

The Schneider Electric TeSys D LC1D32E7 contactor is a three-pole electromechanical contactor designed for motor control and resistive loads in electrical panels, machinery, and automation systems. It features 3 normally open main contacts (3 NO), a rated operational current of 32 A in AC-3 category up to 440 V, and a 48 V AC control coil at 50/60 Hz.
In addition to the main power contacts, it includes 2 auxiliary contacts, 1 NO + 1 NC as standard, enabling signaling, interlocking, feedback, and control functions within the control circuit. At 380-400 V, it can control three-phase motors up to 15 kW.
The LC1D32E7 belongs to the TeSys D family, now also marketed within Schneider Electric's TeSys Deca range. It is specially designed for motor control applications and switching resistive loads.
In AC-3 and AC-3e utilization category, it supports an operational current of 32 A up to 440 V AC. For resistive loads in AC-1 category, its thermal operational current reaches 50 A at temperatures below 60 °C.
The maximum motor power depends on the supply voltage and utilization category. In AC-3 applications, Schneider Electric specifies the following power ratings:
These capabilities make the LC1D32E7 suitable for controlling pumps, fans, compressors, HVAC systems, machinery, and other properly sized three-phase electric motors.
The contactor coil operates with a 48 V AC control voltage at both 50 and 60 Hz. This control voltage makes it easy to integrate into auxiliary industrial automation and control circuits.
The contactor comes factory-fitted with 1 normally open auxiliary contact and 1 normally closed auxiliary contact. These contacts can be used for electrical interlocking, status indication, feedback to PLCs or control systems, and other auxiliary functions.
The NO and NC auxiliary contacts are mechanically linked in accordance with IEC 60947-5-1. The NC contact also features mirror contact function in accordance with IEC 60947-4-1.
The main circuit of the Schneider Electric LC1D32E7 supports a rated operational voltage of up to 690 V AC between 25 and 400 Hz. It can also be used in certain DC applications up to 300 V DC within the conditions specified by Schneider Electric.
The TeSys D LC1D32E7 is designed for applications with a high number of switching operations. Schneider Electric states a mechanical durability of up to 15 million cycles.
When operating with a 32 A load in AC-3 category at voltages up to 440 V, electrical durability reaches approximately 1.65 million cycles.
The electromechanical mechanism provides short operating times, suitable for automation systems and motor control:
The LC1D32E7 uses screw terminals for both the power circuit and the control circuit. The power terminals accept conductors up to 10 mm² depending on type and termination.
The Schneider Electric TeSys D LC1D32E7 can be installed on a DIN rail or directly on a mounting plate, offering flexibility for integration into control, automation, and distribution electrical panels.
Its width of only 45 mm helps save space inside the electrical enclosure.
The contactor has an IP20 front protection rating in accordance with IEC 60529 and is intended for installation inside a suitable panel or electrical enclosure.
It can operate at ambient temperatures from -40 to 60 °C without derating and up to 70 °C with the derating conditions specified by Schneider Electric.
The Schneider Electric LC1D32E7 complies with the main international standards applicable to low-voltage contactors and control devices, including:
It also has various international certifications, including UL, CSA, CCC, DNV, BV, and RINA.
The Schneider Electric TeSys D LC1D32E7 32 A contactor is a professional solution for controlling three-phase motors and electrical loads. Its 3 NO main contacts, 48 V AC coil, integrated 1 NO + 1 NC auxiliary contacts, and capability for motors up to 15 kW at 400 V make it especially suitable for automation panels, HVAC systems, pumps, fans, and industrial machinery.