

The Schneider Electric TeSys Deca LC1D38P7 contactor is a three-pole contactor designed for motor control and resistive loads in industrial, commercial, and automation systems. It offers a rated operational current of 38 A in AC-3 and AC-3e categories up to 440 V, includes a 230 V AC control coil at 50/60 Hz, and can control three-phase motors up to 18.5 kW at 380-400 V.
The device features 3 normally open main contacts for the power circuit and, additionally, comes standard with 1 normally open auxiliary contact and 1 normally closed auxiliary contact. This configuration makes it easy to create interlocking, signaling, and automation circuits without immediately needing to install an additional auxiliary block.
The LC1D38P7 is specially designed for switching electric motors. In AC-3 and AC-3e utilization category, it supports a rated current of 38 A up to 440 V AC, providing a suitable solution for frequent starting and stopping of squirrel-cage motors within the limits established by Schneider Electric.
In a three-phase 380-400 V network, the contactor is specified for motors up to 18.5 kW in AC-3. At 220-230 V AC, the indicated motor rating is 9 kW.
The permissible current of the contactor depends on the type of load and the utilization category. Schneider Electric specifies:
AC-3 is mainly associated with switching squirrel-cage motors, while AC-1 corresponds primarily to non-inductive or slightly inductive loads. For this reason, selection should always be based on the type of load and its utilization category, not only on the stated current rating.
The P7 version of this reference includes an electromagnetic coil with a 230 V AC control voltage at 50/60 Hz. This allows the contactor to be integrated into control circuits powered directly at this voltage using pushbuttons, relays, PLCs, thermostats, pressure switches, or other suitable control devices.
When the coil is energized, the three main contacts close simultaneously to supply the load. When the control voltage disappears, the mechanism opens the contacts again.
The power circuit has 3 NO main contacts, one for each phase of a three-phase installation. These contacts are designed to perform load switching operations within the specified electrical limits.
It is important to distinguish these main contacts from the auxiliary contacts. Although the product may be commercially described as “1 NO/1 NC,” this refers to the integrated auxiliary contacts; the main circuit has three normally open contacts.
The LC1D38P7 comes factory-fitted with 1 normally open auxiliary contact and 1 normally closed auxiliary contact. Both can be used for control and signaling functions, such as:
Schneider Electric specifies the auxiliary NC contact as a mirror contact in accordance with IEC 60947-4-1, and the auxiliary contacts are mechanically linked according to IEC 60947-5-1.
The permissible motor power depends on the voltage and the utilization category. For AC-3 operation, Schneider Electric specifies:
In AC-4 category at 400 V, intended for more demanding switching conditions, the indicated power is 7.5 kW.
The power circuit is designed to operate at a rated operational voltage of up to 690 V AC between 25 and 400 Hz. It also supports DC applications up to the limits defined by Schneider Electric.
The rated insulation voltage of the power circuit reaches 690 V according to IEC 60947-4-1, while the impulse withstand voltage Uimp is 6 kV.
The LC1D38P7 has a rated making capacity of 550 A at 440 V for the power circuit in accordance with IEC 60947. Schneider Electric also specifies a rated breaking capacity of 550 A at 440 V under the corresponding test conditions.
These characteristics are designed to withstand the transient currents associated with motor switching and other industrial loads.
The TeSys Deca range is designed for applications with a high number of switching operations. For this reference, a mechanical durability of up to 15 million cycles is specified.
Electrical durability can reach approximately 1.4 million cycles in AC-3 at 38 A and up to 440 V, depending on the specific operating conditions.
The contactor also supports high switching frequencies, making it suitable for industrial automation, pumping, ventilation, and machinery with repetitive cycles.
The Schneider Electric LC1D38P7 supports two installation methods:
This dual mounting option makes it easy to integrate into both modular panels and industrial automation and control cabinets.
The power and control circuits use screw terminals designed to provide a reliable mechanical and electrical connection. Schneider Electric specifies conductor cross-sections suitable for the contactor’s rated current for the power circuit, and the cable must be selected according to current, temperature, installation method, and applicable standards.
The use of multi-standard screws also simplifies installation and maintenance with common tools.
Despite its 38 A capacity, the TeSys Deca maintains compact dimensions that make installation in electrical panels easier:
The width of only 45 mm helps optimize available space in control and automation panels.
The contactor offers a front protection rating of IP20 in accordance with IEC 60529. It must be installed inside a suitable panel or enclosure that provides the level of protection required by the installation environment.
The unit also includes a protective cover over its components and is designed for industrial and HVAC applications.
Schneider Electric specifies normal operation in environments up to 60 °C, allowing higher temperatures with the corresponding performance derating established by the manufacturer.
The technical documentation covers a wide ambient range, allowing the contactor to be used in automation panels installed in demanding industrial environments as long as its electrical and thermal limits are respected.
The LC1D38P7 can be combined with numerous Schneider Electric TeSys accessories, allowing complete motor starters and control systems to be built. These may include:
This modularity makes it easy to adapt the contactor to different automation and motor protection architectures.
Due to its electrical characteristics and high switching capacity, this contactor can be used in many professional applications:
The TeSys Deca LC1D38P7 is designed in accordance with international standards applicable to contactors and control devices, including:
The range also has various international certifications that allow it to be integrated into machinery and panels intended for different markets.
The Schneider Electric LC1D38P7 combines a 38 A AC-3/AC-3e rating, motor power up to 18.5 kW at 400 V, and a 230 V AC control coil in a compact 45 mm-wide format. Its three normally open main contacts allow three-phase loads to be controlled, while the integrated 1 NO + 1 NC auxiliary contacts simplify automation and signaling circuits.
Its compatibility with TeSys Deca accessories, the option for DIN rail or plate mounting, and its high durability make it a versatile solution for motor control panels, pumps, fans, machinery, and HVAC systems. Final selection should be made based on the utilization category, motor power, supply voltage, and actual installation conditions.