Contactor 38A 1 NO/1 NC 24V 50-60HZ with reference LC1D38B7 from the brand SCHNEIDER ELECTRIC
Contactor 38A 1 NO/1 NC 24V 50-60HZ with reference LC1D38B7 from the brand SCHNEIDER ELECTRIC
SCHNEIDER ELECTRIC

Contactor 38A 1 NO/1 NC 24V 50-60HZ

REF
LC1D38B7
(0)
160.00 €
€160.00
€387.32
Up to -6% for professionals. Discover it.
Schneider Electric TeSys D 38A AC-3 contactor, 3P with 3 NO, 24V AC 50/60Hz coil and 1 NO + 1 NC auxiliary, for three-phase motors up to 18.5 kW at 400V and resistive loads.
Buy now and receive it between 20 and November 23
Express delivery
Get +160 +320 Sumis for the purchase
Receive 2x Sumis for a limited time
More about the product

Information about Contactor 38A 1 NO/1 NC 24V 50-60HZ

The Schneider Electric TeSys D LC1D38B7 contactor is a three-pole electromechanical contactor designed for motor control and switching resistive loads. It features 3 normally open main contacts (3 NO), a rated operational current of 38 A in AC-3 and AC-3e categories up to 440 V, and a 24 V AC coil at 50/60 Hz.

In addition to the main power contacts, the LC1D38B7 includes as standard 1 NO auxiliary contact + 1 NC auxiliary contact, ideal for interlocking, signaling, and control functions. In three-phase motor applications, it can switch equipment up to 18.5 kW at 380-400 V AC, making it suitable for automation panels, machinery, pumps, fans, compressors, and HVAC systems.

38 A TeSys D three-pole contactor

The LC1D38B7 reference belongs to Schneider Electric's TeSys D / TeSys Deca range. It is designed for applications requiring high switching reliability and a compact design.

  • Number of poles: 3P.
  • Main contacts: 3 NO.
  • Rated AC-3 current: 38 A up to 440 V AC.
  • Rated AC-3e current: 38 A up to 440 V AC.
  • Rated AC-1 current: 50 A up to 440 V AC at temperatures less than or equal to 60 °C.
  • Applications: motor control and resistive loads.
  • Utilization categories: AC-1, AC-3, AC-3e and AC-4.

24 V AC 50/60 Hz coil

The contactor is operated by a 24 V AC control coil compatible with 50 and 60 Hz frequencies. This control voltage makes it suitable for integration into auxiliary automation circuits, relays, PLCs, and industrial control systems operating at 24 V AC.

  • Coil voltage: 24 V AC.
  • Frequency: 50/60 Hz.
  • Inrush power: 70 VA.
  • Holding consumption at 50 Hz: 7 VA.
  • Holding consumption at 60 Hz: 7.5 VA.
  • Coil thermal dissipation: 2-3 W.
  • Built-in suppressor: no.

Up to 18.5 kW power at 400 V

In AC-3 category, Schneider Electric specifies different maximum motor power ratings depending on the supply voltage:

  • 9 kW at 220-230 V AC.
  • 18.5 kW at 380-400 V AC.
  • 18.5 kW at 415-440 V AC.
  • 18.5 kW at 500 V AC.
  • 18.5 kW at 660-690 V AC.

In AC-4 category, intended for more demanding motor switching, the contactor supports up to 7.5 kW at 400 V AC.

Integrated 1 NO + 1 NC auxiliary contacts

The LC1D38B7 comes factory-fitted with one normally open auxiliary contact and one normally closed auxiliary contact. These contacts make it easy to create self-holding circuits, signaling, electrical interlocking, or feedback to automation systems.

  • Auxiliary contacts: 1 NO + 1 NC.
  • Mechanically linked contacts: compliant with IEC 60947-5-1.
  • Mirror NC contact: compliant with IEC 60947-4-1.
  • Minimum switching current: 5 mA.
  • Minimum switching voltage: 17 V.

Main circuit up to 690 V AC

The power circuit is designed to operate at utilization voltages up to 690 V AC and frequencies between 25 and 400 Hz. It also supports certain DC applications up to 300 V DC.

  • Maximum AC utilization voltage: 690 V.
  • Power circuit frequency: 25-400 Hz.
  • Maximum DC utilization voltage: 300 V.
  • Rated insulation voltage Ui: 690 V according to IEC 60947.
  • Impulse withstand voltage Uimp: 6 kV.
  • Overvoltage category: III.
  • Pollution degree: 3.

High making and breaking capacity

The Schneider Electric LC1D38B7 has a rated making capacity of 550 A at 440 V and an equally rated breaking capacity of 550 A at 440 V according to IEC 60947.

It also has different short-time withstand current ratings:

  • 430 A for 1 second.
  • 310 A for 10 seconds.
  • 150 A for 1 minute.
  • 60 A for 10 minutes.

15 million mechanical cycles

The contactor is designed to withstand a high number of operations over its service life, a particularly important feature in automation and motor control applications.

  • Mechanical durability: 15 million cycles.
  • Electrical durability AC-3 at 38 A: 1.4 million cycles.
  • Electrical durability AC-3e at 38 A: 1.4 million cycles.
  • Electrical durability AC-1 at 50 A: 1.4 million cycles.
  • Maximum switching frequency: 3,600 cycles/h at 60 °C.

