate into automation and control electrical panels.
Its width of only 45 mm allows it to be installed alongside protection devices, thermal relays, and other control equipment, making efficient use of panel space.
The Schneider Electric LC1D25BL uses screw terminals for both the power circuit and the control circuit. This system provides a robust connection and facilitates installation and maintenance tasks.
The front part of the contactor has an IP20 protection rating in accordance with IEC 60529. The product is designed to operate in professional environments and withstand vibration, impact, and high temperatures within the limits indicated by Schneider Electric.
The LC1D25BL complies with various international standards for low-voltage contactors and control devices:
The Schneider Electric TeSys Deca LC1D25BL is a solution especially suited to motor control panels and automation systems using a 24 V DC control voltage. Its 25 A AC-3 rating and up to 11 kW at 400 V make it suitable for numerous applications in machinery, pumping, ventilation, HVAC, and industrial processes.
The combination of a low-consumption coil with integrated suppression, 1 NO + 1 NC auxiliary contacts, high durability, and DIN rail or panel mounting makes it easy to build compact, reliable switching systems adaptable to different professional needs.