

The Schneider Electric LC1D25V7 contactor from the TeSys Deca range is a three-pole contactor designed for controlling electric motors and resistive loads in automation panels, machinery, and industrial installations. It offers a rated operational current of 25 A in AC-3 and AC-3e categories up to 440 V, includes a 400 V AC control coil at 50/60 Hz, and can control three-phase motors up to 11 kW at 380-400 V.
It features 3 normally open main contacts for the power circuit and 1 normally open auxiliary contact + 1 normally closed auxiliary contact integrated as standard. This configuration enables interlocking, signaling, interlocking, and feedback functions within automation systems without initially needing an external auxiliary block.
The LC1D25V7 is designed for electromagnetic switching of power circuits. In AC-3 category, it supports a rated current of 25 A up to 440 V at temperatures up to 60 °C, making it especially suitable for starting and stopping squirrel-cage motors.
AC-3 category applies to applications where the contactor connects the motor during starting and opens the circuit when the motor is already running normally.
The permissible motor power depends on the supply voltage. Schneider Electric specifies for this contactor:
On a typical 400 V three-phase network, it can therefore be used to control motors up to 11 kW in AC-3 category, provided the motor’s actual current and service conditions are within the manufacturer’s specifications.
The V7 suffix identifies this version with a 400 V AC coil compatible with 50 and 60 Hz. When the coil is energized, the electromagnet simultaneously actuates the main and auxiliary contacts. When control voltage is removed, the contactor returns to its rest position.
Schneider Electric specifies an operating range of approximately 0.8 to 1.1 times Uc at 50 Hz and 0.85 to 1.1 times Uc at 60 Hz between -40 and 60 °C.
The main circuit has 3 normally open contacts, one for each phase. These contacts connect and disconnect the supply to the motor or load.
The 1 NO + 1 NC indicated in the commercial title refers to the auxiliary contacts and not the main contacts, which are three normally open contacts.
The LC1D25V7 includes as standard:
These contacts can be used for self-holding, status indication, electrical interlocking, auxiliary relay control, or signal feedback to PLCs and other automation systems.
The auxiliary contacts are mechanically linked in accordance with IEC 60947-5-1, while the NC contact has a mirror contact function in accordance with IEC 60947-4-1.
The switching capacity depends on the utilization category:
AC-3 category is mainly intended for motors, while AC-1 corresponds to non-inductive or slightly inductive loads. For this reason, the contactor must be selected taking into account both the current and the type of load connected.
The power circuit supports a rated operational voltage of up to 690 V AC, with frequency between 25 and 400 Hz. Schneider Electric also allows DC use up to 300 V within the configurations specified by the manufacturer.
The rated insulation voltage is 690 V according to IEC 60947-4-1 and the rated impulse withstand voltage Uimp reaches 6 kV. The device belongs to overvoltage category III and pollution degree 3.
For the main circuit, Schneider Electric specifies a conventional free-air thermal current Ith of 40 A at 60 °C.
For the signaling auxiliary circuit, the conventional thermal current is 10 A at 60 °C.
The contactor has a rated making capacity of 450 A at 440 V in the power circuit according to IEC 60947.
The rated breaking capacity also reaches 450 A at 440 V, providing the performance required for switching motors and other compatible loads.
The technical data sheet specifies the following short-time withstand current values for the power circuit:
These values do not replace the short-circuit protection that must be installed upstream of the contactor.
Schneider Electric specifies the following associations for the power circuit:
For the auxiliary circuit, a 10 A gG fuse is specified. Final selection should be made using the manufacturer’s coordination tables and considering the actual motor characteristics.
The LC1D25V7 is designed for applications with a high number of switching operations:
The coil has higher consumption during the initial closing instant and lower consumption once the contactor remains energized:
These values should be considered when sizing the circuit or transformer supplying several contactor coils.
Schneider Electric specifies reduced operating times:
These characteristics make it suitable for automation systems requiring a fast response to control commands.
The LC1D25V7 can be installed on both DIN rail and directly on a mounting plate. This flexibility makes it easy to integrate into modular electrical panels and industrial automation cabinets.
Connection is made using screw terminals. For the main circuit, Schneider Electric allows conductors up to 10 mm² depending on the type and number of cables used.
The specified tightening torques are:
The Schneider Electric LC1D25V7 offers high switching capacity in a compact size:
Its 45 mm width makes it easy to install multiple contactors and protection devices inside space-limited enclosures.
The front of the contactor has an IP20 protection rating according to IEC 60529. The equipment must be installed inside a panel or enclosure that provides the level of protection required by the environment.
It also features TH protective treatment in accordance with IEC 60068-2-30.
The LC1D25V7 can be combined with various Schneider Electric TeSys accessories to build complete switching and protection solutions:
Specific compatibility should be checked according to the contactor size and the required function.
Thanks to its 25 A rating and 400 V AC coil, it can be used in many professional applications:
The contactor is designed in accordance with applicable international standards for switching and control equipment, including:
The Schneider Electric LC1D25V7 combines a rated current of 25 A in AC-3/AC-3e, capability for three-phase motors up to 11 kW at 400 V, and a 400 V AC control coil at 50/60 Hz. The three normally open main contacts switch the power circuit, while the 1 NO + 1 NC auxiliary contacts provide interlocking, signaling, and automation functions.
Its compact 45 mm format, DIN rail or plate mounting, high durability, and compatibility with TeSys Deca accessories make this reference a versatile solution for pumps, fans, compressors, machinery, HVAC, and industrial control panels.
Final selection should be made taking into account the actual load current and power, utilization category, mains voltage, switching frequency, and coordination with overload and short-circuit protection.