

The Schneider Electric RM22TR33 is a three-phase voltage control and monitoring relay from the Harmony Control Relays range, designed to protect and monitor electrical installations supplied between 380 and 480 V AC. It can detect abnormal conditions such as overvoltage, undervoltage, phase loss, or incorrect phase sequence, helping protect motors, machinery, and other equipment connected to three-phase networks.
Its modular format of only 22.5 mm width makes it easy to integrate into electrical panels and automation systems using 35 mm DIN rail mounting. It includes 2 changeover contacts (2 C/O) with a rated output current of 8 A, providing a versatile solution for controlling contactors, signaling circuits, alarms, or shutdown systems in the event of a network anomaly.
The RM22TR33 relay continuously monitors the three supply phases. Its operation makes it possible to identify different electrical faults before they can cause damage to the installation or incorrect operation of connected equipment.
The nominal measurement range is 380 to 480 V AC between phases, with supply limits from 304 to 576 V AC and an operating frequency of 50/60 Hz ±10%. The device is powered directly from the network it monitors, simplifying panel wiring.
The relay allows the voltage threshold to be adjusted between 2% and 20% of the selected nominal voltage. This makes it possible to adapt the control sensitivity to the specific needs of each installation.
It also features an adjustable delay of 0.1 to 30 seconds when a fault is detected. This function helps prevent tripping caused by very short transient disturbances and allows the relay to be coordinated with other devices in the system.
Hysteresis is fixed at 2% of the selected value, the start-up time after power-up is approximately 650 ms, and the maximum measurement cycle is 150 ms using true RMS measurement.
The Schneider Electric RM22TR33 incorporates 2 changeover output contacts, offering flexibility for integration into control and protection circuits. Its rated output current is 8 A, with a maximum switching voltage of 250 V AC and a switching capacity of 2000 VA.
This configuration makes it possible, for example, to use one contact to control a contactor or stop a machine while the second is used for signaling, alarm, or communicating fault status to another control circuit.
Thanks to its slim format, the RM22TR33 takes up very little space inside the electrical panel. It is designed for mounting on a 35 mm DIN rail in accordance with IEC 60715 and can be installed in any position.
The screw terminals accept different conductor cross-sections, both rigid and flexible, and offer a specified tightening torque of 0.6 to 1 Nm.
The front panel includes LED indicators to make device status diagnosis easier: green LED for power presence and yellow LED to indicate the output relay status. It also features a test or diagnostic button and settings via screw selectors.
A sealable front cover protects the settings made, reducing the risk of accidental or unauthorized changes after commissioning.
This Schneider Electric three-phase monitoring relay is suitable for industrial electrical panels, building automation, pumping systems, machinery, lifting equipment, transport systems, textile installations, and other applications where it is necessary to continuously monitor the quality and presence of supply phases.
The RM22TR33 integrates the basic monitoring functions of a three-phase network into a single compact module, providing an automatic response to electrical anomalies and making it easier both to protect equipment and to diagnose faults during maintenance tasks.