

The Schneider Electric TeSys Deca LC1D09F7 contactor is a power switching device with 3 poles and 3 normally open main contacts, designed for motor control and resistive loads. It offers a rated current of 9 A in AC-3/AC-3e categories up to 440 V, can control motors up to 4 kW at 380-440 V, and includes a 110 V AC control coil at 50/60 Hz. It also comes standard with 1 NO auxiliary contact and 1 NC auxiliary contact, enabling signaling, interlocking, and automation functions without the need to initially add an external auxiliary block.
The LC1D09F7 reference belongs to Schneider Electric's TeSys Deca family and is intended for professional applications in motor control, HVAC, machinery, and automation. It uses screw terminals, can be mounted on DIN rail or plate, and has a compact 45 mm width. Its design allows it to be combined with thermal overload relays, motor circuit breakers, and TeSys accessories to build complete motor starters.
The LC1D09F7 has 3 normally open main poles. When the coil is energized, the three main contacts close simultaneously and supply the load; when the coil is de-energized, they return to the open position.
In addition to the three main power contacts, the contactor includes two instantaneous auxiliary contacts as standard: 1 NO + 1 NC.
It is important to distinguish between both contact types:
The auxiliary contacts are mechanically linked in accordance with IEC 60947-5-1, and the NC contact fulfills the mirror contact function in accordance with IEC 60947-4-1.
In AC-3/AC-3e category, Schneider Electric specifies different maximum motor power ratings depending on the supply voltage:
On a typical 400 V three-phase network, the LC1D09F7 can therefore switch a motor up to 4 kW, provided that the rated current and starting conditions are compatible with the contactor's 9 A AC-3/AC-3e rating.
The F7 suffix identifies this version with a standard 110 V AC coil at 50/60 Hz.
This coil allows the contactor to be controlled from different control circuit devices, such as:
The specified operating range for the coil is approximately 0.8 to 1.1 × Uc at 50 Hz and 0.85 to 1.1 × Uc at 60 Hz under the specified conditions.
Schneider Electric specifies the following approximate values at 20 °C:
The standard coil does not include an integrated suppression module. If the application requires limiting overvoltages generated when the coil is switched off, the corresponding compatible suppression accessory must be selected.
In addition to its 9 A capacity for motors in AC-3/AC-3e, the LC1D09F7 can be used for resistive or weakly inductive loads in AC-1 category.
The 25 A AC-1 and 9 A AC-3 values correspond to different load conditions and must not be interchanged when sizing the contactor.
The contactor is intended for different utilization categories:
In AC-4 category, Schneider Electric specifies a motor power of approximately 2.2 kW at 400 V.
The main circuit has a rated making capacity of 250 A at 440 V in accordance with IEC 60947.
The rated breaking capacity of the main circuit also reaches 250 A at 440 V under the conditions established by the manufacturer.
These values represent the contactor's switching performance and must not be confused with short-circuit breaking capacity. The LC1D09F7 requires suitable external overcurrent protection.
The LC1D09F7 is a switching and control device. It does not include built-in overload or short-circuit protection.
Schneider Electric specifies, among other coordinated protections:
In motor applications, it can be combined with a properly selected TeSys motor circuit breaker or thermal overload relay to provide overload and short-circuit protection.
The main insulation and voltage characteristics are:
The LC1D09F7 reference uses screw terminals for both power and control circuits.
Depending on the type and number of conductors, it accepts cross-sections of up to approximately 4 mm².
Proper terminal tightening is essential to ensure a reliable connection and avoid abnormal heating.
The Schneider Electric LC1D09F7 supports two main installation methods:
This flexibility makes it easy to integrate into both small automation panels and larger industrial enclosures.
Its 45 mm width allows three power poles and two integrated auxiliary contacts to be housed in a reduced panel space.
The LC1D09F7 supports a maximum operating frequency of up to 3,600 cycles per hour at temperatures up to 60 °C.
The specified operating times are:
Schneider Electric specifies:
Actual service life depends on the utilization category, current, voltage, switching frequency, and environmental conditions.
The front face of the contactor offers an IP20 protection rating in accordance with IEC 60529.
The device is intended to be installed inside a panel or suitable enclosure that provides the protection level required by the application.
The contactor can be used in a wide range of professional control systems:
The Schneider Electric TeSys Deca LC1D09F7 combines three NO main contacts, 9 A in AC-3/AC-3e, and a 110 V AC 50/60 Hz coil in a compact format. Its integrated 1 NO + 1 NC auxiliaries make it possible to perform interlocking, signaling, and control functions without initially adding an external auxiliary block.
The ability to handle motors up to 4 kW at 400 V, high durability, screw terminals, and DIN rail or plate mounting make this reference a versatile solution for machinery, HVAC, pumping, and industrial automation.
Important: the LC1D09F7 is a switching device and not a motor protection device. It does not protect by itself against overloads or short circuits. It must be combined with a motor circuit breaker, thermal overload relay, fuses, or an automatic circuit breaker properly selected and coordinated with the load.