

The Schneider Electric Acti9 iCT A9C20837 is a modular contactor with 4 poles and 4 normally closed contacts (4 NC), designed for remote control of electrical circuits for lighting, heating, ventilation, and small motors. It features a rated operational current of 25 A in AC-7A category and a control coil of 220-240 V AC at 50 Hz, offering a compact solution for residential, commercial, and tertiary electrical panels.
Its configuration with four normally closed contacts keeps the circuits closed while the coil remains de-energized and opens them when the contactor receives the control signal. This feature is useful in installations that require an operating logic opposite to that of conventional normally open contactors.
The A9C20837 reference features 4 poles and 4 normally closed contacts. Schneider Electric specifies a rated operational current of 25 A in AC-7A category, mainly intended for domestic or slightly inductive similar loads, and 8.5 A in AC-7B category for certain motor loads.
The rated operational voltage is 400 V AC at 50 Hz, allowing the contactor to be integrated into distribution and control circuits where remote electrical switching is required.
The contactor incorporates a 220 to 240 V AC control coil at 50 Hz. This control voltage allows it to be operated from thermostats, time switches, relays, home automation systems, or other compatible control devices.
The coil holding consumption is approximately 4.6 VA, while the inrush power reaches approximately 34 VA.
The Acti9 iCT A9C20837 is specially designed for remote control of loads commonly used in residential and tertiary installations. Its applications include:
Its integration with the control auxiliaries in the Acti9 range expands the automation possibilities of the electrical panel according to the needs of each installation.
The contactor includes a mechanical contact position indicator, making it easy to visually check its status during commissioning, diagnostics, and maintenance operations.
In addition, Schneider Electric uses a clip-on connection system that facilitates the electrical and mechanical association of the contactor with compatible Acti9 auxiliaries.
The Schneider Electric A9C20837 is designed for clip-on mounting on a 35 mm symmetrical DIN rail. Its modular format makes it easy to install alongside the rest of the protection and control devices in the electrical panel.
It occupies 4 modules of 9 mm, equivalent to a width of 36 mm, offering a compact solution for applications where optimizing available space is important.
The contactor uses tunnel terminals for power and control circuits. In the main circuit, depending on the conductor type, it accepts flexible cables up to 4 mm² and rigid conductors up to 6 mm².
The control circuit terminals accept rigid or flexible conductors up to 2.5 mm² depending on the connection configuration used.
The Acti9 iCT is designed to provide a long service life in switching applications. Schneider Electric specifies a mechanical durability of up to 1,000,000 cycles.
Electrical durability reaches up to 100,000 cycles in AC-7A category at 25 A and up to 30,000 cycles in AC-7B category at 8.5 A.
The device can operate at ambient temperatures between -5 and 60 °C and be stored between -40 and 70 °C.
The Schneider Electric A9C20837 is a particularly suitable solution when four normally closed circuits need to be controlled remotely from a control device. Its combination of 25 A, 4 NC contacts, 220-240 V AC coil, and modular DIN rail mounting makes it easy to integrate into automation panels for homes, shops, offices, and tertiary buildings.
Its compatibility with Acti9 auxiliaries, mechanical position indicator, and compact 36 mm width complete a modular contactor designed for lighting, heating, ventilation, and small motor switching applications.