

The Schneider Electric TeSys D LC1D09P7 contactor is a 3-pole electromechanical device designed for the control and switching of electric motors and resistive loads. It offers a rated operational current of 9 A in AC-3 category up to 440 V, incorporates 3 normally open main contacts (3 NO), and features a 230 V AC coil at 50/60 Hz.
In addition to the three main power contacts, the LC1D09P7 includes as standard 1 normally open auxiliary contact and 1 normally closed auxiliary contact (1 NO + 1 NC), making it ideal for control circuits, signaling, electrical interlocking, and industrial automation.
The LC1D09P7 reference belongs to Schneider Electric's TeSys family and is specifically designed for motor control and resistive load switching applications. In AC-3 utilization category, it supports a rated current of 9 A at voltages up to 440 V AC.
For resistive loads in AC-1 category, the contactor supports a thermal current of up to 25 A at ambient temperatures up to 60 °C.
The Schneider Electric LC1D09P7 can control three-phase motors of different power ratings depending on the supply voltage. According to the manufacturer's data, its main capacities in AC-3 category are:
These features make it a suitable solution for switching small motors used in pumps, fans, compressors, machinery, and other electrical equipment.
The LC1D09P7 coil operates with a 230 V AC control voltage at both 50 and 60 Hz, allowing the contactor to be actuated from pushbuttons, relays, automation systems, PLCs, or other compatible control devices.
In addition to the main power contacts, this contactor includes two integrated auxiliary contacts: 1 NO and 1 NC. These contacts can be used for status indication, electrical interlocking, feedback in control systems, and other auxiliary functions.
The normally closed contact features mirror contact function according to IEC 60947-4-1, and the NO and NC auxiliary contacts are mechanically linked according to IEC 60947-5-1.
The TeSys D LC1D09P7 is designed for applications involving frequent switching. Schneider Electric specifies a mechanical durability of up to 15 million cycles.
Under AC-3 conditions at 9 A and voltages up to 440 V, its electrical durability reaches approximately 2 million cycles. The specified maximum switching frequency is up to 3,600 cycles per hour at temperatures up to 60 °C.
The electromechanical mechanism provides short operating times, suitable for automation and motor control applications.
The contactor main circuit supports a rated operational voltage of up to 690 V AC with frequencies between 25 and 400 Hz. It can also be used in certain DC applications with voltages up to 300 V DC, always within the conditions specified by Schneider Electric.
The rated insulation voltage reaches 690 V according to IEC 60947, while the impulse withstand voltage is 6 kV.
The LC1D09P7 offers installation flexibility and can be mounted on a DIN rail or directly on a panel. Its compact format makes it easy to integrate into automation panels, motor control centers, and electrical distribution systems.
The LC1D09P7 reference includes screw terminals for both the power circuit and the control circuit. It accepts rigid and flexible conductors of different cross-sections, making wiring easier in professional electrical panels.
The front of the device offers an IP2X protection rating according to IEC 60529. The contactor is designed to operate at ambient temperatures between -5 and 60 °C and can be used up to an altitude of 3,000 meters without temperature derating under the conditions specified by Schneider Electric.
The Schneider Electric TeSys D LC1D09P7 is a compact and robust contactor for motor control and electrical loads. Its 9 A AC-3 rating, capability for three-phase motors up to 4 kW at 400 V, 230 V AC coil, and integrated 1 NO + 1 NC auxiliary contacts make it suitable for electrical panels, industrial automation, HVAC systems, pumps, fans, and machinery.