

The Schneider Electric ATV320U07N4C is a variable speed drive from the Altivar Machine ATV320 range, designed for controlling synchronous and asynchronous motors in machinery and automation applications. It offers a rated power of 0.75 kW in high overload duty, three-phase supply from 380 to 500 V AC, and a rated output current of 2.3 A. Its compact format makes it easy to integrate into electrical cabinets and machine frames with limited space.
The Altivar 320 combines speed and torque control, integrated safety functions, Modbus and CANopen communications, C2 EMC filter, and different expansion options via communication modules. Its ability to control asynchronous and synchronous motors, together with an output frequency of up to 599 Hz, makes it suitable for both simple and highly dynamic machine applications.
The ATV320U07N4C is sized to work with motors up to 0.75 kW in high overload applications. The drive supply is three-phase and accepts a voltage between 380 and 500 V AC, with a tolerance of -15% to +10%.
The rated output current is 2.3 A. Drive sizing should always be checked by considering the motor rated current, load conditions, duty cycle, and the environmental conditions of the application.
Feature Value Rated power 0.75 kW Equivalent power 1 HP Supply Three-phase Supply voltage 380-500 V AC Supply tolerance -15% / +10% Mains frequency 50-60 Hz Rated output current 2.3 A Maximum output voltage 500 VThe Schneider Electric Altivar Machine ATV320 can control both asynchronous and synchronous motors. For asynchronous motors, it offers different control profiles, including voltage/frequency ratios and sensorless flux vector control.
For synchronous motors, it incorporates sensorless vector control, allowing the drive to be used in different machine architectures and to adapt drive behavior to the characteristics of the application.
Sensorless vector control allows the motor to be managed precisely even in applications requiring high dynamic performance. Schneider Electric highlights the ATV320 range’s ability to provide speed and torque accuracy at low speeds and respond to demanding machine applications.
It can also be configured to operate with 2-point or 5-point voltage/frequency ratios and includes energy-saving profiles.
The drive allows the output frequency to be adjusted between 0.1 and 599 Hz. This wide range makes it suitable for use with conventional motors as well as certain high-speed applications, always respecting the electrical and mechanical limits set by the motor and machine manufacturer.
Control parameter Value Output frequency 0.1-599 Hz Nominal switching frequency 4 kHz Adjustable switching frequency 2-16 kHz Asynchronous motor control Sensorless vector / voltage-frequency Synchronous motor control Sensorless vectorThe Altivar Machine ATV320 platform integrates safety functions designed to facilitate machine design in line with applicable functional safety requirements. Schneider Electric includes five safety functions configurable via SoMove software:
These functions can reduce the need for certain external components in compatible architectures, although the complete safety circuit must be designed according to the risk assessment and the standards applicable to the machine.
The ATV320U07N4C includes serial Modbus and CANopen communications as standard, making integration with PLCs, automation systems, and industrial control architectures easier.
In addition, the platform supports optional modules to expand communication possibilities. Schneider Electric offers options for:
The availability of each additional protocol depends on the installed communication module.
The drive has multiple inputs and outputs for integration into automation systems and for managing commands, speed references, and process signals.
Input / output Configuration Digital inputs 6 logic inputs + STO input DI5 input Programmable as pulse input up to 30 kHz Analog inputs 3 AI1 0-10 V DC AI2 ±10 V DC AI3 0-20 mA configurable Analog output 1The current analog input can be configured for different ranges, including 4-20 mA, allowing connection to sensors, controllers, and other devices commonly used in industrial automation.
The Altivar 320 includes an adjustable PID regulator, useful in applications where the drive must maintain a process variable such as pressure, flow, or speed based on a feedback signal.
This function allows the drive to be used in pumping, ventilation, and other regulation systems without necessarily requiring an external controller for basic regulation functions.
The ATV320U07N4C includes a factory-installed Class C2 EMC electromagnetic compatibility filter. This integration helps meet the electromagnetic compatibility requirements for the installation when the wiring, grounding, and mounting conditions specified by Schneider Electric are respected.
The drive includes an integrated braking chopper, allowing a compatible external braking resistor to be connected when the application requires handling regenerative energy during rapid deceleration or high-inertia movements.
It also offers braking to standstill by DC injection.
The ATV320 incorporates different internal monitoring and protection functions designed to protect the drive and motor against abnormal conditions.
These functions do not replace the external electrical protections that must be installed according to the characteristics of the supply network, the machine, and the applicable standards.
The final letter C in the reference identifies the version with a compact control block. This design is intended to optimize space inside the cabinet or machine frame.
The drive is installed vertically on a panel, with a mounting tolerance of ±10°. Schneider Electric allows compact installations while respecting the clearances and thermal conditions indicated in its documentation.
The ATV320U07N4C has an IP20 protection rating according to EN/IEC 61800-5-1. It is primarily intended to be integrated inside an electrical cabinet or enclosure that provides the required protection level for the installation environment.
Schneider Electric offers additional accessories to achieve certain enclosure configurations, including UL Type 1 conformity kits.
The drive can operate at an ambient temperature of -10 to +50 °C without derating. Operation can be extended up to +60 °C by applying the performance derating specified by Schneider Electric.
Environmental condition Value Operating temperature without derating -10 to +50 °C Maximum temperature with derating +60 °C Storage temperature -25 to +70 °C Transport temperature -25 to +70 °C Protection rating IP20The electronic boards of the Altivar Machine ATV320 have an environmental classification 3C3 according to IEC 60721-3-3, aimed at improving equipment resistance to certain environmental conditions present in industrial machinery.
The drive uses fan cooling and is designed to operate integrated into properly ventilated cabinets and machines.
Schneider Electric specifically targets the Altivar Machine ATV320 at machine builders and applications requiring advanced motor control.
The drive can be configured and diagnosed using Schneider Electric SoMove software. This tool allows parameter adjustment, drive function configuration, and work with the integrated safety functions within the conditions defined by the manufacturer.
The ATV320 can also be integrated into Schneider Electric automation architectures using DTM technology.
The Altivar Machine ATV320 is developed in accordance with international standards applicable to variable speed electric drives, including IEC/EN 61800-5-1 and IEC/EN 61800-3. The manufacturer’s documentation also includes different certifications and international markings depending on the market and configuration.
The Schneider Electric ATV320U07N4C offers a compact and advanced solution for controlling motors up to 0.75 kW in industrial machinery. Its three-phase 380-500 V supply, vector control, Modbus and CANopen communications, C2 EMC filter, integrated safety functions, and expansion possibilities via industrial networks make it suitable for a wide range of automation systems.