Fast closing and opening times

The electromagnetic mechanism offers short operating times, suitable for industrial automation applications:

  • Closing time: 12-22 ms.
  • Opening time: 4-19 ms.

DIN rail or panel mounting

The LC1D38B7 can be installed on a DIN rail or directly on a panel, allowing it to adapt to different electrical panel and machinery configurations.

  • Height: 85 mm.
  • Width: 45 mm.
  • Depth: 92 mm.
  • Weight: approximately 0.38 kg.
  • Mounting: DIN rail or panel.

Its 45 mm width makes it possible to build compact starters together with motor circuit breakers, thermal overload relays, and other compatible TeSys accessories.

Screw terminals

The main circuit and control circuit use screw terminals. The power circuit accepts conductors up to 10 mm² depending on the type and termination used.

  • Power circuit: conductors up to 10 mm² depending on configuration.
  • Control circuit: conductors up to 4 mm² depending on configuration.
  • Power circuit tightening torque: 2.5 Nm.
  • Control circuit tightening torque: 1.7 Nm.

IP20 front protection

The contactor has an IP20 front protection rating in accordance with IEC 60529. It is designed to be installed inside an electrical enclosure or cabinet that provides the protection level required by the environment.

  • Front protection rating: IP20.
  • Operating temperature: -40 to 60 °C without derating.
  • Operation between 60 and 70 °C: possible with derating.
  • Maximum operating altitude: 3,000 m.
  • Fire resistance: 850 °C according to IEC 60695-2-1.

Standards and certifications

The Schneider Electric TeSys D LC1D38B7 complies with the main international standards applicable to contactors and auxiliary control devices.

  • IEC 60947-4-1.
  • IEC 60947-5-1.
  • EN 60947-4-1.
  • EN 60947-5-1.
  • IEC 60335-1.
  • UL 60947-4-1.
  • CSA C22.2 No. 60947-4-1.

It also has international certifications such as UL, CSA, CCC, Marine, UKCA, EAC and CB Scheme.

Schneider Electric LC1D38B7 technical characteristics

  • Brand: Schneider Electric.
  • Range: TeSys.
  • Series: TeSys D / TeSys Deca.
  • Reference: LC1D38B7.
  • Type: electromechanical contactor.
  • Application: motor control and resistive loads.
  • Number of poles: 3P.
  • Main contacts: 3 NO.
  • Auxiliary contacts: 1 NO + 1 NC.
  • Rated AC-3 current: 38 A up to 440 V AC.
  • Rated AC-3e current: 38 A up to 440 V AC.
  • Rated AC-1 current: 50 A up to 440 V AC.
  • Power at 220-230 V: 9 kW.
  • Power at 380-400 V: 18.5 kW.
  • Power at 415-440 V: 18.5 kW.
  • Power at 500 V: 18.5 kW.
  • Power at 660-690 V: 18.5 kW.
  • AC-4 power at 400 V: 7.5 kW.
  • Maximum power circuit voltage: 690 V AC.
  • Coil voltage: 24 V AC.
  • Coil frequency: 50/60 Hz.
  • Inrush power: 70 VA.
  • Holding consumption: 7 VA at 50 Hz / 7.5 VA at 60 Hz.
  • Built-in coil suppressor: no.
  • Insulation voltage Ui: 690 V.
  • Impulse withstand voltage Uimp: 6 kV.
  • Mechanical durability: 15 million cycles.
  • Electrical durability AC-3: 1.4 million cycles.
  • Maximum switching frequency: 3,600 cycles/h.
  • Closing time: 12-22 ms.
  • Opening time: 4-19 ms.
  • Terminals: screw terminals.
  • Mounting: DIN rail or panel.
  • Dimensions: 85 x 45 x 92 mm.
  • Weight: approximately 0.38 kg.
  • Front protection: IP20.
  • Operating temperature: -40 to 60 °C without derating.

The Schneider Electric TeSys D LC1D38B7 38 A contactor offers a robust solution for switching three-phase motors and resistive loads. Its 3 NO main contacts, 24 V AC 50/60 Hz coil, 1 NO + 1 NC auxiliary contacts, and capacity for motors up to 18.5 kW at 400 V make it easy to integrate into automation panels, machinery, HVAC systems, pumps, fans, and compressors.

Specifications
Manufacturer
SCHNEIDER ELECTRIC
Reference
LC1D38B7
SKU
SCHCE10D290
Object
Contactor
Number of poles
3 NA
Assembly
Plate. Profile
Warranty
18 months
Compliance with RoHS
YES
Number of contacts
1 NA + 1 NC A
Operating temperature
-20.00 - 60.00 °C
Datasheets
Reviews
Returns within 30 days
Shop with peace of mind. If something goes wrong, we'll take care of it.
After-sales service
Any questions? Our support team will be happy to help you.
Pay how and when you want
Card, bank transfer, PayPal... Installment? We have them all.
GroupSumi is your online distributor for construction, electrical material and climate control.
All rights reserved © 2026 GroupSumi